Browse > Article
http://dx.doi.org/10.12989/amr.2021.10.1.067

Effect of physical properties of samples on the mechanical characteristics of high-density polyethylene (HDPE)  

Kalmagambetova, Aizada (Department of Building Materials and Technologies, Karaganda Technical University)
Bogoyavlenskaya, Tatyana (Department of Building Materials and Technologies, Karaganda Technical University)
Publication Information
Advances in materials Research / v.10, no.1, 2021 , pp. 67-76 More about this Journal
Abstract
This study aimed an experimental data about the effect of physical properties of samples on the mechanical characteristics of high-density polyethylene (HDPE) used for the manufacture of preinsulated pipes for heating networks. The main waterproofing insulation material in the construction of preinsulated pipelines for heating networks is polyethylene. Outer outer casing of preinsulated pipes made of high density polyethylene (HDPE) are used as a waterproofing insulation of polyurethane foam of steel pipes manufactured in the factory. The sufficient resistances to cracking and mechanical stress, resistance to ultraviolet radiation, high density, high strength, low aging are main properties of HDPE. The study of HDPE of different manufacturers is relevant because of the aging of preinsulated pipelines with HDPE outer casing. In this study are tested physical characteristics of HDPE as a melt flow rate, density at 23℃, water content of PE80, PE100 pipe polyethylene of different world manufacturers. The best samples of HDPE and the effects of various aging factors on the properties of polyethylene are presented.
Keywords
building materials; polyethylene; HDPE; heating networks; material properties;
Citations & Related Records
연도 인용수 순위
  • Reference
1 DIN EN 253-2013 (2013), District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene.
2 Kimelblat, V.I., Volkov, I.V. and Zhukov, A.V. (2015), "Technological features of butt-welding of pipes of different grades of polyethylene", Territory Neftegaz, 4, 84-89. [In Russian]
3 Nezbedova, E., Pinter, G., Frank, A., Hutar, P., Poduska, J. and Hodan, J. (2017), "Accelerated Tests for Lifetime Prediction of PE-HD Pipe Grades", Macromolecular Symposia, 373(1), 1600096. http://doi.org/10.1002/masy.201600096.   DOI
4 DIN EN 448-2009 (2009), District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene.
5 Doyle, L., Weidlich, I. and Illguth, M. (2019), "Anisotropy in Polyurethane Pre-Insulated Pipes", Polym., 11(12), p. 2074. http://doi.org/10.3390/polym11122074   DOI
6 EN 12118-2013 (2013), Plastics piping systems - determination of moisture content in thermoplastics by coulometry.
7 EN DIN 8075 (2013), Polyethylene (PE) pipes - PE 80, PE 100 - General quality requirements, testing.
8 Kalmagambetova, A.Sh. and Bogoyavlenskaya, T.A. (2020), "The influence of adhesion of different materials on the properties of preinsulated pipes", Euroheat and Power (English Edition), 2020(3), pp. 32-37.
9 He, X., Zha, X., Zhu, X., Qi, X. and Liu, B. (2018), "Effect of short chain branches distribution on fracture behavior of polyethylene pipe resins", Polym. Testing, 68, 219-228. http://doi.org/10.1016/J.POLYMERTESTING.2018.04.017   DOI
10 Huang, X., Alva, G., Liu, L. and Fang, G. (2017), "Microstructure and thermal properties of cetyl alcohol/high density polyethylene composite phase change materials with carbon fiber as shape-stabilized thermal storage materials", Appl. Energy, 200, 19-27. http://doi.org/10.1016/J.APENERGY.2017.05.074   DOI
11 Kayfeci, M. (2014), "Determination of energy saving and optimum insulation thicknesses of the heating piping systems for different insulation materials", Energy Build., 69, 278-284. http://doi.org/10.1016/J.ENBUILD.2013.11.017   DOI
12 Turski, M. and Sekret, R. (2018), "Buildings and a district heating network as thermal energy storages in the district heating system", Energy Build., 179, 49-56. http://doi.org/10.1016/J.ENBUILD.2018.09.015   DOI
13 Volkov, I.V., Bitt, V.V., Kalugina, E.V., Kryuchkov, A.N. and Kimelblat, V.I. (2014), "Rheology of polyethylenes and pipe extrusion", Polym. Tubes, 4(46), 46-50. [In Russian]
14 Soltaninezhad, S., Goharrizi, A.S. and Salavati, H. (2020), "Investigation the fracture behavior of high-density polyethylene PE80 weakened by inclined U-notch with end hole", Struct. Eng. Mech., Int. J., 74(5), 601-609. http://doi.org/10.12989/sem.2020.74.5.601   DOI
