Browse > Article
http://dx.doi.org/10.12989/acc.2014.2.4.309

High performance fibre reinforced cement concrete slender structural walls  

Ganesan, N. (Department of Civil Engineering, National Institute of Technology Calicut, NIT Campus)
Indira, P.V. (Department of Civil Engineering, National Institute of Technology Calicut, NIT Campus)
Seena., P. (Department of Civil Engineering, National Institute of Technology Calicut, NIT Campus)
Publication Information
Advances in concrete construction / v.2, no.4, 2014 , pp. 309-324 More about this Journal
Abstract
In the design of reinforced concrete structural walls, in order to ensure adequate inelastic displacement behaviour and to sustain deformation demands imposed by strong ground motions, special reinforcement is considered while designing. However, these would lead to severe reinforcement congestion and difficulties during construction. Addition of randomly distributed discrete fibres in concrete improves the flexural behaviour of structural elements because of its enhanced tensile properties and this leads to reduction in congestion. This paper deals with effect of addition of steel fibres on the behavior of high performance fibre reinforced cement concrete (HPFRCC) slender structural walls with the different volume fractions of steel fibres. The specimens were subjected to quasi static lateral reverse cyclic loading until failure. The high performance concrete (HPC) used was obtained based on the guidelines given in ACI 211.1 which was further modified by prof.Aitcin (1998). The volume fraction of the fibres used in this study varied from 0 to 1% with an increment of 0.5%. The results were analysed critically and appraised. The study indicates that the addition of steel fibres in the HPC structural walls enhances the first crack load, strength, initial stiffness and energy dissipation capacity.
Keywords
fibres; high performance concrete; slender structural wall; stiffness;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 ACI 211.1:91 (reapproved2009), Standard Practice for Selecting Proportions for Normal, Heavyweight, and Mass Concrete, Farmington Hill,Michigan, American Concrete Institute.
2 ACI 318-08. (2008), Building Code Requirements for Reinforced Concrete, Farmington Hill, Michigan American Concrete Institute.
3 ACI 544.3R-08. (2008), Guide for Specifying, Proportioning, and Production of Fiber-Reinforced Concrete. Farmington Hills, Michigan, USA, American Concrete Institute, ACI Journal.
4 Aitcin, P.C. (1998), "High performance concrete", London: U.K. E & FN Spon.
5 American Society for Testing and Materials (ASTMs) C 1240-05, Standard Specification for Silica Fume used in Cementitios Mixtures.
6 American Society for Testing and Materials (ASTMs) C 618-03. (2003), Standard Test Method for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete.
7 Anshu, G. and Rangan,B.V. (1998), "High-strength concrete structural walls ", ACI Struct. J., 95(2), 194-203.
8 Athanasopoulou, A and Parra-Montesinos, G.J. (2013), "Experimental study on the seismic behaviour of high-performance fibre-reinforced concrete low-rise walls", ACI Struct. J., 110(5), 767-777.
9 Balaguru, P. and Ramakrishnan, V. (1988), "Properties of fiber reinforced concrete: workability, behavior under long-term loading, and air-void characteristics", ACI Mater. J., 85(3), 189-196.
10 Canbolat, B.A., Parra-Montesinos, G.J. and Wight, J.K. (2005), "Experimental study on seismic behavior of high- performance fiber-reinforced cement composite coupling beams", ACI Struct. J., 102(1), 159-166.
11 Daniel, L. and Loukili, A. (2002), "Behaviour of high-strength fibre-reinforced concrete beams under cyclic loading", ACI Struct. J., 99 (3), 248-256.
12 Dazio, A., Beyer, K. and Bachmann, H. (2009), "Quasi-static cyclic tests and plastic hinge analysis of RC structural walls", Eng. Struct., 31, 1556-1571.   DOI
13 Deng M., Liang, X. and Yang, K. (2008), "Experimental study on seismic behaviour of high performance concrete shear wall with new strategy of transverse confining stirrups", International Proceedings of 14th World Conference on Earthquake Engineering. composites: An alternative for seismic design of structures", ACI Structural Journal.,
14 Devi., G.N, Subramanian, K. and Santhakumar, A.R. (2011), "Experimental investigations on reinforced concrete lateral load resisting systems under lateral loads", Int. J. Experimental Techniques., Wiley-Blackwell Publications,59-73.
15 Farvashany, F.A., Foster, S.J. and Rangan, B.V. (2008), "Strength and deformation of high-strength concrete shearwalls", ACI Struct. J., 105 (1), 21-29.
16 Fintel, M. (1991), "Shear wall -An answer for seismic resistance", Concrete Int., 13(7), 48-53.
17 Ganesan, N, Indira, P.V. and Rajendra Prasad, S. (2010), "Strength and behavior of reinforced SCC wall panels in one-way action", Struct. Eng. Mech., 36(1), 1-18.   DOI
18 Ganesan, N., Indira, P.V. and Anjana santhakumar. (2013), "Engineering properties of steel fibre reinforced geopolymer concrete", Adv. Concrete Construct., 1(4), 305-318.   DOI
19 Ganesan, N., Indira, P.V, and Shyju, P.T. (2010), "Effect of ferrocement wrapping system on strength and behaviour of RC frames under reversed lateral cyclic loading", International Journal of Experimental Techniques.Wiley-Blackwell Publications,1-5
20 Ganesan, N., Indira, P.V. and Sabeena, M.V. (2013), "Behaviour of hybrid fibre reinforced concrete beam- column joints under reverse cyclic loads", Mater. Des., 54, 686-693.   DOI
21 Ganesan, N., Indira, P.V. and Ruby, A. (2007), "Steel fibre reinforced high performance concrete beamcolumn joints subjected to cyclic loading", ISET J. Earthq. Technol.., Technical Note, 44(3-4), 445-56.
