Browse > Article
http://dx.doi.org/10.12989/acc.2021.11.5.387

Performance evaluation of different shapes of headed bars in steel fiber reinforced concrete  

Sachdeva, Payal (Department of Civil Engineering, Thapar Institute of Engineering and Technology (Deemed to be University))
Danie Roy, A.B. (Department of Civil Engineering, Thapar Institute of Engineering and Technology (Deemed to be University))
Kwatra, Naveen (Department of Civil Engineering, Thapar Institute of Engineering and Technology (Deemed to be University))
Publication Information
Advances in concrete construction / v.11, no.5, 2021 , pp. 387-396 More about this Journal
Abstract
The behavior of headed bars in concrete is investigated through 108 pullout tests having an embedment depth of eight times the bar diameter in the M20 concrete mix. Headed bars are designed based on ASTM A970-16 and ACI 318-19 recommendations. The primary parameters used in this study are the steel bar diameter, the steel fibers percentage, and the head shapes. Three failure modes namely, Steel, Concrete-Blowout & Pull-Through failure have been observed. Based on load-deflection curves which are plotted to investigate the bond capacity of headed bars, it is observed that the circular-headed bars have displayed the highest peak load. The comparative analysis shows the smaller differences in the ultimate bond strength between MC2010 (0.89-2.26 MPa) and EN 1992-1-1 (2.32 MPa) as compared to ACI-318-19 (11-22 MPa) which is due to the absence of embedment depth and peak load factor in MC2010 and EN 1992-1-1 respectively.
Keywords
bond; bond strength; headed bar; load-deflection curves; pull-out test; steel fibers;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Hameed, R., Turatsinze, A., Duprat, F. and Sellier, A. (2013), "Bond stress-slip behaviour of steel reinforcing bar embedded in hybrid fiber-reinforced concrete", KSCE J. Civil Eng., 17(7), 1700-1707. https://doi.org/10.1007/s12205-013-1240-x.   DOI
2 Hawkins, N.M. (1967), "The bearing strength of concrete: 1. Loading through rigid plates covering part of the full spporting area", The University of Sydney, Research Report, 54.
3 Marchetto, F., Caldentey, A.P. and Peiretti, H.C. (2016), "Structural performance of corner joints subjected to a closing moment using mechanical anchorages: an experimental study", Struct. Concrete, 17(6), 987-1002. https://doi.org/10.1002/suco.201500222.   DOI
4 Papadopoulos, V., Murcia-Delso, J. and Shing, P.B. (2015), "Development length for headed bars in slab-column joints of RC slab bridges", Report No. SSRP-15/10, Dept. of Civil Engineering, University of California, San Diego, CA.
5 Park, H.K., Yoon, Y.S. and Kim, Y.H. (2003), "The effect of head plate details on the pull-out behavior of headed bars", Mag. Concrete Res., 55(6), 485-496. https://doi.org/10.1680/macr.2003.55.6.485.   DOI
6 Prince, M.J.R. and Singh, B. (2013), "Bond behavior of deformed steel bars embedded in recycled aggregate concrete", Constr. Build. Mater., 49, 852-862. https://doi.org/10.1016/j.conbuildmat.2013.08.031.   DOI
7 Rabi, M., Cashell, K.A., Shamass, R. and Desnerck, P. (2020), "Bond behaviour of austenitic stainless steel reinforced concrete", Eng. Struct., 221, 111027. https://doi.org/10.1016/j.engstruct.2020.111027.   DOI
8 Thompson, M.K., Jirsa, J.O., Breen, J.E. and Klinger, R.E. (2003), "Anchorage behavior of headed reinforcement", Report No. FHWA/TX-0-1855-1, Texas Department of Transportation, USA.
9 Shao, Y. (2016), "Anchorage of headed reinforcing bars in exterior beam-column joints", Ph.D. Dissertation.
10 Stoker, J.R., Boulware, R.L., Crozier, W.F. and Swirsky, R.A. (1974), "Anchorage devices for large diameter reinforcing bars", Caltrans Report No. CA-DOT-TL-6626-1-73-30.
11 ASTM A970/A970M (2016), Standard Specification for Headed Steel Bars for Concrete Reinforcement, ASTM International, West Conshohocken, pp 1-9.
12 Yang, J.M., Min, K.H., Shin, H.O. and Yoon, Y.S. (2010), "The use of T-headed bars in high-strength concrete members", Proceeding in Fracture Mechanics of Concrete and Concrete, Korea.