15 Technical Datasheet Formosa Plastic Corporation (2010), Taisox 8001 BL-Black. Jan. 2 2010.
16 Torres-Huerta, A.M., Dominguez-Crespo, M.A., Palma-Ramirez, D., Flores-Vela, A.I., Castellanos-Alvarez, E. and Del Angel-Lopez, D. (2019), "Preparation and degradation study of HDPE/PLA polymer blends for packaging applications", Rev. Mex. Ing. Quimica, 18, 251-271.   DOI
17 Wang, H., Meng, H. and Zhu, T. (2018), "New model for onsite heat loss state estimation of general district heating network with hourly measurements", Energy Convers. Manage., 157, 71-85. http://doi.org/10.1016/J.ENCONMAN.2017.11.062   DOI
18 Zanasi, T., Fabbri, E. and Pilati, F. (2009), "Qualification of pipe-grade HDPEs: Part I, development of a suitable accelerated ageing method", Polym. Testing, 28, 96-102. http://doi.org/10.1016/J.POLYMERTESTING.2008.11.006   DOI
19 Prishchepa, D., Ivanov, A., Ioffe, A., Katsevman, M. and Kalugina, E. (2014), "Lightfastness of polyethylene pipe grades", Polym. Tubes, 2(44), 56-60. [In Russian]
20 Sadr-Al-Sadati, S.A. and Ghazizadeh, M.J. (2019), "The experimental and numerical study of water leakage from High-Density Polyethylene pipes at elevated temperatures", Polym. Testing, 74, 274-280. http://doi.org/10.1016/J.POLYMERTESTING.2019.01.014   DOI
21 ASTM D1238 (2013), Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer, Copyright by ASTM Int'l (all rights reserved); Fri Feb 14 10:09:04 EST 2014.
22 ASTM D1505 (2018), Standard Test Method for Density of Plastics by the Density-Gradient Technique, 1 Apr. 2018
23 Bazhanova, M.E. and Erofeev, V.T. (2012), "The resistance of pipeline materials under the influence of soil microorganisms", Bulletin of BSTU. V.G. Shukhov, 1, 31-33. [In Russian]
24 Chopra, K., Tyagi, V.V., Pandey, A.K. and Sari, A. (2018), "Global advancement on experimental and thermal analysis of evacuated tube collector with and without heat pipe systems and possible applications", Appl. Energy, 228, 351-389. http://doi.org/10.1016/J.APENERGY.2018.06.067   DOI
25 anielewicz, J., Sniechowska, B., Sayegh, M.A., Fidorow, N. and Jouhara, H. (2016), "Three-dimensional numerical model of heat losses from district heating network pre-insulated pipes buried in the ground", Energy, 108, 172-184. http://doi.org/10.1016/J.ENERGY.2015.07.012   DOI
26 Deveci, S. and Fang, D. (2017), "Correlation of molecular parameters, strain hardening modulus and cyclic fatigue test performances of polyethylene materials for pressure pipe applications", Polym. Testing, 62, 246-253. http://doi.org/10.1016/J.POLYMERTESTING.2017.07.007   DOI