Browse > Article
http://dx.doi.org/10.12989/aas.2020.7.2.151

Numerical study of bonded composite patch repair in damaged laminate composites  

Azzeddine, Nacira (LMPM, Department of Mechanical Engineering, University of Sidi Bel Abbes)
Benkheira, Ameur (LMPM, Department of Mechanical Engineering, University of Sidi Bel Abbes)
Fekih, Sidi Mohamed (LMPM, Department of Mechanical Engineering, University of Sidi Bel Abbes)
Belhouari, Mohamed (LMPM, Department of Mechanical Engineering, University of Sidi Bel Abbes)
Publication Information
Advances in aircraft and spacecraft science / v.7, no.2, 2020 , pp. 151-168 More about this Journal
Abstract
The present study deals with the repair of composite structures by bonding composite patches. The composite structure is a carbon/epoxy laminate with stacking sequence [45/-45/0/90]S. The damaged zone is simulated by a central crack and repaired by bonding symmetrical composite patches. The repair is carried out using composite patches laminated from the same elemental folds as those of the cracked specimen. Three-dimensional finite element method is used to determine the energy release rate along the front of repaired crack. The effects of the repair technique used single or double patch, the stacking sequence of the cracked composite patch and the adhesive properties were highlighted on the variations of the fracture energy in mode I and mixed mode I + II loading.
Keywords
composite patch; laminates; stacking sequence; energy release rate;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 ABAQUS/CAE (2007), ABAQUS/CAE Ver 6.13 User's Manual, Hibbitt, Karlsson &Sorensen, Inc.
2 Benkheira, A., Belhouari, M. and Benbarek, S. (2018), "Comparison of double- and single- bonded repairs to symmetrical composite structures", J. Fail. Anal. Prevent., 18(6), 1601-1606. https://doi.org/10.1007/s11668-018-0557-7.   DOI
3 Breitzman, T.D., Iarve, E.V., Cook, B.M., Schoeppner, G.A. and Lipton, R.P. (2009), "Optimization of a composite scarf repaired patch under tensile loading", Compos. Part A Applied Sci. Manufact., 40(12), 1921-1930. https://doi.org/10.1016/j.compositesa.2009.04.033.   DOI
4 Brighenti, R., Carpinteri, A. and Vantadori, S. (2006), "A genetic algorithm applied to optimisation of patch repair for cracked plates", Comput. Meth. Appl. Mech. Eng., 196, 466-475. https://doi.org/10.1016/j.cma.2006.07.004.   DOI
5 Caminero, M.A., Pavlopoulou, S., Lopez-Pedrosa, M., Nicolaisson, B.G., Pinna, C. and Soutis, C. (2013), "Analysis of adhesively bonded repairs in composite: damage detection and prognosis", Compos. Struct., 95, 500-571. https://doi.org/10.1016/j.compstruct.2012.07.028.   DOI
6 Cheng, P., Gong, X.J., Aivazzadeh, S. and Xiao, X. (2014), "Experimental observation of tensile behavior of patch repaired composites", Polym. Test., 34, 146-154. https://doi.org/10.1016/j.polymertesting.2014.01.007.   DOI
7 Cheng, P., Gong, X.J., Hearn, D. and Aivazzadeh, S. (2011), "Tensile behaviour of patch-repaired CFRP laminates", Compos. Struct., 93(2), 582-589. https://doi.org/10.1016/j.compstruct.2010.08.021.   DOI
8 Cytec Engineered Materials (2009), FM73 Toughened Epoxy film - Technical sheet, 06-98, ref. (030702).
9 Davis, M. and Bond, D. (1999), "Principles and practices of adhesive bonded structural joints and repairs", Int. J. Adhes. Adhes., 19(2-3), 91-105. https://doi.org/10.1016/S0143-7496(98)00026-8.   DOI
10 Deheeger, A., Mathias, J.D. and Grediac M (2009), "A closed-form solution for the thermal stress distribution in rectangular metal/composite bonded joints", Int. J. Adhes. Adhes., 29(5), 515-524. https://doi.org/10.1016/j.ijadhadh.2008.10.004.   DOI
