Browse > Article
http://dx.doi.org/10.12989/acc.2018.6.2.159

Durability properties of concrete containing metakaolin  

Nas, Memduh (Department of Civil Engineering, Karadeniz Technical University)
Kurbetci, Sirin (Department of Civil Engineering, Karadeniz Technical University)
Publication Information
Advances in concrete construction / v.6, no.2, 2018 , pp. 159-175 More about this Journal
Abstract
The main aim of this study is to investigate the possible effects of metakaolin on strength and durability properties of concrete. For this purpose, concrete mixtures are produced by substituting cement with metakaolin 0, 5, 10 and 20% by weight. The amount of binder for the concrete mixtures are 300 and $400kg/m^3$ with a constant water to cement ratio of 0.6. Compressive and bending strengths, freeze-thaw and high-temperature resistances, capillary coefficients and rapid chloride permeability properties were determined and compared each other. Because of all the experiments conducted, it has been found that the use of metakaolin as a pozzolanic additive in concrete have positive effects especially on compressive and bending strengths, capillary, rapid chloride permeability, freeze-thaw resistance, and high temperatures, up to $800^{\circ}C$. The results indicated that the performance of concrete can be enhanced by metakaolin. Particularly, compressive strength and durability properties have found to be improved with increasing metakaolin content which is attributed to pozzolanic activity and filler effect. Furthermore, metakaolin has relatively positive impacts under elevated temperatures and freeze-thaw effects. However, almost all the strengths of entire concrete specimens are lost at $800^{\circ}C$. Consequently, the optimum metakaolin substitution ratio can be suggested to be 20% as per this study.
Keywords
metakaolin; strength; durability; freeze-thaw; elevated temperature; rapid chloride permeability;
Citations & Related Records
Times Cited By KSCI : 6  (Citation Analysis)
연도 인용수 순위
1 ASTM C1583 (2013), Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes, American Society for Testing and Materials, Philadelphia, U.S.A.
2 ASTM C666 (2015), Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing, American Society for Testing and Materials, Philadelphia, U.S.A.
3 Bai, J., Wild, S. and Sabir, B.B. (2002), "Sorptivity and strength of air-cured and water-cured PC-PFA-MK concrete and the influence of binder composition on carbonation depth", Cement Concrete. Res., 32, 1813-1821.   DOI
4 Baradan, B., Yazici, H. and UN, H. (2010), Beton ve Betonarme Yapilarda Kalicilik(Durabilite), Turkey Ready Mixed Concrete Association, Istanbul.
5 Bredy, P., Chabannet, M. and Pera, J. (1989), "Microstructure and porosity of metakaolin blended cements", Proc. Mater. Res. Soc. Symp., 137, 431-436.
6 Caldarone, M.A., Gruber, K.A. and Burg, R.G. (1994), "High reactivity metakaolin: a new generation mineral admixture", Mod. Steel Constr., 16(11), 37-40.
7 Cassagnabere, F., Mouret, M., Escadeillas, G., Broilliard, P. and Bertrand, A. (2010), "Metakaolin, a solution for the precast industry to limit the clinker content in concrete: Mechanical aspects", Constr. Build. Mater., 24, 1109-1118.   DOI
8 Chan, Y.N., Peng, G.F. and Anson, M. (1999), "Residual strength and pore structure of high-strength concrete and normal strength concrete after exposure to high temperatures", Cement Concrete Compos., 21, 23-27.
9 Choate, W.T. (2003), "Energy and emission reduction opportunities for the cement industry. Department of energy", Office of Energy Efficiency and Renew. Energy, Columbia, MD, USA.
10 Dhinakaran, G., Thilgavathi, S. and Venkataramana, J. (2012), "Compressive strength and chloride resistance of metakaolin concrete", KSCE J. Civil Eng., 16(7), 1209-12017.   DOI
11 Guneyisi, E. and Mermerdas, K. (2007b), "Comparative study on strength, sorptivity, and chloride ingress characteristics of air-cured and water-cured concretes modified with metakaolin", Mater. Struct, 40(10), 1161-1171   DOI
12 Frias, M. and Cabrera, J. (2000), "Pore size distribution and degree of hydration of metakaolin-cement pastes", Cement Concrete Res., 30, 561-569.   DOI
13 Fu, Y., Wong, Y., Poon, C. and Tang, C. (2006), "Literature review of study on mechanism of explosive spalling in concrete at elevated temperatures", Jianzhu Cailiao Xuebao/J. Build. Mater., 9(3), 323-329.
