Browse > Article
http://dx.doi.org/10.12989/aas.2018.5.3.349

Numerical simulation of the unsteady flowfield in complete propulsion systems  

Ferlauto, Michele (Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Cors Duca degli Abruzzi)
Marsilio, Roberto (Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Cors Duca degli Abruzzi)
Publication Information
Advances in aircraft and spacecraft science / v.5, no.3, 2018 , pp. 349-362 More about this Journal
Abstract
A non-linear numerical simulation technique for predicting the unsteady performances of an airbreathing engine is developed. The study focuses on the simulation of integrated propulsion systems, where a closer coupling is needed between the airframe and the engine dynamics. In fact, the solution of the fully unsteady flow governing equations, rather than a lumped volume gas dynamics discretization, is essential for modeling the coupling between aero-servoelastic modes and engine dynamics in highly integrated propulsion systems. This consideration holds for any propulsion system when a full separation between the fluid dynamic time-scale and engine transient cannot be appreciated, as in the case of flow instabilities (e.g., rotating stall, surge, inlet unstart), or in case of sudden external perturbations (e.g., gas ingestion). Simulations of the coupling between external and internal flow are performed. The flow around the nacelle and inside the engine ducts (i.e., air intakes, nozzles) is solved by CFD computations, whereas the flow evolution through compressor and turbine bladings is simulated by actuator disks. Shaft work balance and rotor dynamics are deduced from the estimated torque on each turbine/compressor blade row.
Keywords
propulsion system simulation; gas-turbines; compressible flows; CFD;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Chang, H., Zhao, W., Jin, D., Peng, Z. and Gui, X. (2014), "Numerical investigation of base-setting of stators stagger angles for a 15-stages axial flow compressor", J. Therm. Sci., 23(1), 36-44.   DOI
2 Chernyshenko, S.I. and Privalov, A.V. (2004), "Internal degree of freedom of an actuator disk model", J. Propul. Power, 20(1), 155-163.   DOI
3 Culley, D., Garg, S., Hiller, S.J., Horn, W., Kumar, A., Mathews, H.K. and Schadow, K. (2009), More Intelligent Gas Turbine Engines, RTO-TR-AVT-128.
4 Ferlauto, M., Larocca, F. and Zannetti, L. (2002), "Integrated design and analysis of intakes and nozzles in airbreathing engines", J. Propul. Pow., 18(1), 28-34.   DOI
5 Ferlauto, M. and Marsilio, R. (2009), "Numerical simulation of transient operations in aeroengines", Proceedings of the 8th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics (ETC8), Graz, Austria, March.
6 Ferlauto, M. and Rosa Taddei, S. (2015), "Reduced order modelling of full-span rotating stall for the flow control simulation of axial compressors", Proceedings of the Institution of Mechanical Engineering Part A: Journal of Powez Energy, 229(4), 359-366.
7 Fernandez-Villace, V. and Paniagua, G. (2013), "Numerical model of a variable-combined-cycle engine for dual subsonic and supersonic cruise", Energies, 6(2), 839-870.   DOI
8 Frederick, D.K., DeCastro, J.A. and Litt, J.S. (2007), User's Guide for the Commercial Modular Aero-Propulsion System Simulation(C-MAPPS), NASA Report No. TM-2007-215026.
9 Harten, A., Engquist, B., Osher, S. and Chakravarthy, S.R. (1987), "Uniformly high order accurate essentially non-oscillatory schemes, III", J. Comput. Phys., 71(2), 232-303.
10 Horlock, J.H. (1978), Actuator Disk Theory, McGraw-Hill, U.S.A.
11 Kopasakis, J., Connolly, J.W., Paxson, D.E. and Ma, P. (2010), "Volume dynamics propulsion system modeling for supersonics vehicle research", ASME J. Turbomach., 132(4), 041003.   DOI
12 Leonard, O. and Adam, O. (2008), "A quasi-one- dimensional model for multistage turbomachinery", J. Therm. Sci., 17(1), 7-20.   DOI
13 Litt, J.S., Liu, Y., Sowers, T.S., Owen, K. and Guo, T.H. (2015), "Validation of an integrated airframe and turbofan engine simulation for evaluation of propulsion control modes", Proceedings of the 53rd AIAA Aerospace Sciences Meeting, AIAA SciTech Forum, Florida, U.S.A., January.
14 Lytle, J.K. (1999), "The numerical propulsion system simulation: A multidisciplinary design system for aerospace vehicles", Proceedings of the 14th International Symposium on Air Breathing Engines, Florence, Italy, September.
15 Marsilio, R. (2005), "A computational method for gas turbine engines", Proceedings of the 53rd AIAA Aerospace Sciences Meeting, AIAA SciTech Forum, Florida, U.S.A., January.
16 McDaniel, J. (2012), "An overview of the national center for hypersonic combined-cycle propulsion", Proceedings of the NASA 2012 Fundamental Aeronautics Program Annual Meeting, Cleveland, U.S.A., March.
17 Parker, K.L. and Guo, T.H. (2003), Development of a Turbofan Engine Simulation in Graphical Simulation Environment, NASA Report No TM-2003-213543.
18 Sajben, M. (2004), "Model for multistage compressors to predict unsteady inlet-compressor interactions", J. Propul. Pow., 20(3), 492-500.   DOI
19 Seldner, K., Mihaloew, J.R. and Blaha, R.J. (1973), Generalized Simulation Technique for Turbojet Engine System Analysis, NASA TN D-6610.
20 Schmidtmann, O. and Anders, J.M. (2001), "Route to surge for a throttled compressor - a numerical study", J. Fluids Struct., 15(8), 1105-1121.   DOI
21 Sellers, J. and Daniele, C.J. (1974), Dyngen: A Program for Calculating Steady-State and Transient Performance of Turbojet and Turbofan Engines, NASA TM X-71552.
22 Wang, L. (2011), "A general multitask simulation package of aircraft engine", Proc. Eng., 12, 47-53.   DOI
23 Xu, L., Hynes, P.T. and Denton, J.D. (2003), "Towards long length scale unsteady modelling in turbomachines", IMechE Part A, J. Pow. Energy, 217(1), 75-82.   DOI
24 Zheng, J., Chen, M. and Tang, H. (2017), "Matching mechanism analysis on an adaptive cycle engine", Chin. J. Aeronaut., 30(2), 706-718.   DOI
25 Benek, I.A., Kraft, E.M. and Lauer, R.F. (1998), "Validation issues for engine-airframe integration", AIAA J., 36(5),759-764.   DOI