[KSCI] Korea Science Citation Index Service

http://dx.doi.org/10.12989/anr.2020.8.4.293

Investigation on hygro-thermal vibration of P-FG and symmetric S-FG nanobeam using integral Timoshenko beam theory

Matouk, Hakima (Laboratoire de Modelisation et Simulation Multi-echelle, Departement de Physique, Faculte des Sciences Exactes, Universite de Sidi Bel Abbes)
Bousahla, Abdelmoumen Anis (Laboratoire de Modelisation et Simulation Multi-echelle, Departement de Physique, Faculte des Sciences Exactes, Universite de Sidi Bel Abbes)
Heireche, Houari (Laboratoire de Modelisation et Simulation Multi-echelle, Departement de Physique, Faculte des Sciences Exactes, Universite de Sidi Bel Abbes)
Bourada, Fouad (Material and Hydrology Laboratory, Faculty of Technology, Civil Engineering Department, University of Sidi Bel Abbes)
Bedia, E.A. Adda (Department of Civil and Environmental Engineering, King Fahd University of Petroleum & Minerals)
Tounsi, Abdelouahed (Department of Civil and Environmental Engineering, King Fahd University of Petroleum & Minerals)
Mahmoud, S.R. (GRC Department, Jeddah Community College, King Abdulaziz University)
Tounsi, Abdeldjebbar (Laboratoire de Modelisation et Simulation Multi-echelle, Departement de Physique, Faculte des Sciences Exactes, Universite de Sidi Bel Abbes)
Benrahou, K.H. (Material and Hydrology Laboratory, Faculty of Technology, Civil Engineering Department, University of Sidi Bel Abbes)

Publication Information

Advances in nano research / v.8, no.4, 2020 , pp. 293-305 More about this Journal

Abstract

In the current research, the free vibrational behavior of the FG nano-beams integrated in the hygro-thermal environment and reposed on the elastic foundation is investigated using a novel integral Timoshenko beam theory (ITBT). The current model has only three variables unknown and requires the introduction of the shear correction factor because her uniformed variation of the shear stress through the thickness. The effective properties of the nano-beam vary according to power-law and symmetric sigmoid distributions. Three models of the hygro-thermal loading are employed. The effect of the small scale effect is considered by using the nonlocal theory of Eringen. The equations of motion of the present model are determined and resolved via Hamilton principle and Navier method, respectively. Several numerical results are presented thereafter to illustrate the accuracy and efficiency of the actual integral Timoshenko beam theory. The effects of the various parameters influencing the vibrational responses of the P-FG and SS-FG nano-beam are also examined and discussed in detail.

Keywords

FG nano-beam; vibrational behavior; Integral Timoshenko beam theory; hygro-thermal effect;

Citations & Related Records

Times Cited By KSCI : 50 (Citation Analysis)