14 Goncalves, J.P., Tavares, L.M, Toledo Filho, R.D. and Fairbairn, E.M.R. (2009), "Performance evaluation of cement mortars modified with metakaolin or ground brick", Constr. Build. Mater., 23, 1971-1979.   DOI
15 Guneyisi, E. and Gesoglu, M. (2008), "Improving strength, drying shrinkage, and pore structure of concrete using metakaolin", Mater. Struct., 41, 937-949.   DOI
16 Guneyisi, E. and Mermerdas, K. (2007a), "Effect of metakaolin and foundry sand on the near surface characteristics of concrete", Constr. Build. Mater., 25(8), 3257-3266.   DOI
17 Guneyisi, E., Gesoglu, M., Karaoglu, S. and Mermerdas, K. (2012), "Strength, permeability and shrinkage cracking of silica fume and metakaolin concretes", Constr. Build. Mater., 34, 120-130.   DOI
18 Hager, I. (2013), "Behaviour of cement concrete at high temperature", Bull. Pol. Acad. Sci.-Tech., 61(1), 145-154.
19 Fares, H., Remond, S., Noumowe, A. and Cousture, A. (2010), "High temperature behaviour of selfconsolidating concrete microstructure and physicochemical properties", Cement Concrete Res., 40, 488-96.   DOI
20 Joshaghani, A., Moeini, M.A. and Balapour, M. (2017), "Evaluation of incorporating metakaolin to evaluate durability and mechanical properties of concrete", Adv. Concrete Constr., 5(3), 241-255.   DOI
21 Lenka, S. and Panda, K.C. (2017), "Effect of metakaolin on the properties of conventional and self compacting concrete", Adv. Concrete Constr., 5(1), 31-48.   DOI
22 Kadri, E., Kenai, S., Karim, E., Siddique, R. and De Schutter, G. (2011), "Influence of metakaolin and silica fume on the heat of hydration and compressive strength development of mortar", Appl. Clay Sci., 53, 704-708.   DOI
23 Khatib, J.M. and Wild, S. (1996), "Pore size distribution of metakaolin paste", Cement Concrete Res., 26(10), 1545-1533.   DOI
24 Kostuch, J.A., Walters, G.V. and Jones, T.R. (1993), "High performance concrete incorporating metakaolin - a review", Concrete 2000, University of Dundee.
25 Li, C., Sun, H. and Li, L. (2010), "A review: The comparison between alkali-activated slag (Si+Ca) and metakaolin (Si+Al) cements", Cement Concrete Res., 40, 1341-1349.   DOI
26 Li, Q., Geng, H., Huang, Y. and Shui, Z. (2015), "Chloride resistance of concrete with metakaolin addition and seawater mixing: a comparative study", Constr. Build. Mater., 101, 184-192.   DOI
27 Morsy, M.S., Al-Salloum, Y.A., Abbas, H. and Alsayed, S.H. (2012), "Behavior of blended cement mortars containing nano-metakaolin at elevated temperatures", Constr. Build. Mater., 35, 900-905.   DOI
28 Morsy, M.S., Rashad, A.M. and El-Noughy, H.A. (2009), "Effect of elevated temperature on physicomechanical properties of metakaolin blended cement mortar", Struct. Eng. Mech., 31(1), 1-10.   DOI
29 Poon, C.S., Azhar, S., Anson, M. and Wong, Y.S. (2003), "Performance of metakaolin concrete at elevated temperatures", Cement Concrete Compos., 25(1), 83-89.   DOI
30 Peng, G. and Huang, Z. (2008), "Change in microstructure of hardened cement paste subjected to elevated temperatures", Constr. Build. Mater., 22(4), 593-599.   DOI
31 Saad. M., Abo-El-Enein. S.A., Hanna, G.B. and Kotkata, M.F. (1996), "Effect of temperature on physical and mechanical properties of concrete containing silica fume", Cement Concrete Res., 26(5), 669-675.   DOI
