Browse > Article
http://dx.doi.org/10.12989/amr.2022.11.2.165

Evaluating the absorption loading technique to acrylic resin for drug delivery  

Al-Kaabi, Arshad F. (Department of Dental Technology, College of Health and Medical Technology, Middle Technical University)
Hamid, Mohammed A. (Department of Dental Technology, College of Health and Medical Technology, Middle Technical University)
Publication Information
Advances in materials Research / v.11, no.2, 2022 , pp. 165-170 More about this Journal
Abstract
Acrylic resin or polymethylmethacrylate (PMMA) is one of the most attractive materials to be used for dental appliances manufacturing. It has been introduced as a biomaterial during the last century. This study aims to evaluate the compounds absorption and release through acrylic resin to be used for drug delivery as well. The study specimens were 10 pieces of heat-cured clear acrylic resin with dimensions of 10 × 10 × 2 mm. The specimens were dipped in methylene blue solution at a powder-water ratio of 1:20 for 5 days. The samples were removed and dipped in 5 ml distilled water vials for 24 hours. Then the specimens were replaced into new 5 ml vials and the process lasted for 4 days. The extracted solutions were analyzed by the visible light spectroscopy for absorbance. The statistical results showed a gradual increase in stain release from day 1 to day 4 with a significant difference between day 1 and day 4 solutions. The study showed that PMMA resin is able to absorb and release some compounds constantly and the absorption drug-loading technique is applicable to this material.
Keywords
absorption; methylene blue; PMMA;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Al-Kaabi, A. and Hamid, M. (2020), "Active components delivery rate from acrylic resin maxillary surgical obturator: Part I", Adv. Mater. Res., Int. J., 9(2), 109-114. https://doi.org/10.12989/amr.2020.9.2.109   DOI
2 Aljorani, L.E. and Al-Kaabi, A.F.J. (2018), "Non-polar micro-coating on acrylic denture material for reducing the incidence of dental biofilm formation", Mustansiria Dent. J., 15(1), 77-82.
3 Budtz-Jorgensen, E. (1974), "The significance of Candida albicans in denture stomatitis", Eur. J. Oral Sci., 82, 151-190. https://doi.org/10.1111/j.1600-0722.1974.tb00378.x   DOI
4 Budtz-Jorgensen, E., Theilade, E. and Theilade, J. (1983), "Regional variations in viable bacterial and yeast counts of 1-week-old denture plaque in denture stomatitis", Eur. J. Oral Sci., 91, 288-295. https://doi.org/10.1111/j.1600-0722.1983.tb00818.x   DOI
5 Elmadani, A.A., Radovic, I., Tomic, N.Z., Petrovic, M., Stojanovic, D.B., Heinemann, R.J. and Radojevic, V. (2019), "Hybrid denture acrylic composites with nanozirconia and electrospun polystyrene fibers", PLoS One, 14(12), e0226528. https://doi.org/10.1371/journal.pone.0226528   DOI
6 Di Francesco, M., Primavera, R., Summa, M., Pannuzzo, M., Di Francesco, V., Di Mascolo, D., Bertorelli, R. and Decuzzi, P. (2020), "Engineering shape-defined PLGA microPlates for the sustained release of antiinflammatory molecules", J. Control. Release, 319, 201-212. https://doi.org/10.1016/j.jconrel.2019.12.039   DOI
7 Akpan, A. and Morgan, R. (2002), "Oral candidiasis", Postgrad. Med. J., 78(922), 455-459. http://dx.doi.org/10.1136/pmj.78.922.455   DOI
8 Maldonado, K., Xu, D., Wang, Y., Zhang, J.F., Hamdan, S., Wen, Z.T., Fidel, P.L., Noverr, M.C. and Xu, X. (2018), "Mechanical and physical properties of experimental antifungal denture base resins", Oral Health Dent. Stud., 1(1), p. 5.