13 Yuji, I., Nishinosono, K., Iida, M. and Hirabayashi, M. (2016), "Steel fiber reinforced interior beam-column joints without shear reinforcement and beam bars passing through joint", Concrete J., 54(7), 694-701. https://doi.org/10.3151/COJ.54.7_694.   DOI
14 Wright, J.L. and McCabe, S.L. (1997), "The development length and anchorage behavior of headed reinforcing bars", Report No. 44, University of Kansas Center for Research, Lawrence, Kansas.
15 Metwally, I.M. (2014), "Three-dimensional finite element analysis of reinforced concrete slabs strengthened with epoxy-bonded steel plates", Adv. Concrete Constr., 2(2), 91-108. http://doi.org/10.12989/acc.2014.2.2.091.   DOI
16 Miao, T. and Zheng, W. (2019), "Local bearing capacity of concrete under the combined action of pressure force and bond stress", Constr. Build. Mater., 226, 152-161. https://doi.org/10.1016/j.conbuildmat.2019.07.288.   DOI
17 ACI 408 (2014), Bond and Development of Straight Reinforcing Bars in Tension, American Concrete Institute, Detroit, Michigan.
18 ACI 318-19 (2019), Building Code Requirements for Structural Concrete, American Concrete Institute, Detroit, Michigan.
19 Marchetto, F. (2015), "Use of headed reinforcement bars in construction", Ph.D. Dissertation.
20 Alrasyid, H., Yoganata, Y.S., Suluch, M. and Iranata, D. (2017), "Headed reinforcement in concrete structure: State of the art", AIP Conference Proceedings, 1903(1), 020015-1-020015-7.   DOI
21 Chiu, C.K., Chi, K.N. and Lin, K.C. (2016), "Experimental investigation on the seismic Anchorage behavior of headed bars based on full-size specimens of exterior and interior beamcolumn joints", Adv. Struct. Eng., 19(5), 777-794. https://doi.org/10.1177/1369433216630346.   DOI
22 EN 1992-1-1 (2004), Eurocode 2: Design of Concrete StructuresPart 1.1: General Rules and Rules for Buildings, Brussels, Belgium.
23 Kang, T.H.K., Ha, S.S. and Choi, D.U. (2010), "Bar pullout tests and seismic tests of small-headed bars in beam-column joints", ACI Struct. J., 107(1), 32-42.
24 Naito, J.N., Moehle, J.P. and Mosalam, K.M. (2001), "Experimental and computational evaluation of reinforced concrete bridge beam-column connections for seismic performance", Caltrans Contract No. 59A131, University of California, Berkeley.
25 Choi, D.U., Hong, S.G. and Lee, C.Y. (2002), "Test of headed reinforcement in pullout", KCI Concrete J., 14(3), 102-110.
26 Dancygier, A.N., Katz, A. and Wexler, U. (2010), "Bond between deformed reinforcement and normal and high-strength concrete with and without fibers", Mater. Struct., 43(6), 839-856. https://doi.org/10.1617/s11527-009-9551-6.   DOI
27 Delhomme, F., Roure, T. and Arrieta, B. and Limam, A. (2016), "Pullout behavior of cast-in-place headed and bonded anchors with different embedment depths", Mater. Struct., 49(5), 1843-1859. https://doi.org/10.1617/s11527-015-0616-4.   DOI
28 Choi, D.U. (2006), "Test of headed reinforcement in pullout II: Deep embedment", Int. J. Concrete Struct. Mater., 18(3E), 151-159. https://doi.org/10.4334/IJCSM.2006.18.3E.151.   DOI
29 Delhomme, F., Roure, T., Arrieta, B. and Limam, A. (2015), "Static and cyclic pullout behavior of cast-in-place headed and bonded anchors with large embedment depths in cracked concrete", Nucl. Eng. Des., 287, 139-150. https://doi.org/10.1016/j.nucengdes.2015.03.012.   DOI
30 DeVries, R.A. (1996), "Anchorage of headed reinforcement in concrete", Ph.D. Dissertation, 1-314.
31 fib, MC2010 (2012), Model Code for Concrete Structures, International Federation for Structural Concrete, Berlin, Ernest & John.
32 Ganesan, N., Indira, P.V. and Ruby, A. (2007), "Steel fiber reinforced high-performance concrete beam-column joints subjected to cyclic loading", ISET J. Earthq. Technol., 44, 445-456.
33 Ghali, A. and Youakim, S.A. (2005), "Headed studs in concrete: State of the art", ACI Struct., 102(5), 657-667.