11 Duong, C.N. and Wang, C.H. (2007), Composite Repair: Theory and Design, Elsevier, The Netherlands.
12 Fekih, S.M., Albedah, A., Benyahia, F., Belhouari, M., Bachir Bouiadjra, B. and Miloudi, A. (2012), "Optimisation of the sizes of bonded composite repair in aircraft structures", Mater. Des., 41, 171-176. https://doi.org/10.1016/j.matdes.2012.04.025.   DOI
13 Fekih, S.M., Madani, K., Benbarek, S. and Belhouari, M. (2018), "Geometrical parameters optimizations of scarf and double scarf bounded joint", Adv. Aircraft Spacecraft Sci., 5(3), 401-410. https://doi.org/10.12989/aas.2018.5.3.401.   DOI
14 Floros, I.S., Tserpes, K.I. and Löbel, T. (2015), "Mode-I, mode-II and mixed-mode I+II fracture behavior of composite bonded joints: Experimental characterization and numerical simulation", Compos. Part B Eng., 78(1), 459-468. https://doi.org/10.1016/j.compositesb.2015.04.006.   DOI
15 Gong, X.J., Cheng, P., Aivazzadeh, S. and Xiao, X. (2015), "Design and optimization of bonded patch repairs of laminated composite structures", Compos. Struct., 123, 292-300. https://doi.org/10.1016/j.compstruct.2014.12.048.   DOI
16 Kim, H.S., Cho, M., Lee, J., Deheeger, A., Grediac, M. and Mathias, J.D. (2010), "Three dimensional stress analysis of a composite patch using stress functions", Int. J. Mech. Sci., 52(12), 1646-1659. https://doi.org/10.1016/j.ijmecsci.2010.08.006.   DOI
17 Heller, M. and Kaye, R. (2002), Shape Optimisation for Bonded Repairs, in Advances in the Bonded Composite Repair of Metallic Aircraft Structure, Elsevier, 269-315.
18 Holzhüter, D. and Sinapius, M. (2011), "Infusion technology for bonded CFRP repairs for aircraft primary structures", German Aerospace Centre (DLR), Braunschweig, Germany.
19 Kashfuddoja, M. and Ramji, M. (2013), "Whole-field strain analysis and damage assessment of adhesively bonded patch repair of CFRP laminates using 3D-DIC and FEA", Compos. Part B Eng., 53, 46-61. https://doi.org/10.1016/j.compositesb.2013.04.030.   DOI
20 Liu, X. and Wang, G. (2007), "Progressive failure analysis of bonded composite repairs", Compos. Struct., 81(3), 331-340. https://doi.org/10.1016/j.compstruct.2006.08.024.   DOI
21 Mathias, J.D., Balandraud, X. and Grediac, M. (2006), "Applying a genetic algorithm to the optimization of composite patches", Comput. Struct., 84, 823-834. https://doi.org/10.1016/j.compstruc.2005.12.004.   DOI
22 Mathias, J.D., Grediac, M. and Balandraud, X. (2006), "On the bidirectional stress distribution in rectangular bonded composite patches", Int. J. Solids Struct., 43(22-23), 6921-6947. https://doi.org/10.1016/j.ijsolstr.2006.02.016.   DOI
23 Ramji, M., Srilakshmi, R. and Prakash, M.B. (2013), "Towards optimization of patch shape on the performance of bonded composite repair using FEM", Compos. Part B Eng., 45(1), 710-720. https://doi.org/10.1016/j.compositesb.2012.07.049.   DOI
24 Mhamdia, R., Serier, B., Bachir Bouiadjra, B. and Belhouari, M. (2012), "Numerical analysis of the patch shape effects on the performances of bonded composite repair in aircraft structures", Compos. Part B Eng., 43(2), 391-397. https://doi.org/10.1016/j.compositesb.2011.08.047.   DOI
25 Naboulsi, S. and Mall, S. (1996), "Modelling of a cracked metallic structure with bonded composite patch using the three layer technique", Compos. Struct., 35(3), 295-308. https://doi.org/10.1016/0263-8223(96)00043-8.   DOI
26 Nakamura, T. and Parks, D.M. (1988), "Three dimensional stress field near the crack front of a thin elastic plate", J. Appl. Mech., 44, 804-813. https://doi.org/10.1115/1.3173725.
27 Pang, J.W.C. and Bond, I.P. (2005), "Bleeding composites - damage detection and self-repair using a biomimetic approach", Compos. Part A Applied Sci. Manufact., 36, 183-188. https://doi.org/10.1016/j.compositesa.2004.06.016.   DOI
28 Ramji, M. and Srilakshmi, R. (2012), "Design of composite patch reinforcement applied to mixed mode cracked panel using FEA", J. Reinf. Plast. Compos., 39(9), 585-595. https://doi.org/10.1177%2F0731684412440601.   DOI
29 Russell, A.J. and Bowers, C.P. (1992), "Repairing delamination with low viscosity epoxy resins", AGARD (Advisory Group for Aerospace Research & Developments) CP 530, Neuilly sur Seine, France.
30 Sethuraman, R. and Maiti, S.K. (1989), "Finite element analysis of doubly bonded crack-stiffened panels under mode I or mode II loading", Eng. Fract. Mech., 34(2), 465-475. https://doi.org/10.1016/0013-7944(89)90159-8.   DOI
31 Williams, G., Trask, R. and Bond, I. (2007), "A self-healing carbon fibre reinforced polymer for aerospace applications", Compos. Part A Applied Sci. Manufact., 38, 1525-1532. https://doi.org/10.1016/j.compositesa.2007.01.013.   DOI
32 Wuang, C.H. and Gunnion, A.J. (2009), "Optimum shapes of scarf repairs", Compos. Part A Applied Sci. Manufact., 40(9), 1407-1418. https://doi.org/10.1016/j.compositesa.2009.02.009.   DOI