Browse > Article
http://dx.doi.org/10.12989/amr.2020.9.2.115

Limit speeds and stresses in power law functionally graded rotating disks  

Madan, Royal (Department of Mechanical Engineering, National Institute of Technology Raipur)
Saha, Kashinath (Department of Mechanical Engineering, Jadavpur University)
Bhowmick, Shubhankar (Department of Mechanical Engineering, National Institute of Technology Raipur)
Publication Information
Advances in materials Research / v.9, no.2, 2020 , pp. 115-131 More about this Journal
Abstract
Limit elastic speed analysis of Al/SiC-based functionally graded annular disk of uniform thickness has been carried out for two cases, namely: metal-rich and ceramic rich. In the present study, the unknown field variable for radial displacement is solved using variational method wherein the solution was obtained by Galerkin's error minimization principle. One of the objectives was to identify the variation of induced stress in a functionally graded disk of uniform thickness at limit elastic speed using modified rule of mixture by comparing the induced von-Mises stress with the yield stress along the disk radius, thereby locating the yield initiation. Furthermore, limit elastic speed has been reported for a combination of varying grading index (n) and aspect ratios (a/b).Results indicate, limit elastic speed increases with an increase in grading indices. In case of an increase in aspect ratio, limit elastic speed increases up to a critical value beyond which it recedes. Also, the objective was to look at the variation of yield stress corresponding to volume fraction variation within the disk which later helps in material tailoring. The study reveals the qualitative variation of yield stress for FG disk with volume fraction, resulting in the possibility of material tailoring from the processing standpoint, in practice.
Keywords
yield stress calculation; modified rule of mixture (MROM); limit analysis; variational method; FG disk;
Citations & Related Records
Times Cited By KSCI : 6  (Citation Analysis)
연도 인용수 순위
1 Abderezak, R., Rabia, B., Daouadji, T.H., Abbes, B., Belkacem, A. and Abbes, F. (2018), "Elastic analysis of interfacial stresses in prestressed PFGM-RC hybrid beams", Adv. Mater. Res., Int. J., 7(2), 83-103. https://doi.org/10.12989/amr.2018.7.2.83
2 Bayat, M., Saleem, M., Sahari, B.B., Hamouda, A.M.S. and Mahdi, E. (2008), "Analysis of functionally graded rotating disks with variable thickness", Mech. Res. Commun., 35(5), 283-309. https://doi.org/10.1016/j.mechrescom.2008.02.007   DOI
3 Bhattacharyya, M., Kapuria, S. and Kumar, A.N. (2007), "On the Stress to Strain Transfer Ratio and Elastic Deflection Behavior for Al/SiC Functionally Graded Material", Mech. Adv. Mater. Struct., 14(4), 295-302. https://doi.org/10.1080/15376490600817917   DOI
4 Bhowmick, S., Misra, D. and Nath Saha, K. (2008), "Approximate solution of limit angular speed for externally loaded rotating solid disk", Int. J. Mech. Sci., 50(2), 163-174. https://doi.org/10.1016/j.ijmecsci.2007.07.004   DOI
5 Bhowmick, S., Misra, D. and Saha, K.N. (2009), "A parametric study on the growth of yield front in rotating annular disks", Int. J. Eng. Sci. Technol., 1(1), 190-204. 7
6 Bhowmick, S., Misra, D. and Saha, K. (2010), "Variational formulation based analysis on growth of yield front in high speed rotating solid disks", Int. J. Eng. Sci. Technol., 2(4), 200-219.