Reference
Cited By KSCI

1	Akbas, S.D. (2019b), "Forced vibration analysis of functionally graded sandwich deep beams", Coupl. Syst. Mech., Int. J., 8(3), 259-271. https://doi.org/10.12989/csm.2019.8.3.259
2	Belmahi, S., Zidour, M. and Meradjah, M. (2019), "Small-scale effect on the forced vibration of a nano beam embedded an elastic medium using nonlocal elasticity theory", Adv. Aircr. Spacecr. Sci., Int. J, 6(1), 1-18. https://doi.org/10.12989/aas.2019.6.1.001
3	Hadji, L., Zouatnia, N. and Bernard, F. (2019), "An analytical solution for bending and free vibration responses of functionally graded beams with porosities: Effect of the micromechanical models", Struct. Eng. Mech., Int. J., 69(2), 231-241. https://doi.org/10.12989/sem.2019.69.2.231
4	Hajmohammad, M.H., Farrokhian, A. and Kolahchi, R. (2018), "Smart control and vibration of viscoelastic actuator-multiphase nanocomposite conical shells-sensor considering hygrothermal load based on layerwise theory", Aerosp. Sci. Technol., 78, 260270. https://doi.org/10.1016/j.ast.2018.04.030
5	Hamidi, A., Zidour, M., Bouakkaz, K. and Bensattalah, T. (2018), "Thermal and small-scale effects on vibration of embedded armchair single-walled carbon nanotubes", J. Nano Res., 51, 24-38. https://doi.org/10.4028/www.scrientific.net/JNanoR.51.24 DOI
6	Hosseini, H. and Kolahchi, R. (2018), "Seismic response of functionally graded-carbon nanotubes-reinforced submerged viscoelastic cylindrical shell in hygrothermal environment", Physica E: Low-dimens. Syst. Nanostruct., 102, 101-109. https://doi.org/10.1016/j.physe.2018.04.037 DOI
7	Hussain, M. and Naeem, M.N. (2019), "Rotating response on the vibrations of functionally graded zigzag and chiral single walled carbon nanotubes", Appl. Mathe. Model., 75, 506-520. https://doi.org/10.1016/j.apm.2019.05.039 DOI
8	Aria, A.I. and Friswell, M.I. (2019), "A nonlocal finite element model for buckling and vibration of functionally graded nanobeams", Compos. Part B., 166, 233-246. https://doi.org/10.1016/j.compositesb.2018.11.071 DOI
9	Sedighi, H.M. and Bozorgmehri, A. (2014), "Dynamic instability analysis of doubly clamped cylindrical nanowires in the presence of Casimir attraction and surface effects using modified couple stress theory", Acta Mechanica, 227(6), 1575-1591. https://doi.org/10.1007/s00707-016-1562-0 DOI
10	Sedighi, H.M. and Sheikhanzadeh, A. (2017), "Static and dynamic pull-in instability of nano-beams resting on elastic foundation based on the nonlocal elasticity theory", Chin. J. Mech. Eng., 30, 385-397. https://doi.org/10.1007/s10033-017-0079-3 DOI
11	Aria, A.I., Rabczuk, T. andFriswell, M.I. (2019), "A finite element model for the thermo-elastic analysis of functionally graded porous nanobeams", Eur. J. Mech.-A/Solids. https://doi.org/10.1016/j.euromechsol.2019.04.002
12	Avcar, M. (2019), "Free vibration of imperfect sigmoid and power law functionally graded beams", Steel Compos. Struct., Int. J., 30(6), 603-615. https://doi.org/10.12989/scs.2019.30.6.603
13	Ayat, H., Kellouche, Y., Ghrici, M. and Boukhatem, B. (2018), "Compressive strength prediction of limestone filler concrete using artificial neural networks", Adv. Computat. Des., Int. J., 3(3), 289-302. https://doi.org/10.12989/acd.2018.3.3.289
14	Barati, M.R. and Shahverdi, H. (2016), "A four-variable plate theory for thermal vibration of embedded FG nanoplates under non-uniform temperature distributions with different boundary conditions", Struct. Eng. Mech., Int. J., 60(4), 707-727. https://doi.org/10.12989/sem.2016.60.4.707 DOI
