Browse > Article
http://dx.doi.org/10.12989/acc.2015.3.4.269

A new approach for measurement of anisotropic tensile strength of concrete  

Sarfarazi, Vahab (Department of Mining Engineering, Hamedan University of Technology)
Faridi, Hamid R. (Department of materials science and metallurgy, Hamedan University of Technology)
Haeri, Hadi (Post doctoral fellow in Civil Engineering, Department of Civil Engineering, Sharif University of Technology, Member of National Elites Foundation)
Schubert, Wulf (Institu for Rock Mechanic and Tunnelling, Graz University of Technology)
Publication Information
Advances in concrete construction / v.3, no.4, 2015 , pp. 269-282 More about this Journal
Abstract
In this paper, a compression to tensile load converter device was developed to determine the anisotropic tensile strength of concrete. The samples were made from a mixture of water, fine sand and cement, respectively. Concrete samples with a hole at its center was prepared and subjected to tensile loading using the compression to tensile load converter device. A hydraulic load cell applied compressive loading to converter device with a constant pressure of 0.02 MPa per second. Compressive loading was converted to tensile stress on the sample because of the overall test design. The samples have three different configurations related to loading axis; 0, $45^{\circ}$, $-45^{\circ}$. A series of finite element analysis were done to analyze the effect of hole diameter on stress concentration of the hole side along its horizontal axis to provide a suitable criterion for determining the real tensile strength of concrete. Concurrent with indirect tensile test, Brazilian test and three point loading test were also performed to compare the results from the three methods. Results obtained by this device were quite encouraging and show that the tensile strengths of concrete were similar in different directions because of the homogeneity of bonding between the concrete materials. Also, the indirect tensile strength was clearly lower than the Brazilian test strength and three point loading test.
Keywords
compression to tensile load converter device; CTT; anisotropic tensile strength of concrete;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Brady, B.H.G. and Brown E.T. (2006), Concrete Mechanics for Underground Mining, 3rd Edition, Chapman & Hall, London.
2 BS1881-117 (1983), Testing Concrete - Method for determination of tensile splitting strength, British Standards Institute, London.
3 BS1881-118 (1983), Testing Concrete - Method for determination of flexural strength, British Standards Institute, London, U.K.
4 Calixto, J.M.F. (2002), "Experimental investigation of tensile behavior of high strength concrete", Mater. Res. J., 5(3), 295-303.   DOI
5 Gerges, N.N., Issa, C.A. and Fawaz, S. (2015), "Effect of construction joints on the splitting tensile strength of concrete", Case Studies Constr. Mater., 3, 83-91.   DOI
6 Gomez, J.T., Shukla, A. and Sharma, A. (2001), "Static and dynamic behavior of concrete and granite in tension with damage", Theor. Appl. Fract. Mech., 36(1), 37-49.   DOI
7 Kim, J.J. and Reda Taha, M. (2014), "Experimental and numerical evaluation of direct tension test for cylindrical concrete specimens", Adv. Civil Eng., 2014, 8
8 Larrard, F, Malier, Y. (1992), Engineering Properties of Very High Performance Concrete, Ed. Malier, Y., High Performance Concrete, From Material to Structure, London.
9 Liu, X., Nie, Z., Wu, S. and Wang, C. (2015), "Self-monitoring application of conductive asphalt concrete under indirect tensile deformation", Case Studies Constr. Mater., 3, 70-77.   DOI
10 Van Mier, J.G.M. and Van Vliet, M.R.A. (2002), "Uniaxial tension test for the determination of fracture parameters of concrete: state of the art", Eng. Fract. Mech., 69(2), 235-247.   DOI
11 Mobasher, B., Bakhshi, M. and Barsby, C. (2014), "Backcalculation of residual tensile strength of regular and high performance fiber reinforced concrete from flexural tests", Constr. Build. Mater., 70, 243-253.   DOI
12 Swaddiwudhipong, S., Lu, H.R. and Wee, T.H. (2003), "Direct tension test", Cem. Concr. Res., 33, 2077-2084.   DOI
13 Wawrzynek, P.A. and Ingraffea, A.R. (1987), "Interactive finite element analysis of fracture processes: an integrated approach", Theor. Appl. Fract. Mech., 8(2), 137-150.   DOI
14 Silva, R.V., De Brito, J. and Dhir, R.K. (2015), "Tensile strength behaviour of recycled aggregate concrete", Constr. Build. Mater., 83, 108-118.   DOI
15 Tian, Y., Shi, S., Jia, K. and Hu, S. (2015), "Mechanical and dynamic properties of high strength concrete modified with lightweight aggregates presaturated polymer emulsion", Constr. Build. Mater., 93, 1151-1156.   DOI
16 Ibrahim, M.W., Hamzah, A.F., Jamaluddin, N., Ramadhansyah, P.J. and Fadzil, A.M. (2015), "Split tensile strength on self-compacting concrete containing coal bottom ash", Procedia-Social Behav. Sci., 195, 2280-2289.   DOI
17 Zain, M.F.M., Mahmud, H.B., Ilham, A. and Faizal, M. (2002), "Splitting tensile strength of high-performance concrete", Cement Concrete Res., 32, 1251-1257.   DOI
18 Zheng, W., Kwan, A.K.H. and Lee, P.K.K. (2001), "Direct tension test of concrete", Mater. J., 98(1), 63-71.
19 Zhou, F.P. (1988), Some aspects of tensile fracture behaviour and structural response of cementitious materials, Report TVBM 1008.