Browse > Article
http://dx.doi.org/10.12989/amr.2021.10.2.077

Analysis and sizing of RC beams reinforced by external bonding of imperfect functionally graded plate  

Rabia, Benferhat (Laboratory of Geomatics and sustainable development, University of Tiaret)
Daouadji, Tahar Hassaine (Laboratory of Geomatics and sustainable development, University of Tiaret)
Abderezak, Rabahi (Laboratory of Geomatics and sustainable development, University of Tiaret)
Publication Information
Advances in materials Research / v.10, no.2, 2021 , pp. 77-98 More about this Journal
Abstract
An analytical method based on the compatibility of deformations and equilibrium of forces is investigated to predict the reinforcement plate area in concrete beams strengthened with Functionally Graded (FG) plates bonded to the tension face of the beams. The models are given for beams having rectangular and T-cross-sections. The effect of porosity that can happen inside FGM materials during their manufacture is also shown. New rules of the mixture that take into account different distribution rates of porosity in FG plates have been developed in this study. A parametric study is conducted to investigate the effect of several parameters such as the ultimate moment, plate stiffness, the distribution rate of the porosity, and compressive strength of the concrete. The results obtained show a significant gain in the reinforcement plate area of the RC beam strengthened with an FG plate relative to another reinforced with FRP plate, which makes it possible to reduce the interfacial stresses and prevents detachment of the reinforcing plate.
Keywords
RC beam; reinforcement; FGM plate; porosity;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Tounsi, A., Daouadji, T.H. and Benyoucef, S. (2008), "Interfacial stresses in FRP-plated RC beams: Effect of adherend shear deformations", Int. J. Adhes. Adhes., 29, 343-351. https://doi.org/10.1016/j.ijadhadh.2008.06.008   DOI
2 Rasheed, H.A. and Pervaiz, S. (2003), "Closed form equations for FRP flexural strengthening design of RC beams", Composites: Part B: Eng., 34, 539-550. https://doi.org/10.1016/S1359-8368(03)00047-7   DOI
3 Sharaky, I.A., Baena, M., Barris, C., Sallam, H.E.M. and Torres, L. (2018), "Effect of axial stiffness of NSM FRP reinforcement and concrete cover confinement on flexural behaviour of strengthened RC beams: Experimental and numerical study", Eng. Struct., 173, 987-1001. https://doi.org/10.1016/j.engstruct.2018.07.062.   DOI
4 Tahar, H.D., Boussad, A., Abderezak, R., Rabia, B., Fazilay, A. and Belkacem, A. (2019), "Flexural behaviour of steel beams reinforced by carbon fibre reinforced polymer: Experimental and numerical study", Struct. Eng. Mech., Int. J., 72(4), 409-419. https://doi.org/10.12989/sem.2019.72.4.409   DOI
5 Tahar, H.D., Abderezak, R. and Rabia, B. (2020), "Flexural performance of wooden beams strengthened by composite plate", Struct. Monitor. Maint., Int. J., 7(3), 233-259. http://doi.org/10.12989/smm.2020.7.3.233   DOI
6 Tayeb, B. and Daouadji, T.H. (2020), "Improved analytical solution for slip and interfacial stress in composite steel-concrete beam bonded with an adhesive", Adv. Mater. Res., Int. J., 9(2), 133-153. https://doi.org/10.12989/amr.2020.9.2.133   DOI
7 Thai, H.T. and Choi, D.H (2013), "Finite element formulation of various four unknown shear deformation theories for functionally graded plates", Finite Elem. Anal. Des., 75, 50-61. https://doi.org/10.1016/j.finel.2013.07.003   DOI