15	Barati, M.R. and Shahverdi, H. (2019), "Finite element forced vibration analysis of refined shear deformable nanocomposite graphene platelet-reinforced beams", J. Brazil. Soc. Mech. Sci. Eng., 42(1), 33. https://doi.org/10.1007/s40430-019-2118-8 DOI
16	Behera, S. and Kumari, P. (2018), "Free vibration of Levy-type rectangular laminated plates using efficient zig-zag theory", Adv. Computat. Des., Int. J., 3(3), 213-232. https://doi.org/10.12989/acd.2017.2.3.165
17	Ebrahimi, F. and Heidari, E. (2018), "Vibration characteristics of advanced nanoplates in humid-thermal environment incorporating surface elasticity effects via differential quadrature method", Struct. Eng. Mech., Int. J., 68(1), 131-157. http://dx.doi.org/10.12989/sem.2018.68.1.131
18	Ebrahimi, F. and Barati, M.R. (2016b), "A unified formulation for dynamic analysis of nonlocal heterogeneous nanobeams in hygro-thermal environment", Appl. Phys. A, 122, 792. https://doi.org/10.1007/s00339-016-0322-2 DOI
19	Ebrahimi, F. and Barati, M.R. (2017), "Buckling analysis of nonlocal strain gradient axially functionally graded nanobeams resting on variable elastic medium", Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 232(11), 2067-2078. https://doi.org/10.1177/0954406217713518 DOI
20	Ebrahimi, F. and Daman, M. (2017), "Dynamic characteristics of curved inhomogeneous nonlocal porous beams in thermal environment", Struct. Eng. Mech., Int. J., 64(1), 121-133. https://doi.org/10.12989/sem.2017.64.1.121
21	Ebrahimi, F. and Salari, E. (2015), "Effect of various thermal loadings on buckling and vibrational characteristics of nonlocal temperature dependent FG nanobeams", Mech. Adv. Mater. Struct., 23(12), 1379-1397. https://doi.org/10.1080/15376494.2015.1091524 DOI
22	Eltaher, M.A., El-Borgi, S. and Reddy, J.N. (2016), "Nonlinear analysis of size-dependent and material-dependent nonlocal CNTs", Compos. Struct., 153, 902-913. https://doi.org/10.1016/j.compstruct.2016.07.013 DOI
23	Shahadat, M.R.B., Alam, M.F., Mandal, M.N.A. and Ali, M.M. (2018), "Thermal transportation behaviour prediction of defective graphene sheet at various temperature: A Molecular Dynamics Study", Am. J. Nanomater., 6(1), 34-40. https://doi.org/10.12691/ajn-6-1-4
24	Kar, V.R., Mahapatra, T.R. and Panda, S.K. (2017), "Effect of different temperature load on thermal post buckling behaviour of functionally graded shallow curved shell panels", Compos. Struct., 160, 1236-1247. https://doi.org/10.1016/j.compstruct.2016.10.125 DOI
25	Katariya, P.V., Hirwani, C.K. and Panda, S.K. (2019), "Geometrically nonlinear deflection and stress analysis of skew sandwich shell panel using higher-order theory", Eng. Comput., 35(2), 467-485. https://doi.org/10.1007/s00366-018-0609-3 DOI
26	Khanik, H.B. (2018), "On vibrations of nanobeam systems", Int. J. Eng. Sci., 124, 85-103. https://doi.org/10.1016/j.ijengsci.2017.12.010 DOI
27	Selmi, A. (2019), "Effectiveness of SWNT in reducing the crack effect on the dynamic behavior of aluminium alloy", Adv. Nano Res., Int. J., 7(5), 365-377. https://doi.org/10.12989/anr.2019.7.5.365
28	Selmi, A. and Bisharat, A. (2018), "Free vibration of functionally graded SWNT reinforced aluminum alloy beam", J. Vibroeng., 20(5), 2151-2164. https://doi.org/10.21595/jve.2018.19445 DOI