9 Abd Kati, F. and Al-Kaabi, A.F.J. (2016), "Effect of oil paint addition on micro hardness of acrylic ocular prosthesis", Iraqi Dent. J., 38(2), 87-89. http://dx.doi.org/10.26477/idj.v38i2.83   DOI
10 Ahmed, A.R., Elkharraz, K., Irfan, M. and Bodmeier, R. (2012), "Reduction in burst release after coating poly(D,L-lactide-co-glycolide) (PLGA) microparticles with a drug-free PLGA layer", Pharm. Dev. Technol., 17(1), 66-72. https://doi.org/10.3109/10837450.2010.513989   DOI
11 Ariamanesh, H., Tamizi, N., Yazdinezhad, A., Salah, S., Motamed, N. and Amanloo, S. (2019), "The Effectiveness of Nigella Sativa Alcoholic Extract on the Inhibition of Candida Albicans Colonization and Formation of Plaque on Acrylic Denture Plates: an In Vitro Study", J. Dent., 20(3), 171-177. https://doi.org/10.30476/DENTJODS.2019.44911   DOI
12 Pollack, B., Buck, I.F. and Kalnius, J. (1964), "An oral syndrome complicating pschopharmacotherapy: study II", Am J Psychiatry, 121, 384-386. https://doi.org/10.1176/ajp.121.4.384   DOI
13 Kumar, A., Kumar, R., Vamshikiran, K., Deepthi, G., Kumar, N. and Akhilesh, M. (2019), "Evaluation of Impact Strength of Dental Acrylic Resins by Incorporation of TiO2 Nanoparticles Using Two Different Processing Techniques", J. Contemp. Dent. Pract., 20(10), 1184-1189.   DOI
14 Li, Z., Sun, J., Lan, J. and Qi, Q. (2016), "Effect of a denture base acrylic resin containing silver nanoparticles on Candida albicans adhesion and biofilm formation", Gerodontology, 33(2), 209-216. https://doi.org/10.1111/ger.12142   DOI
15 Namangkalakul, W., Benjavongkulchai, S., Pochana, T., Promchai, A., Satitviboon, W., Howattanapanich, S., Phuprasong, R., Ungvijanpunya, N., Supakanjanakanti, D., Chaitrakoonthong, T. and Muangsawat, S. (2020), "Activity of chitosan antifungal denture adhesive against common Candida species and Candida albicans adherence on denture base acrylic resin", J. Prosthet. Dent., 123(1), 181.e1. https://doi.org/10.1016/j.prosdent.2019.09.026   DOI
16 Nawasrah, A., AlNimr, A. and Ali, A.A. (2016), "Antifungal effect of henna against Candida albicans adhered to acrylic resin as a possible method for prevention of denture stomatitis", Int. J. Environ. Res. Public Health., 13(5), p. 520. https://doi.org/10.3390/ijerph13050520   DOI
17 Palaskar, J.N., Singh, S. and Mittal, S. (2019), "Evaluation and comparison of different polymerization techniques, curing cycles, and thicknesses of two denture base materials", Indian J. Dent. Res., 30(4), 583-589. https://doi.org/10.4103/ijdr.IJDR_170_16   DOI
18 Kurt, A., Erkose-Genc, G., Uzun, M., Sari, T. and Isik-Ozkol, G. (2018), "The Effect of Cleaning Solutions on a Denture Base Material: Elimination of Candida albicans and Alteration of Physical Properties", J. Prosthodont., 27(6), 577-583. https://doi.org/10.1111/jopr.12539   DOI
19 Procopio, A.L.F., Da Silva, R.A., Maciel, J.G., Sugio, C.Y.C., Soares, S., Urban, V.M. and Neppelenbroek, K.H. (2018), "Antimicrobial and cytotoxic effects of denture base acrylic resin impregnated with cleaning agents after long-term immersion", Toxicol. Vitro, 52, 8-13. https://doi.org/10.1016/j.tiv.2018.05.012   DOI
20 Darwazeh, A.M.G., Al-Refai, S. and Al-Mojaiwel, S. (2001), "Isolation of Candida species from the oral cavity and fingertips of complete denture wearers", J. Prosthet. Dent., 86(4), 420-423. https://doi.org/10.1067/mpr.2001.118020   DOI
21 Webb, B.C., Thomas, C.J., Willcox, M.D.P., Harty, D.W.S. and Knox, K.W. (1998), "Candida-associated denture stomatitis. Aetiology and management: a review. Part 2. Oral diseases caused by Candida species", Aust. Dent. J., 43(3), 160-166. https://doi.org/10.1111/j.1834-7819.1998.tb00157.x   DOI