8 Wattanasakulponga, N. and Ungbhakornb, V. (2014), "Linear and non linear vibration analysis of elastically restrained ends FGM beams with porosities", Aero. Sci. Technol., 32(1), 111-120. https://doi.org/10.1016/j.ast.2013.12.002   DOI
9 Wattanasakulpong, N., Prusty, B.G., Kelly, D.W. and Hoffman, M. (2012), "Free vibration analysis of layered functionally graded beams with experimental validation", Mater. Des., 36, 182-190. https://doi.org/10.1016/j.matdes.2011.10.049   DOI
10 Zenkour, A.M. and Radwan, A.F. (2018), "Compressive study of functionally graded plates resting on Winkler-Pasternak foundations under various boundary conditions using hyperbolic shear deformation theory", Arch. Civil Mech. Eng., 18, 645-658. https://doi.org/10.1016/j.acme.2017.10.003   DOI
11 Zhu, J., Lai, Z., Yin, Z., Jeon, J. and Lee, S. (2001), "Fabrication of ZrO2-NiCr functionally graded material by powder metallurgy", Mater. Chem. Phys., 68(1-3), 130-135. https://doi.org/10.1016/S0254-0584(00)00355-2   DOI
12 Adim, B. and Daouadji, T.H. (2016), "Effects of thickness stretching in FGM plates using a quasi-3D higher order shear deformation theory", Adv. Mater. Res., Int. J., 5(4), 223-244. https://doi.org/10.12989/amr.2016.5.4.223   DOI
13 Daouadji, T.H., Hadji, L., Meziane, M.A.A. and Bekki, H. (2016b), "Elastic analysis effect of adhesive layer characteristics in steel beam strengthened with a fiber-reinforced polymer plates", Struct. Eng. Mech., Int. J., 59(1), 83-100. https://doi.org/10.12989/sem.2016.59.1.083   DOI
14 Daouadji, T.H. (2017), "Analytical and numerical modeling of interfacial stresses in beams bonded with a thin plate", Adv. Computat. Des., Int. J., 2(1), 57-69. https://doi.org/10.12989/acd.2017.2.1.057   DOI
15 Daouadji, H.T., Benyoucef, S., Tounsi, A., Benrahou, K.H. and Bedia, A.E. (2008), "Interfacial stress concentrations in FRP-damaged RC hybrid beams", Compos. Interf., 15(4), 425-440. https://doi.org/10.1163/156855408784514702   DOI
16 Daouadji, T.H., Rabahi, A., Abbes, B. and Adim, B. (2016a), "Theoretical and finite element studies of interfacial stresses in reinforced concrete beams strengthened by externally FRP laminates plate", J. Adhes. Sci. Technol., 30(12), 1253-1280. https://doi.org/10.1080/01694243.2016.1140703   DOI
17 Gao, P., Gu, X. and Mosallam, A.S. (2016), "Flexural behavior of preloaded reinforced concrete beams strengthened by prestressed CFRP laminates", Compos. Struct., 157(1), 33-50. https://doi.org/10.1016/j.compstruct.2016.08.013   DOI
18 Hadj, B., Rabia, B. and Daouadji, T.H. (2019), "Influence of the distribution shape of porosity on the bending FGM new plate model resting on elastic foundations", Struct. Eng. Mech., Int. J., 72(1), 823-832. https://doi.org/10.12989/sem.2019.72.1.061   DOI
19 Kim, M., Pokhrel, A., Jung, D., Kim, S. and Park, C. (2017), "The Strengthening Effect of CFRP for Reinforced Concrete Beam", Procedia Eng., 210, 141-147. https://doi.org/10.1016/j.proeng.2017.11.059   DOI
20 Adim, B., Daouadji, T.H. and Abbes, B. (2016a), "Buckling analysis of anti-symmetric cross-ply laminated composite plates under different boundary conditions", Int. Appl. Mech., 52(6), 126-141. https://doi.org/10.1007/s10778-016-0787-x   DOI
21 Belkacem, A., Tahar, H.D., Abderrezak, R., Amine, B.M., Mohamed, Z. and Boussad, A. (2018), "Mechanical buckling analysis of hybrid laminated composite plates under different boundary conditions", Struct. Eng. Mech., Int. J., 66(6), 761-769. https://doi.org/10.12989/sem.2018.66.6.761   DOI