29	Shahsavari, D., Karami, B. and Mansouri, S. (2018), "Shear buckling of single layer graphene sheets in hygrothermal environment resting on elastic foundation based on different nonlocal strain gradient theories", Eur. J. Mech. A, Solids, 67, 200-214. https://doi.org/10.1016/j.euromechsol.2017.09.004 DOI
30	Sharma, J.N., Chand, R. and Othman, M.I.A. (2009), "On the propagation of Lamb waves in viscothermoelastic plates under fluid loadings", Int. J. Eng. Sci., 47(3), 391-404. https://doi.org/10.1016/j.ijengsci.2008.10.008 DOI
31	Shodja, H.M., Ahmadpoor, F. and Tehranchi, A. (2012), "Calculation of the additional constants for fcc materials in second strain gradient elasticity: Behavior of a nano-size Bernoulli-Euler beam with surface effects", J. Appl. Mech. - Transact. ASME, 79, 021008:1-8. https://doi.org/10.1115/1.4005535
32	Lal, A., Jagtap, K.R. and Singh, B.N. (2017), "Thermomechanically induced finite element based nonlinear static response of elastically supported functionally graded plate with random system properties", Adv. Computat. Des., Int. J, 2(3), 165-194. https://doi.org/10.12989/acd.2017.2.3.165
33	Abdou, M.A., Othman, M.I.A., Tantawi, R.S. and Mansour, N.T. (2019), "Exact solutions of generalized thermoelastic medium with double porosity under L-S theory", Indian J. Phys. https://doi.org/10.1007/s12648-019-01505-8
34	Akbas, S.D. (2018), "Forced vibration analysis of cracked functionally graded microbeams", Adv. Nano Res., Int. J., 6(1), 39-55. https://doi.org/10.12989/anr.2018.6.1.039
35	Akbas, S.D. (2019a), "Hygro-thermal post-buckling analysis of a functionally graded beam", Coupl. Syst. Mech., Int. J., 8(5), 459-471. https://doi.org/10.12989/csm.2019.8.5.459
36	Belmahi, S., Zidour, M., Meradjah, M., Bensattalah, T. and Dihaj, A. (2018), "Analysis of boundary conditions effects on vibration of nanobeam in a polymeric matrix", Struct. Eng. Mech., Int. J., 67(5), 517-525. https://doi.org/10.12989/sem.2018.67.5.517
37	Eltaher, M.A., Agwa, M. and Kabeel, A. (2018a), "Vibration Analysis of Material Size-Dependent CNTs Using Energy Equivalent Model", J. Appl. Computat. Mech., 4(2), 75-86. https://doi.org/10.22055/JACM.2017.22579.1136
38	Eltaher, M.A., Fouda, N., El-midany, T. and Sadoun, A.M. (2018b), "Modified porosity model in analysis of functionally graded porous nanobeams", J. Brazil. Soc. Mech. Sci. Eng., 40, 141. https://doi.org/10.1007/s40430-018-1065-0 DOI
39	Kiani, Y. and Eslami, M.R. (2013), "An exact solution for thermal buckling of annular FGM plates on an elastic medium", Compos. Part B: Eng., 45(1), 101-110. https://doi.org/10.1016/j.compositesb.2012.09.034 DOI
40	Kolahchi, R., Safari, M. and Esmailpour, M. (2016), "Dynamic stability analysis of temperature-dependent functionally graded CNT-reinforced visco-plates resting on orthotropic elastomeric medium", Compos. Struct., 150, 255-265. https://doi.org/10.1016/j.compstruct.2016.05.023 DOI
41	Li, D.H., Guo, Q.R., Xu, D. and Yang, X. (2017), "Threedimensional micromechanical analysis models of fiber reinforced composite plates with damage", Comput. Struct., 191, 100-114. https://doi.org/10.1016/j.compstruc.2017.06.005 DOI
42	Bozyigit, B. and Yesilce, Y. (2016), "Dynamic stiffness approach and differential transformation for free vibration analysis of a moving Reddy-Bickford beam", Struct. Eng. Mech., Int. J., 58(5), 847-868. https://doi.org/10.12989/sem.2016.58.5.847 DOI