32 Poon, C.S., Kou, S.C. and Lam, L. (2006), "Compressive strength, chloride diffusivity and pore structure of high performance metakaolin and silica fume concrete", Constr. Build. Mater., 20(10), 858-865.   DOI
33 Qian, X. and Li, Z. (2001), "The relationships between stress and strain for high-performance concrete with metakaolin", Cement Concrete Res., 31, 1607-1611.   DOI
34 Ramezanianpour, A.A. and Jovein, H.B. (2012), "Influence of metakaolin as supplementary cementing material on strength and durability of concretes", Constr. Build. Mater., 30 , 470-479.   DOI
35 Sabir, B.B., Wild, S. and Bai, J. (2001), "Metakaolin and calcined clays as Pozzolans for concrete: a review", Cement Concrete Compos., 23(6), 441-54.   DOI
36 Saridemir, M., Secercan, M.H. and Celikten, S. (2017), "Mechanical properties of SFRHSC with metakaolin and ground pumice: Experimental and predictive study", Steel Compos. Struct., 23(5), 543-555.   DOI
37 Siddique, R. (2008), Waste Materials and By-Products in Concrete, Springer-Verlag Berlin Heidelberg, Berlin, Germany.
38 Tasdemir, C. (2003), "Combined effects of mineral admix- tures and curing conditions on the sorptivity coefficient of concrete", Cement Concrete Res., 33, 1637-1642.   DOI
39 Sun, S.H., Ma, J.T., Pang, X.M., Sun, Y.T. and Wang, S.L. (2005), "Sulfur reduction additive prepared from acid - modified kaolin", Bull. Catal. Soc. India, 4, 72-78.
40 Tabatabaeian, M., Khaloo, A., Joshaghani, A. and Hajibandeh, E. (2017), "Experimental investigation on effects of hybrid fibers on rheological, mechanical, and durability properties of high-strength SCC", Constr. Build. Mater., 147, 497-509.   DOI
41 Taylor, H.F.W. (1997), Cement Chemistry, 2nd Edition, Thomas Telford Services Ltd., London.
42 TS EN 12390-3 (2010), Testing Hardened Concrete-Part 3: Compressive Strength of Test Specimens, Ankara, Turkey.
43 TS EN 12390-5 (2010), Testing Hardened Concrete-Part 5: Flexural Strength of Test Specimens, Ankara, Turkey.
44 TS EN 1363-1 (2013), Fire resistance tests-Part 1. General requirements. Turkish Standards Institution, Ankara, Turkey.
45 TS EN-197-1 (2012), Cements-Part 1: Compositions and conformity criteria for common cements, Ankara, Turkey.
46 Wild, S. and Khatib, J.M. (1997), "Portlandite consumption in metakaolin cement pastes and mortars", Cement Concrete Res., 27(1), 137-146.   DOI
47 Wild, S., Khatib, J.M. and Jones, A. (1996), "Relative strength, pozzolanic activity and cement hydration in superplasticised metakaolin concrete", Cement Concrete Res., 26(10), 1537-1544.   DOI
48 Aquino, W., Lange, D.A. and Olek, J. (2001), "The influence of metakaolin and silica fume on the chemistry of alkali-silica reaction products", Cement. Concrete Comp., 23, 485-493.   DOI
49 Abdul Razak, H., Chai, H.K. and Wong, H.S. (2004), "Near surface characteristics of concrete containing supplementary cementing materials", Cement. Concrete Compos., 26, 883-889.   DOI
50 Akcay, B., Sengul, C. and Tasdemir M.A. (2016), "Fracture behavior and pore structure of concrete with metakaolin", Adv. Concrete. Constr., 4(2), 71-88.   DOI
51 ASTM C1202 (2012), Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration, American Society for Testing and Materials, Philadelphia, U.S.A.
52 ASTM C150 (2004), Standard Specification for Portland Cement, American Society of Testing and Materials, Philadelphia, U.S.A.