22 Murthy, A.R., Aravindan, M. and Ganesh, P. (2018), "Prediction of flexural behaviour of RC beams strengthened with ultra high performance fiber reinforced concrete", Struct. Eng. Mech., Int. J., 65(3), 315-325. https://doi.org/10.12989/sem.2018.65.3.315   DOI
23 Oller, E., Pujol, M. and Mari, A. (2019), "Contribution of externally bonded FRP shear reinforcement to the shear strength of RC beams", Compos. Part B, 164(1), 235-248. https://doi.org/10.1016/j.compositesb.2018.11.065.   DOI
24 Chedad, A., Daouadji, T.H., Abderezak, R., Adim, B., Abbes, B., Rabia, B. and Abbes, F. (2018), "A high-order closed-form solution for interfacial stresses in externally sandwich FGM plated RC beams", Adv. Mater. Res., Int. J., 6(4), 317-328. https://doi.org/10.12989/amr.2017.6.4.317   DOI
25 Picard, A., Massicotte, B. and Boucher, E. (1995), "Strengthening of reinforced concrete beams with composite materials: theoretical study", Compos. Struct., 33, 63-75. https://doi.org/10.1016/0263-8223(95)00106-9   DOI
26 Pradhan, K.K. and Chakraverty, S. (2015), "Free vibration of functionally graded thin elliptic plates with various edge support", Struct. Eng. Mech., Int. J., 53(2), 337-354. https://doi.org/10.12989/sem.2015.53.2.337   DOI
27 Rabahi, A., Daouadji, T.H., Abbes, B. and Adim, B. (2016), "Analytical and numerical solution of the interfacial stress in reinforced-concrete beams reinforced with bonded prestressed composite plate", J. Reinf. Plast. Compos., 35(3), 258-272. https://doi.org/10.1177/0731684415613633   DOI
28 Rabia, B., Abderezak, R., Daouadji, T.H., Abbes, B., Belkacem, A. and Abbes, F. (2018), "Analytical analysis of the interfacial shear stress in RC beams strengthened with prestressed exponentially-varying properties plate", Adv. Mater. Res., Int. J., 7(1), 29-44. https://doi.org/10.12989/amr.2018.7.1.029   DOI
29 Hamrat, M., Bouziadi, F., Boulekbache, B., Daouadji, T.H., Chergui, S., Labed, A. and Amziane, S. (2020), "Experimental and numerical investigation on the deflection behavior of pre-cracked and repaired reinforced concrete beams with fiber-reinforced polymer", Constr. Build. Mater., 249, 118745. http://dx.doi.org/10.1016/j.conbuildmat.2020.118745   DOI
30 Abdelhak, Z., Hadji, L., Daouadji, T.H. and Adda Bedia, E.A. (2016), "Thermal buckling response of functionally graded sandwich plates with clamped boundary conditions", Smart Struct. Syst., Int. J., 18(2), 267-291. https://doi.org/10.12989/sss.2016.18.2.267   DOI
31 Abderezak, R., Daouadji, T.H., Rabia, B. and Belkacem, A. (2018b), "Nonlinear analysis of damaged RC beams strengthened with glass fiber reinforced polymer plate under symmetric loads", Earthq. Struct., Int. J., 15(2), 113-122. https://doi.org/10.12989/eas.2018.15.2.113   DOI
32 Abderezak, R., Daouadji, T.H. and Rabia, B. (2020), "Analysis of interfacial stresses of the reinforced concrete foundation beams repairing with composite materials plate", Coupl. Syst. Mech., Int. J., 9(5), 473-498. http://dx.doi.org/10.12989/csm.2020.9.5.473   DOI
33 Ameur, M., Tounsi, A., Benyoucef, S., Bouiadjra, M.B. and Bedia, E.A. (2009), "Stress analysis of steel beams strengthened with a bonded hygrothermal aged composite plate", Int. J. Mech. Mater. Des., 5, 143-156. https://doi.org/10.1007/s10999-008-9090-2   DOI