43	Bensaid, I., Bekhadda, A. and Kerboua, B. (2018), "Dynamic analysis of higher order shear-deformable nanobeams resting on elastic foundation based on nonlocal strain gradient theory", Adv. Nano Res., Int. J., 6(3), 279-298. https://doi.org/10.12989/anr.2018.6.3.279
44	Bensattalah, T., Zidour, M. and Hassaine Daouadji, T. (2018), "Analytical analysis for the forced vibration of CNT surrounding elastic medium including thermal effect using nonlocal Euler-Bernoulli theory", Adv. Mater. Res., Int. J., 7(3), 163-174. https://doi.org/10.12989/amr.2018.7.3.163
45	Bensattalah, T., Zidour, M., Hassaine Daouadji, T. and Bouakaz, K. (2019), "Theoretical analysis of chirality and scale effects on critical buckling load of zigzag triple walled carbon nanotubes under axial compression embedded in polymeric matrix", Struct. Eng. Mech., Int. J., 70(3), 269-277. https://doi.org/10.12989/sem.2019.70.3.269
46	Daouadji, T.H. (2017), "Analytical and numerical modeling of interfacial stresses in beams bonded with a thin plate", Adv. Computat. Des., Int. J., 2(1), 57-69. https://doi.org/10.12989/acd.2017.2.1.057
47	Ebrahimi, F. and Barati, M.R. (2016a), "Nonlocal strain gradient theory for damping vibration analysis of viscoelastic inhomogeneous nano-scale beams embedded in visco-Pasternak foundation", J. Vib. Control, 24(10), 2080-2095. https://doi.org/10.1177/1077546316678511 DOI
48	Eltaher, M.A., Almalki, T.A., Ahmed, K.I.E. and Almitani, K.H. (2019c), "Characterization and behaviors of single walled carbon nanotube by equivalent-continuum mechanics approach", Adv. Nano Res., Int. J., 7(1), 39-49. https://doi.org/10.12989/anr.2019.7.1.039 DOI
49	Eltaher, M.A., Omar, F.A., Abdalla, W.S. and Gad, E.H. (2019a), "Bending and vibrational behaviors of piezoelectric nonlocal nanobeam including surface elasticity", Waves Random Complex Media, 29(2), 264-280. https://doi.org/10.1080/17455030.2018.1429693 DOI
50	Eltaher, M.A., Almalki, T.A., Almitani, K.H. and Ahmed, K.I.E. (2019b), "Participation factor and vibration of carbon nanotube with vacancies", J. Nano Res., 57, 158-174. https://doi.org/10.4028/www.scientific.net/JNanoR.57.158 DOI
51	Eringen, A.C. (1972), "Nonlocal polar elastic continua", Int. J. Eng. Sci., 10, 1-16. https://doi.org/10.1016/0020-7225(72)90070-5 DOI
52	Eringen, A.C. (1983), "On differential equations of nonlocal elasticity and solutions of screw dislocation and surface waves", J. Appl. Phys., 54, 4703-4710. https://doi.org/10.1063/1.332803 DOI
53	Esmaeili, M. and Beni, Y.T. (2019), "Vibration and buckling analysis of functionally graded flexoelectric smart beam", J. Appl. Computat. Mech., 5(5), 900-917. https://doi.org/10.22055/JACM.2019.27857.1439
54	Othman, M.I.A., Abouelregal, A.E. and Said, S.M. (2019), "The effect of variable thermal conductivity on an infinite fiberreinforced thick plate under initial stress", J. Mech. Mater. Struct., 14(2), 277-293. https://doi.org/10.2140/jomms.2019.14.277 DOI
55	Mohamed, N., Eltaher, M.A., Mohamed, S.A. and Seddek, L.F. (2019), "Energy equivalent model in analysis of postbuckling of imperfect carbon nanotubes resting on nonlinear elastic foundation", Struct. Eng. Mech., Int. J., 70(6), 737-750. https://doi.org/10.12989/sem.2019.70.6.737
56	Na, K.S. and Kim, J.H. (2004), "Three-dimensional thermal buckling analysis of functionally graded materials", Compos. B Eng., 35(5), 429-437. https://doi.org/10.1016/j.compositesb.2003.11.013 DOI
