Browse > Article
http://dx.doi.org/10.12989/acc.2017.5.3.257

RCC frames with ferrocement and fiber reinforced concrete infill panels under reverse cyclic loading  

Ganesan, N. (Department of Civil Engineering, National Institute of Technology Calicut)
Indira, P.V. (Department of Civil Engineering, National Institute of Technology Calicut)
Irshad, P. (Department of Civil Engineering, National Institute of Technology Calicut)
Publication Information
Advances in concrete construction / v.5, no.3, 2017 , pp. 257-270 More about this Journal
Abstract
An experimental investigation was carried out to study the strength and behavior of reinforced cement concrete (RCC) frames with ferrocement and fiber reinforced concrete infill panel. Seven numbers of $1/4^{th}$ scaled down model of one bay-three storey frames were tested under reverse cyclic loading. Ferrocement infilled frames and fiber reinforced concrete infilled frames with varying volume fraction of reinforcement in infill panels viz; 0.20%, 0.30%, and 0.40% were tested and compared with the bare frame. The experimental results indicate that the strength, stiffness and energy dissipation capacity of infilled frames were considerably improved when compared with the bare frame. In the case of infilled frames with equal volume fraction of reinforcement in infill panels, the strength and stiffness of frames with fiber reinforced concrete infill panels were slightly higher than those with ferrocement infill panels. Increase in volume fraction of reinforcement in the infill panels exhibited only marginal improvement in the strength and behavior of the infilled frames.
Keywords
ferrocement; fiber reinforced concrete; infill panel; reinforced concrete frame; cyclic loading;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Zovkic, J., Sigmund, V. and Guljas, I. (2013), "Cyclic testing of a single bay reinforced concrete frames with various types of masonry infill panel", Earthq. Eng. Struct. Dyn., 42(8), 1131-1149.   DOI
2 Swamy, R.N. (1984), New Reinforced Concretes, Surrey University Press, London, U.K.
3 Turk, A.M., Ersoy, U. and Ozcebe, G. (2006), "Effect of introducing RC infill panel on seismic performance of damaged RC frames", Struct. Eng. Mech., 23(5), 469-486.   DOI
4 Altin, S., Ersoy, U. and Tankut, T. (1992), "Hysteretic response of reinforced concrete infilled frames", J. Struct. Div., 118(8), 2133-2150.   DOI
5 Anil, O. and Altin, S. (2007), "An experimental study on reinforced concrete partially infilled frames", Eng. Struct., 29(3), 449-460.   DOI
6 Baran, M. and Tankut, T. (2011), "Experimental study on seismic strengthening of reinforced concrete frames by precast concrete panels", ACI Struct. J., 108(2), 227-237.
7 Canbay, E., Ersoy, U. and Ozcebe, G. (2003), "Contribution of reinforced concrete infill panels to the seismic behavior of structural systems", ACI Struct. J., 100(5), 637-643.
8 Colangelo, F. (2005), "Pseudo-dynamic response of reinforced concrete frames infilled with non-structural brick masonry", Earthq. Eng. Struct. Dyn., 34(10), 1219-1241.   DOI
9 Duvarci, M. (2003), "Seismic strengthening of reinforced concrete frames with precast concrete panels", M.S. Dissertation, Middle East Technical University, Ankara, Turkey.
10 Frosch, R.J., Li, W., Kreger, M.E. and Jirsa, J.O. (1996), "Seismic strengthening of a non ductile RC frame using precast infill panels", Proceedings of the 11th World Conference on Earthquake Engineering, Acapulco, Mexico.
11 Hayashi, Y., Niwa, H. and Fukuhara, M. (1980), "The strengthening method of the existing R/C buildings", Proceedings of the 7th World Conference on Earthquake Engineering, Istanbul, Turkey.
12 IS 10262 (2009), Concrete Mix Proportioning-Guidelines, Bureau of Indian Standards, New Delhi, India.
13 IS 1489 (Part I) (1991), Portland Pozzolona Cement Specifications, Part I, Fly Ash Based, Bureau of Indian Standards, New Delhi, India.
14 IS 383 (1970), Specification for Coarse and Fine Aggregates from Natural Sources for Concrete, Bureau of Indian Standards, New Delhi, India.
15 Kahn, L.F. and Hanson, R.D. (1979), "Infilled walls for earthquake strengthening", J. Struct. Div., 105(2), 283-296.
16 Kesner, K. and Billington, S.L. (2005), "Investigation of infill panels made from engineered cementitious composites for seismic strengthening and retrofit", J. Struct. Eng., 131(11), 1712-1720.   DOI
17 Li, B.X., Wang, Z., Mosalam, K.M. and Xie, H.P. (2008), "Wenchuan earthquake field reconnaissance on reinforced concrete framed buildings with and without masonry infill panel walls", Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China.
18 Sezen, H., Whittaker, A.S., Elwood, K.J. and Mosalam, K.M. (2003), "Performance of reinforced concrete buildings during the August 17, 1999 Kocaeli, Turkey earthquake, and seismic design and construction practise in Turkey", Eng. Struct., 25(1), 103-114.   DOI
19 Mehrabi, A.B., Shing, P.B., Schuller, M.P. and Noland, J.L. (1996), "Experimental evaluation of masonryinfilled RC frames", J. Struct. Eng., 122(3), 228-237.   DOI
20 Misir, I.S., Ozcelik, O., Girgin, S.C. and Kahraman, S. (2012), "Experimental work on seismic behavior of various types of masonry infilled RC frames", Struct. Eng. Mech., 44(6), 763-774.   DOI
21 Sonuvar, M., Ozcebe, G. and Ersoy, U. (2004), "Rehabilitation of reinforced concrete frames with reinforced concrete infill panels", ACI Struct. J., 101(4), 494-500.
22 Susoy, M. (2004), "Seismic strengthening of masonry infilled reinforced concrete frames with precast concrete panels", M.S. Dissertation, Middle East Technical University, Ankara, Turkey.