34 Abderezak, R., Daouadji, T.H., Abbes, B., Rabia, B., Belkacem, A. and Abbes, F. (2018b), "Elastic analysis of interfacial stress concentrations in CFRP-RC hybrid beams: Effect of creep and shrinkage", Adv. Mater. Res., Int. J., 6(3), 257-278. https://doi.org/10.12989/amr.2017.6.3.257   DOI
35 Abderezak, R., Rabia, B., Daouadji, T.H., Abbes, B., Belkacem, A. and Abbes, F. (2019), "Elastic analysis of interfacial stresses in prestressed PFGM-RC hybrid beams", Adv. Mater. Res., Int. J., 7(2), 83-103. https://doi.org/10.12989/amr.2018.7.2.083   DOI
36 Adim, B., Daouadji, T.H., Rabia, B. and Hadji, L. (2016b), "An efficient and simple higher order shear deformation theory for bending analysis of composite plates under various boundary conditions", Earthq. Struct., Int. J., 11(1), 63-82. https://doi.org/10.12989/eas.2016.11.1.063   DOI
37 Guo, R., Hu, W., Li, M. and Wang, B. (2020), "Study on the flexural strengthening effect of RC beams reinforced by FRP grid with PCM shotcrete", Compos. Struct., 239(1), 112000. https://doi.org/10.1016/j.compstruct.2020.112000   DOI
38 Hadji, L., Daouadji, T.H. and Bedia, E.A. (2015), "A refined exponential shear deformation theory for free vibration of FGM beam with porosities", Geomech. Eng., Int. J., 9(3), 361-372. https://doi.org/10.12989/gae.2015.9.3.361   DOI
39 Rabia, B., Tahar, H.D. and Abderezak, R. (2020a), "Thermo-mechanical behavior of porous FG plate resting on the Winkler-Pasternak foundation", Coupl. Syst. Mech., Int. J., 9(6), 499-519. http://doi.org/10.12989/csm.2020.9.6.499   DOI
40 Rabia, B., Daouadji, T.H. and Abderezak, R. (2019), "Effect of distribution shape of the porosity on the interfacial stresses of the FGM beam strengthened with FRP plate", Earthq. Struct., Int. J., 16(5), 601-609. https://doi.org/10.12989/eas.2019.16.5.601   DOI
41 Rabia, B., Daouadji, T.H. and Abderezak, R. (2020b), "Predictions of the maximum plate end stresses of imperfect FRP strengthened RC beams: study and analysis", Adv. Mater. Res., Int. J., 9(4), 265-287. http://doi.org/10.12989/amr.2020.9.4.265   DOI
42 Rabahi, A., Daouadji, T.H., Abbes, B. and Adim, B. (2016), "Analytical and numerical solution of the interfacial stress in reinforced-concrete beams reinforced with bonded prestressed composite plate", J. Reinf. Plast. Compos., 35(3), 258-272. https://doi.org/10.1177/0731684415613633   DOI
43 Ashour, A.F. (2002), "Size of FRP laminates to strengthen reinforced concrete sections in flexure", Struct. Build., 152(3), 225-233. https://doi.org/10.1680/stbu.2002.152.3.225   DOI
44 Adim, B., Daouadji, T.H., Abbes, B. and Rabahi, A. (2016c), "Buckling and free vibration analysis of laminated composite plates using an efficient and simple higher order shear deformation theory", Mech. Ind., 17, 512. https://doi.org/10.1051/meca/2015112   DOI
45 Aicha, K., Rabia, B., Daouadji, T.H. and Bouzidene, A. (2020), "Effect of porosity distribution rate for bending analysis of imperfect FGM plates resting on Winkler-Pasternak foundations under various boundary conditions", Coupl. Syst. Mech., Int. J., 9(6), 575-597. http://doi.org/10.12989/csm.2020.9.6.575   DOI
46 Al-Amery, R. and Al-Mahaidi, R. (2006), "Coupled flexural-shear retrofitting of RC beams using CFRP straps", Compos. Struct., 75, 457-464. https://doi.org/10.1016/j.compstruct.2006.04.037   DOI
47 Ashour, A.F. (2006), "Flexural and shear capacities of concrete beams reinforced with GFRP bars", Constr. Build. Mater., 20, 1005-1015. https://doi.org/10.1016/j.conbuildmat.2005.06.023   DOI