57	Narwariya, M., Choudhury, A. and Sharma, A.K. (2018), "Harmonic analysis of moderately thick symmetric cross-ply laminated composite plate using FEM", Adv. Computat. Des., Int. J., 3(2), 113-132. https://doi.org/10.12989/acd.2018.3.2.113
58	Pascon, J.P. (2018), "Large deformation analysis of functionally graded visco-hyperelastic materials", Comput. Struct., 206, 90-108. https://doi.org/10.1016/j.compstruc.2018.06.001 DOI
59	Faleh, N.M., Ahmed, R.A. and Fenjan, R.M. (2018), "On vibrations of porous FG nanoshells", Int. J. Eng. Sci., 133, 1-14. https://doi.org/10.1016/j.ijengsci.2018.08.007 DOI
60	Forsat, M., Badnava, S., Mirjavadi, S.S., Barati, M.R. and Hamouda, A.M.S. (2020), "Small scale effects on transient vibrations of porous FG cylindrical nanoshells based on nonlocal strain gradient theory", Eur. Phys. J. Plus, 135(1), 81. https://doi.org/10.1140/epjp/s13360-019-00042-x DOI
61	Rajabi, J. and Mohammadimehr, M. (2019), "Bending analysis of a micro sandwich skew plate using extended Kantorovich method based on Eshelby-Mori-Tanaka approach", Comput. Concrete, Int. J., 23(5), 361-376. https://doi.org/10.12989/cac.2019.23.5.361
62	Rezaiee-Pajand, M., Masoodi, A.R. and Mokhtari, M. (2018), "Static analysis of functionally graded non-prismatic sandwich beams", Adv. Computat. Des., Int. J., 3(2), 165-190. https://doi.org/10.12989/acd.2018.3.2.165
63	Salamat, D. and Sedighi, H.M. (2017), "The effect of small scale on the vibrational behavior of single-walled carbon nanotubes with a moving nanoparticle", J. Appl. Computat. Mech., 3, 208-217. https://doi.org/10.22055/JACM.2017.12740
64	Romano, G., Barretta, R. and Diaco, M. (2017), "On nonlocal integral models for elastic nano-beams", Int. J. Mech. Sci., 131-132, 490-499. https://doi.org/10.1016/j.ijmecsci.2017.07.013 DOI
65	Safa, A., Hadji, L., Bourada, M. and Zouatnia, N. (2019), "Thermal vibration analysis of FGM beams using an efficient shear deformation beam theory", Earthq. Struct., Int. J., 17(3), 329-336. https://doi.org/10.12989/eas.2019.17.3.329
66	Sahouane, A., Hadji, L. and Bourada, M. (2019), "Numerical analysis for free vibration of functionally graded beams using an original HSDBT", Earthq. Struct., Int. J., 17(1), 31-37. https://doi.org/10.12989/eas.2019.17.1.031
67	Panjehpour, M., Loh, E.W.K. and Deepak, T.J. (2018), "Structural Insulated Panels: State-of-the-Art", Trends Civil Eng. Architect., 3(1), 336-340. https://doi.org/10.32474/TCEIA.2018.03.000151
68	Sedighi, H.M. (2014), "Size-dependent dynamic pull-in instability of vibrating electrically actuated microbeams based on the strain gradient elasticity theory", Acta Astronautica, 95(1), 111-123. https://doi.org/10.1016/j.actaastro.2013.10.020 DOI
69	Yuksela, Y.Z. and Akbas, S.D. (2018), "Free Vibration Analysis of a Cross-Ply Laminated Plate in Thermal Environment", Int. J. Eng. Appl. Sci. (IJEAS), 10(3), 176-189. http://dx.doi.org/10.24107/ijeas.456755
70	Sobhy, M. (2017), "Hygro-thermo-mechanical vibration and buckling of exponentially graded nanoplates resting on elastic foundations via nonlocal elasticity theory", Struct. Eng. Mech., Int. J., 63(3), 401-415. http://dx.doi.org/10.12989/sem.2017.63.3.401
71	Yuksela, Y.Z. and Akbas, S.D. (2019), "Buckling Analysis of a Fiber Reinforced Laminated Composite Plate with Porosity", J. Computat. Appl. Mech., 50(2), 375-380. https://doi.org/10.22059/jcamech.2019.291967.448