22 Ganesan, N., Indira, P.V. and Barati, R. (2013), "Behavior of Self-Consolidating Rubberized Concrete Beam-Column Joints", ACI Mater. J., 110(6), 697-704.
23 Gebreyohaness, A., Clifton, C., Butterworth, J, and Ingham, J. (2014) "Experimental Assessment of Inadequately Detailed Reinforced Concrete Wall Components", ACI Struct. J., 111(2), 279-290.
24 IS 383:1970 (reaffirmed 2002), Specification for coarse and fine aggregates from natural sources for concrete, Bureau of Indian Standards, New Delhi.
25 IS12269:1987 (reaffirmed 2004), Specification for 53 grade ordinary portland cement, Bureau of Indian Standards, New Delhi.
26 Joaquim, A.O. Barros., Lucio, A.P. Lourenco., Fatemeh, S. and Mahsa, T. (2013), "Steel fibre reinforced concrete for elements failing in bending and in shear", Adv. Concrete Construct., 1(1), 1-27.   DOI
27 Jones, P.A., Austin, S.A. and Robins, P.J. (2008) "Predicting the flexural load-deflection response of steel fibre reinforced concrete from strain, crack-width, fibre pull-out and distribution data", Mater. Struct., 41(3),449-463.   DOI
28 Kranti, J. and Bupinder, S. (2013), "Steel fibres as minimum shear reinforcement in reinforced concrete beams", Mag. Concrete Res., 65(7), 430-440.   DOI
29 Lefas, I.D. and Kotsovos, M.D. (1990), "Strength and deformation characteristics of reinforced concrete walls.
30 Kuang, J.S and Ho, Y.B. (2008), "Seismic behaviour and ductility of squat reinforced concrete shear walls with nonseismic detailing", ACI Struct. J., 105(2), 225-231.
31 Lequesne, R.D., Parra-Montesinos, G.J. and Wight, J.K. (2009), "Test of a Coupled Wall with High Performance Fiber Reinforced Concrete Coupling Beams," Thomas T. C. Hsu Symposium: Shear and Torsion of Concrete Structures, SP-265, American Concrete Institute, Farmington Hills, MI.
32 Lim, D.H. and Oh, B.H. (1999), "Experimental and theoretical investigation on the shear of steel fibre reinforced concrete beams", Eng. Struct., 21, 937-944.   DOI   ScienceOn
33 Lowes, L.N., Lehman, D.L., Birely, A.C., Kuchma, D.A., Marley, K.P. and Hart, C.R. (2012), "Earthquake response of slender planar concrete walls with modern detailing", Eng. Struct., 43,31-47.   DOI
34 Massone, L. and Wallace, J.W. (2004), "Load deformation responses of slender reinforced concrete walls", ACI Struct. J., 101 (1), 103-113.
35 Naaman, A.E. and Reinhardt, H.W. (2003), "High performance fibre reinforced cement composites HPFRCC-4: International RILEM Workshop", Mater. Struct., 36,710-712.
36 Narayanan, R. and Darwish, I.Y.S. (1987), "Use of steel fibres as shear reinforcement", ACI Struct. J., 84(3), 216-27.
37 Parra-Montesinos, G.J. (2005), "High-performance fibre-reinforced cement, 102, 668-675.
38 Pilakoutas, K. and Elnashai, A.S. (1995), "Cyclic behavior of RC cantilever walls, Part I: Experimental results", ACI Struct. J., 92(3), 271-281.
39 Parra-Montesinos, G.J. and Chompreda, P. (2007), Deformation capacity and shear strength of fibrereinforced cement composite flexural members subjected to displacement reversals, J. Struct. Eng. ASCE, 133(3), 421-431.   DOI
40 Paulay, T. and Priestley, M.J.N. (1992), "Seismic design of reinforced concrete and masonry buildings", New York (USA), John Wiley & Sons.
41 Ramakrishnan, V., Coyle, W.V., Kulandaisamy, V. and Ernest, K.S. (1981), "Performance characteristics of fiber reinforced concretes with low fiber contents".
42 Rangan, B.V. (1997), "Rational design of structural walls", Concrete International.
43 Sittipunt, C. and Wood, S.L. (1995), "Influence of web reinforcement on the cyclic response of structural walls", ACI Struct. J., 92(6), 1-12.
44 Su, R.K.L. and Wong, S.M. (2007), "The seismic behaviour of slender reinforced concrete shear walls under high axial load ratio", Eng. Struct., 29, 1957-1965.   DOI
45 Tadepalli, P.R., Mo, Y.L., Dhonde, H.B, and Hsu, T.T.C. (2013), "Shear behaviour of prestressed steel fibre concrete box-beams", Mag. Concrete Res., 65(8), 462-474.   DOI
46 Tasnimi, A.A. (2000), "Strength and deformation of mid-rise shear walls under load reversal", Eng. Struct., 22(4), 311-322.   DOI
47 Tuladhar, R. and Benjamin, J.L. (2014), "Ductility of concrete slabs reinforced with low-ductility welded wire fabric and steel fibers", Struct. Eng. Mech., 49(4), 449-461.   DOI
48 Yun-do, Y., Chang-sik, C. and Li-hyung, L. (2004), "Earthquake performance of high-strength concrete structural walls with boundary elements", International Proceedings of 13th World Conference on Earthquake Engineering.
49 Uygunoglu, T. (2008), "Investigation of microstructure and flexural behaviour of steel-fiber reinforced concrete", Mater. Struct., 41(8),1441-1449.   DOI   ScienceOn