48 Benferhat, R., Daouadji, T.H., Mansour, M.S. and Hadji, L. (2016a), "Effect of porosity on the bending and free vibration response of functionally graded plates resting on Winkler-Pasternak foundations", Earthq. Struct., Int. J., 10(6), 1429-1449. https://doi.org/10.12989/eas.2016.10.6.1429   DOI
49 Fareed, S. (2014), "Behaviour of reinforced concrete beams strengthened by CFRP wraps with and without end anchorages", Procedia Eng., 77, 123-130. https://doi.org/10.1016/j.proeng.2014.07.011   DOI
50 Benferhat, R., Daouadji, T.H. and Adim, B. (2016b), "A novel higher order shear deformation theory based on the neutral surface concept of FGM plate under transverse load", Adv. Mater. Res., Int. J., 5(2), 107-120. https://doi.org/10.12989/amr.2016.5.2.107   DOI
51 Bensattalah, T., Daouadji, T.H. and Zidour, M. (2020), "Influences the Shape of the Floor on the Behavior of Buildings Under Seismic Effect", Proceedings of the 4th International Symposium on Materials and Sustainable Development, Volume 1 - Nano Technology and Advanced Materials, pp. 26-42. https://doi.org/10.1007/978-3-030-43268-3_3   DOI
52 Benhenni, M.A., Daouadji, T.H., Abbes, B., Adim, B., Li, Y. and Abbes, F. (2018), "Dynamic analysis for anti-symmetric cross-ply and angle-ply laminates for simply supported thick hybrid rectangular plates", Adv. Mater. Res., Int. J., 7(2), 83-103. https://doi.org/10.12989/amr.2018.7.2.119   DOI
53 Tlidji, Y., Benferhat, R. and Tahar, H.D. (2021), "Study and analysis of the free vibration for FGM microbeam containing various distribution shape of porosity", Struct. Eng. Mech., Int. J., 77(2), 217-229. http://doi.org/10.12989/sem.2021.77.2.217   DOI
54 Rao, G.A. and Injaganeri, S.S. (2011), "Evaluation of size dependent design shear strength of reinforced concrete beams without web reinforcement", Ind. Acad. Sci., 36(3), 393-410. https://doi.org/10.1007/s12046-011-0029-1   DOI
55 Benferhat, R., Daouadji, T.H. and Mansour, M.S. (2016c), "Free vibration analysis of FG plates resting on the elastic foundation and based on the neutral surface concept using higher order shear deformation theory", Comptes Rendus Mecanique, 344(9), 631-641. https://doi.org/10.1016/j.crme.2016.03.002   DOI
56 Benhenni, M.A., Daouadji, T.H., Abbes, B., Abbes, F., Li, Y. and Adim, B. (2019), "Numerical analysis for free vibration of hybrid laminated composite plates for different boundary conditions", Struct. Eng. Mech., Int. J., 70(5), 535-549. https://doi.org/10.12989/sem.2019.70.5.535   DOI
57 Bensattalah, T., Zidour, M. and Daouadji, T.H. (2018), "Analytical analysis for the forced vibration of CNT surrounding elastic medium including thermal effect using nonlocal Euler-Bernoulli theory", Adv. Mater. Res., Int. J., 7(3), 163-174. https://doi.org/10.12989/amr.2018.7.3.163   DOI
58 Chergui, S., Daouadji, T.H., Hamrat, M., Boulekbache, B., Bougara, A., Abbes, B. and Amziane, S. (2019), "Interfacial stresses in damaged RC beams strengthened by externally bonded prestressed GFRP laminate plate: Analytical and numerical study", Adv. Mater. Res., Int. J., 8(3), 197-217. https://doi.org/10.12989/amr.2019.8.3.197   DOI
59 Daouadji, T.H. (2013), "Analytical analysis of the interfacial stress in damaged reinforced concrete beams strengthened by bonded composite plates", Strength Mater., 45(5), 587-597. https://doi.org/10.1007/s11223-013-9496-4   DOI