Browse > Article
http://dx.doi.org/10.12989/acc.2019.7.2.097

Effect of coarse aggregates and sand contents on workability and static stability of self-compacting concrete  

Mohamed, Sahraoui (Structures Rehabilitation and Materials Laboratory (SREML), University Amar Telidji)
Taye, Bouziani (Structures Rehabilitation and Materials Laboratory (SREML), University Amar Telidji)
Publication Information
Advances in concrete construction / v.7, no.2, 2019 , pp. 97-105 More about this Journal
Abstract
In this paper, the workability and static stability were evaluated using a proposed test method. Workability and static stability represent a key property of self-compacting concrete (SCC) in fresh state. A number of standardized test methods were developed to assess these properties. However, no accelerated test method reliably predicts both workability and static stability of SCC. In the present work, a modified K-slump test method was developed to evaluate workability and static stability of SCC. In order to take implicit mixture variations of SCC constituents that can affect fresh SCC properties, a central composite design was adopted to highlight the effect of gravel to sand ratio (G/S), gravel 3/8 to gravel 8/15 ratio (G1/G2), water to cement ratio (W/C), marble powder to cement ratio (MP/C) and superplasticizer content (SP) on workability measured with slump and flow time (T50) tests and static stability measured with sieve stability test (Pi), segregation test index (SSI), Penetration test (Pd) and the proposed K-slump test (Km). The obtained results show that G/S ratio close to 1 and G1/G2 ratio close to 60% can be considered as optimal values to achieve a good workability while ensuring a sufficient static stability of SCC. Acceptable relationships were obtained between Slump flow, Pi, Pd and Km. Results show that the proposed K-slump test allow to assess both workability and static stability of fresh SCC mixtures.
Keywords
coarse aggregates; sand; workability; static stability; modified K-slump test; SCC;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Khayat, K.H., Hu, C. and Laye, J.M. (2002), "Importance of aggregate packing density on workability of self-consolidating concrete", Proceedings of the First North American Conference on Design and Use of Self-Consolidating Concrete, Center for Advanced Cement-Based Materials.
2 Li, L.G. and Kwan, A.K. (2015), "Effects of superplasticizer type on packing density, water film thickness and flowability of cementitious paste", Constr. Build. Mater., 86, 113-119.   DOI
3 Ling, S.K. and Kwan, A.K.H. (2015), "Adding ground sand to decrease paste volume, increase cohesiveness and improve passing ability of SCC", Constr. Build. Mater., 84, 46-53.   DOI
4 Long, G., Liu, H., Ma, K., Xie, Y. and Li, W. (2017), "Development of high-performance self-compacting concrete applied as the filling layer of high-speed railway", J. Mater. Civil Eng., 30(2), 04017268.   DOI
5 Mesbah, H.A., Yahia, A. and Khayat, K.H. (2010), "Validation of electrical conductivity method to assess static stability of SCC", Proceedings 6th International RILEM Symposium on Self-Compacting Concrete, Montreal, Canada, September.
6 Montgomery, D.C. (2008), Design and Analysis of Experiments, John Wiley & Sons.
7 Murali, T.M. and Kandasamy, S. (2009), "Mix proportioning of high performance self-compacting concrete using response surface methodology", Open Civil Eng. J., 3, 93-97.   DOI
8 Naji, S., Khayat, K.H. and Karray, M. (2017), "Assessment of static stability of concrete using shear wave velocity approach", ACI Mater. J., 114(1), 105-115.
9 Nasser, K.W. (1976), "New and simple tester for slump of concrete", J. Proc., 73(10), 561-565.
10 Nasser, K.W. and Biswas, S. (1996), "A new method and apparatus for evaluation of the K-slump of concrete", Can. J. Civil Eng., 23(1), 124-133.   DOI
11 Nunes, S., Figueiras, H., Oliveira, P.M., Coutinho, J.S. and Figueiras, J. (2006), "A methodology to assess robustness of SCC mixtures", Cement Concrete Res., 36(12), 2115-2122.   DOI
12 Okamura, H., Maekawa, K. and Ozawa, K. (1993), High Performance Concrete, Gihoudou Publisher, Tokyo, Japan.
13 Petrou, M.F., Wan, B., Gadala-Maria, F., Kolli, V.G. and Harries, K.A. (2000), "Influence of mortar rheology on aggregate settlement", ACI Mater. J., 97(4), doi: 10.14359/7415.
