Browse > Article
http://dx.doi.org/10.12989/csm.2021.10.6.545

Damage characterization in fiber reinforced polymer via Digital Volume Correlation  

Vrgoc, Ana (Laboratory of Experimental Mechanics, Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb)
Tomicevic, Zvonimir (Laboratory of Experimental Mechanics, Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb)
Smaniotto, Benjamin (Universite Paris-Saclay, ENS Paris-Saclay, CNRS, LMT-Laboratoire de Mecanique et Technologie)
Hild, Francois (Universite Paris-Saclay, ENS Paris-Saclay, CNRS, LMT-Laboratoire de Mecanique et Technologie)
Publication Information
Coupled systems mechanics / v.10, no.6, 2021 , pp. 545-560 More about this Journal
Abstract
An in situ experiment imaged via X-ray computed tomography was performed on a continuous glass fiber mat reinforced epoxy resin composite. The investigated dogbone specimen was subjected to uniaxial cyclic tension. The reconstructed scans (i.e., gray level volumes) were registered via Digital Volume Correlation. The calculated maximum principal strain fields and correlation residual maps exhibited strain localization areas within the material bulk, thus indicating damage inception and growth toward the specimen surface. Strained bands and areas of elevated correlation residuals were mainly concentrated in the narrowest gauge section of the investigated specimen, as well as on the specimen ligament edges. Gray level residuals were laid over the corresponding mesostructure to highlight and characterize damage development within the material bulk.
Keywords
correlation residuals; damage; digital volume correlation; fiber reinforced polymer; X-ray computed tomography;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Leclerc, H., Neggers, J., Mathieu, F., Hild, F and Roux, S. (2015), Correli 3.0., Agence Pour la Protection des Programmes, Paris, France, IDDN.FR.001.520008.000.S.P.2015.000.31500.
2 Tomicevic, Z., Hild, F. and Roux, S. (2013), "Mechanics-aided digital image correlation", J. Strain Anal., 48, 330-343. https://doi.org/10.1177/0309324713482457.   DOI
3 Nguyen, V.D., Wu, L. and Noels, L. (2019), "A micro-mechanical model of reinforced polymer failure with length scale effects and predictive capabilities. validation on carbon fiber reinforced high-crosslinked rtm6 epoxy resin", Mech. Mater., 133, 193-213. https://doi.org/10.1016/j.mechmat.2019.02.017.   DOI
4 Rethore, J., Tinnes, J.P., Roux, S., Buffiere, J.Y. and Hild, F. (2008), "Extended three-dimensional digital image correlation (X3D-DIC)", Comptes Rendus Mecanique, 336(8), 643-649. https://doi.org/10.1016/j.crme.2008.06.006.   DOI
5 Roux, S., Hild, F., Viot, P. and Bernard, D. (2008), "Three dimensional image correlation from X-Ray computed tomography of solid foam", Compos. Part A: Appl. Sci. Manuf., 39, 1253-1265. https://doi.org/10.1016/J.COMPOSITESA.2007.11.011.   DOI
6 Tomicevic, Z., Bouterf, A., Surma, R. and Hild, F. (2019), "Damage observation in glass fiber reinforced composites via µ-tomography", Mater Today: Proc., 12, 185-191. https://doi.org/10.1016/j.matpr.2019.03.093   DOI
7 Buljac, A., Shakoor, M., Neggers, J., Bernacki, M., Bouchard, P., Helfen, L., Morgeneyer, T. and Hild, F. (2016), "Numerical validation framework for micromechanical simulations based on synchrotron 3D imaging", Comput. Mech., 59, 419-441. https://doi.org/10.1007/s00466-016-1357-0.   DOI
8 Tomicevic, Z., Roux, S. and Hild, F. (2016), "Evaluation of fatigue crack network growth in cast iron for different biaxial loading paths via full-field measurements", Int. J. Fatig., 92, 281-303. https://doi.org/10.1016/j.ijfatigue.2016.07.013   DOI
9 Vrgoc, A., Tomicevic, Z., Smaniotto, B. and Hild, F. (2021), "Application of different imaging techniques for the characterization of damage in fiber reinforced polymer", Compos. Part A: Appl. Sci. Manuf., 150, 106576. https://doi.org/10.1016/j.compositesa.2021.106576.   DOI
10 Brunner, A. (2018), "Identification of damage mechanisms in fiber-reinforced polymer-matrix composites with acoustic emission and the challenge of assessing structural integrity and service-life", Constr. Build. Mater., 173, 629-637. https://doi.org/10.1016/j.conbuildmat.2018.04.084.   DOI
11 Mendoza, A., Neggers, J., Hild, F. and Roux, S. (2019), "Complete mechanical regularization applied to digital image and volume correlation", Comput. Meth. Appl. Mech. Eng., 355, 27-43. https://doi.org/10.1016/j.cma.2019.06.005.   DOI
12 Gigliotti, M., Pannier, Y., Gonzalez, R.A., Lafarie-Frenot, M. and Lomov, S. (2018), "X-ray micro-computed-tomography characterization of cracks induced by thermal cycling in non-crimp 3D orthogonal woven composite materials with porosity", Compos. Part A, 112, 100-110. https://doi.org/10.1016/j.compositesa.2018.05.020.   DOI
13 Abderezak, R., Daouadji, T.H. and Rabia, B. (2021), "Fiber reinforced polymer in civil engineering: Shear lag effect on damaged RC cantilever beams bonded by prestressed plate", Couple. Syst. Mech., 10(4), 299-316. https://doi.org/10.12989/csm.2021.10.4.299.   DOI
14 Bay, B. (2008), "Methods and applications of digital volume correlation", J. Strain Anal., 43, 745-760. https://doi.org/10.1243/03093247JSA436.   DOI
15 Buljac, A., Helfen, L., Hild, F. and Morgeneyer, T. (2018a), "Effect of void arrangement on ductile damage mechanisms in nodular graphite cast iron: In situ 3d measurements", Eng. Fract. Mech., 192, 242-261. https://doi.org/10.1016/j.engfracmech.2018.01.008.   DOI
16 Buljac, A., Jailin, C., Mendoza, A., Neggers, J., Taillandier-Thomas, T., Bouterf, A., Smaniotto, B., Hild, F. and Roux, S. (2018b), "Digital volume correlation: Review of progress and challenges", Exp. Mech., 58, 661-708. https://doi.org/10.1007/s11340-018-0390-7.   DOI
17 Kak, A. and Slaney, M. (1988), Principles of Computerized Tomographic Imaging, IEEE Press, New York, USA.
18 Leclerc, H., Perie, J., Roux, S. and Hild, F. (2011), "Voxel-scale digital volume correlation", Exp. Mech., 51, 479-490. https://doi.org/10.1007/S11340-010-9407-6.   DOI
19 Maire, E. and Withers, P. (2014), "Quantitative X-ray tomography", Int. Mater. Rev., 59, 1-43. https://doi.org/10.1179/1743280413Y.0000000023.   DOI
20 Mazars, V., Caty, O., Couegnat, G., Bouterf, A., Roux, S., Denneulin, S., Pailhes, J. and Vignoles, G. (2017), "Damage investigation and modeling of 3D woven ceramic matrix composites from X-ray tomography in-situ tensile tests", Acta Mater., 140, 130-139. https://doi.org/10.1016/10.1016/J.ACTAMAT.2017.08.034.   DOI
21 Naresh, K., Khan, K.A., Umer, R. and Cantwell, W. (2020), "The use of X-ray computed tomography for design and process modeling of aerospace composites: A review", Mater. Des., 190, 108553. https://doi.org/10.1016/j.matdes.2020.108553.   DOI