	(2020) Shock and vibration Dynamic Behavior of a Bidirectional Functionally Graded Sandwich Beam under Nonuniform Motion of a Moving Load / 2020 , 1
	(2020) Shock and vibration Impacts of PU Foam Stand-Off Layer on the Vibration Damping Performance of Stand-Off Free Layer Damping Cantilever Beams / 2020 , 1
12	(2020) Sn applied sciences A Levy solution for bending, buckling, and vibration of Mindlin micro plates with a modified couple stress theory / 2 (12) , 2169
4	(2020) Advances in materials research : AMR Predictions of the maximum plate end stresses of imperfect FRP strengthened RC beams: study and analysis / 9 (4) , 265
1	(2020) Advances in nano research Size dependent vibration of embedded functionally graded nanoplate in hygrothermal environment by Rayleigh-Ritz method / 10 (1) , 25
6	(2020) Coupled systems mechanics Effect of porosity distribution rate for bending analysis of imperfect FGM plates resting on Winkler-Pasternak foundations under various boundary conditions / 9 (6) , 575
	(2020) Shock and vibration New Finite Modeling of Free and Forced Vibration Responses of Piezoelectric FG Plates Resting on Elastic Foundations in Thermal Environments / 2021 , 1
	(2020) Shock and vibration Geometrical Influences on the Vibration of Layered Plates / 2021 , 1
	(2020) Advances in materials science and engineering Finite Element Modeling of Stress Behavior of FGM Nanoplates / 2021 , 1
	(2020) Mathematical problems in engineering Free Vibration Investigations of Rotating FG Beams Resting on Elastic Foundation with Initial Geometrical Imperfection in Thermal Environments / 2021 , 1
2	(2020) Advances in nano research Frequency characteristics and sensitivity analysis of a size-dependent laminated nanoshell / 10 (2) , 175
1	(2021) Advances in nano research On thermally induced instability of FG-CNTRC cylindrical panels / 10 (1) , 43
2	(2020) Steel & Composite structures : an international journal Interactions in a homogeneous isotropic modified couple stress thermoelastic solid with multi-dual-phase-lag heat transfer and two temperature / 38 (2) , 213
2	(2021) Structural engineering and mechanics : An international journal Numerical and experimental investigation for monitoring and prediction of performance in the soft actuator / 77 (2) , 167
3	(2020) Structural engineering and mechanics : An international journal Orthotropic magneto-thermoelastic solid with higher order dual-phase-lag model in frequency domain / 77 (3) , 315
2	(2020) Advances in nano research Geometrically nonlinear thermo-mechanical analysis of graphene-reinforced moving polymer nanoplates / 10 (2) , 151
1	(2020) Coupled systems mechanics Vibration analysis of porous FGM plate resting on elastic foundations: Effect of the distribution shape of porosity / 10 (1) , 61
3	(2020) Advances in nano research Elastic wave phenomenon of nanobeams including thickness stretching effect / 10 (3) , 271
1	(2020) Advances in nano research Temperature jump and concentration slip effects on bioconvection past a vertical porous plate in the existence of nanoparticles and gyrotactic microorganism with inclined MHD / 11 (1) , 27
3	(2020) Advances in nano research Nonlocal free vibration analysis of porous FG nanobeams using hyperbolic shear deformation beam theory / 10 (3) , 281
4	(2020) Structural engineering and mechanics : An international journal Free vibration of multi-cracked beams / 79 (4) , 441
1	(2020) Advances in nano research Mechanical analysis of bi-functionally graded sandwich nanobeams / 11 (1) , 55
2	(2020) Advances in nano research Vibration characteristics of microplates with GNPs-reinforced epoxy core bonded to piezoelectric-reinforced CNTs patches / 11 (2) , 115
	(2021) Case studies in thermal engineering A nonlocal quasi-3D theory for thermal free vibration analysis of functionally graded material nanoplates resting on elastic foundation / 26 , 101170
5	(2020) Journal of computational design and engineering Computational analysis of the nonlinear vibrational behavior of perforated plates with initial imperfection using NURBS-based isogeometric approach / 8 (5) , 1307
2	(2021) Advances in nano research Free vibration analysis of carbon nanotube RC nanobeams with variational approaches / 11 (2) , 157