14 Rezaifar, O., Hasanzadeh, M. and Gholhaki, M. (2016), "Concrete made with hybrid blends of crumb rubber and metakaolin: optimization using response surface method", Constr. Build. Mater., 123, 59-68.   DOI
15 Sebaibi, N., Benzerzour, M., Sebaibi, Y. and Abriak, N.E. (2013), "Composition of self-compacting concrete (SCC) using the compressible packing model, the Chinese method and the European standard", Constr. Build. Mater., 43, 382-388.   DOI
16 Shen, L., Struble, L. and Lange, D. (2005), "Testing static segregation of SCC", Proceedings of the 2nd North American Conference on The Design and Use of SCC, SCC2005.
17 Sonebi, M., Rooney, M. and Bartos, P.J.M. (2005), "Evaluation of the segregation resistance of fresh self-compacting concrete using different test methods", SCC'2005: 1st International Symposium on Design, Performance and Use of Self-Consolidating Concrete, RILEM Publications SARL, China.
18 Van, B.K., Montgomery, D.G., Hinczak, I. and Turner, K. (1998), "Rapid testing methods for segregation resistance and filling ability of self-compacting concrete", Spec. Publ., 179, 85-104.
19 AFGC (2008), Association Francaise de Genie Civil, Recommendations for use of self- Compacting Concrete, Scientific and technical documents, P N B@P.
20 Yahia, A. and Aitcin, P.C. (2016), "Self-consolidating concrete", Science and Technology of Concrete Admixtures, Woodhead Publishing, Elsevier, Sawston, UK.
21 Aitcin, P.C. (2000), "Cements of yesterday and today: concrete of tomorrow", Cement Concrete Res., 30(9), 1349-1359.   DOI
22 ASTM C 1610 (2017), Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique, ASTM International, West Conshohocken, PA.
23 ASTM C1362-97 (2002), Standard Test Method for Flow of Freshly Mixed Hydraulic Cement Concrete, ASTM International, West Conshohocken, PA.
24 ASTM C1712 (2014), Standard Test Method for Rapid Assessment of Static Segregation Resistance of Self-Consolidating Concrete Using Penetration Test, ASTM International, West Conshohocken, PA.
25 Bensebti, S., Aggoune, S. and Houari, H. (2007), "Essai de caracterisation experimentale de la segregation verticale des betons autoplacants", Sci. Technol. B., 25, 59-64.
26 EFNARC (2005), The European Guidelines for Self-Compacting Concrete: Specification, Production and Use, The Self-Compacting Concrete European Project Group.
27 Bouziani, T. (2013), "Assessment of fresh properties and compressive strength of self-compacting concrete made with different sand types by mixture design modelling approach", Constr. Build. Mater., 49, 308-314.   DOI
28 Bouziani, T. (2018), "A simple test method to assess slump flow and stability of self-compacting concrete", Comput. Concrete, 21(2), 111-116.   DOI
29 Bouziani, T., Benmounah, A. and Bederina, M. (2012), "Statistical modelling for effect of mix-parameters on properties of highflowing sand-concrete", J. Central South Univ., 19(10), 2966-2975.   DOI
30 Bui, V.K, Montgomery, D., Hinczak, I. and Turner, K. (2002), "Rapid testing method for segregation resistance of selfcompacting concrete", Cement Concrete Res., 32(9), 1489-1496.   DOI
31 EN 12350-11 (2010), Partie Beton Autoplacants-Essai de Stabilite au Tamis.
32 EN 12350-8 (2010), Testing Fresh Concrete, Part 8.
33 Ghoddousi, P., Javid, A.A.S and Sobhani, J. (2014), "Effects of particle packing density on the stability and rheology of selfconsolidating concrete containing mineral admixtures", Constr. Build. Mater., 53, 102-109.   DOI
34 Khayat, K.H., Ghezal, A. and Hadriche, M.S. (1999), "Factorial design models for proportioning self-consolidating concrete", Mater. Struct., 32, 679-686.   DOI
35 Khayat, K.H., Ghezal, A. and Hadriche, M.S. (2000), "Utility of statistical models in proportioning self-consolidating concrete", Mater. Struct., 33(5), 338-344.   DOI