7 Callioglu, H., Sayer, M. and Demir, E. (2015), "Elastic-plastic stress analysis of rotating functionally graded discs", Thin-Wall. Struct., 94, 38-44. https://doi.org/10.1016/j.tws.2015.03.016   DOI
8 Ebrahimi, F. and Jafari, A. (2016), "A higher-order thermomechanical vibration analysis of temperature-dependent FGM beams with porosities", J. Eng., 1-20. https://doi.org/10.1155/2016/9561504
9 Ebrahimi, F. and Salari, E. (2015), "Thermo-mechanical vibration analysis of nonlocal temperature-dependent FG nanobeams with various boundary conditions", Compos. Part B: Eng., 78, 272-290. https://doi.org/10.1016/j.compositesb.2015.03.068   DOI
10 Ebrahimi, F. and Salari, E. (2016), "Effect of various thermal loadings on buckling and vibrational characteristics of nonlocal temperature-dependent functionally graded nanobeams", Mech. Adv. Mater. Struct., 23(12), 1379-1397. https://doi.org/10.1080/15376494.2015.1091524   DOI
11 Ebrahimi, F., Salari, E. and Hosseini, S.A.H. (2015), "Thermomechanical vibration behavior of FG nanobeams subjected to linear and non-linear temperature distributions", J. Thermal Stress., 38(12), 1360-1386. https://doi.org/10.1080/01495739.2015.1073980   DOI
12 Ebrahimi, F., Salari, E. and Hosseini, S.A.H. (2016), "In-plane thermal loading effects on vibrational characteristics of functionally graded nanobeams", Meccanica, 51(4), 951-977. https://doi.org/10.1007/s11012-015-0248-3   DOI
13 Ebrahimi, F., Mahmoodi, F. and Barati, M.R. (2017), "Thermo-mechanical vibration analysis of functionally graded micro/nanoscale beams with porosities based on modified couple stress theory", Adv. Mater. Res., Int. J., 6(3), 279-301. https://doi.org/10.12989/amr.2017.6.3.279
14 Kordkheili, S.A.H. and Naghdabadi, R. (2007), "Thermoelastic analysis of a functionally graded rotating disk", Compos. Struct., 79(4), 508-516. https://doi.org/10.1016/j.compstruct.2006.02.010   DOI
15 Hamed, M.A., Sadoun, A.M. and Eltaher, M.A. (2019), "Effects of porosity models on static behavior of size dependent functionally graded beam", Struct. Eng. Mech., Int. J., 71(1), 89-98. https://doi.org/10.12989/sem.2019.71.1.089
16 Jahromi, B.H., Nayeb-Hashemi, H. and Vaziri, A. (2012), "Elasto-plastic stresses in a functionally graded rotating disk", J. Eng. Mater. Technol., 134(2), 021004. https://doi.org/10.1115/1.4006023   DOI
17 Jha, K., Kumar, R., Verma, K., Chaudhary, B., Tyagi, Y.K. and Singh, S. (2018), "Application of modified TOPSIS technique in deciding optimal combination for bio-degradable composite", Vacuum, 157, 259-267. https://doi.org/10.1016/j.vacuum.2018.08.063   DOI
18 Madan, R. and Bhowmick, S. (2020), "A review on application of FGM fabricated using solid-state processes", Adv. Mater. Process. Technol., 1-12. https://doi.org/10.1080/2374068X.2020.1731153
19 Madan, R., Bhowmick, S. and Nath Saha, K. (2018), "Stress and deformation of functionally graded rotating disk based on modified rule of mixture", Mater. Today: Proceedings, 5(9), 17778-17785. https://doi.org/10.1016/j.matpr.2018.06.102   DOI
20 Madan, R., Saha, K. and Bhowmick, S. (2019a), "Limit elastic analysis of rotating annular disks having sigmoid-FGM composition based on MROM", World J. Eng., 16(6), 806-813. https://doi.org/10.1108/WJE-05-2019-0155   DOI
21 Madan, R., Saha, K. and Bhowmick, S. (2019b), "Limit Elastic Analysis of E-FGM Rotating Disk with Temperature Dependent Mechanical Properties", Mathe. Model. Eng. Problems, 6(4), 634-640. https://doi.org/10.18280/mmep.060419   DOI
22 Mahdavi, E., Ghasemi, A. and Alashti, R.A. (2016), "Elastic-plastic analysis of functionally graded rotating disks with variable thickness and temperature-dependent material properties under mechanical loading and unloading", Aerosp. Sci. Technol., 59, 57-68. https://doi.org/10.1016/j.ast.2016.10.011   DOI
23 Madan, R., Bhowmick, S. and Saha, K. (2019c), "Limit angular speed of L-FGM rotating disk for both temperature dependent and temperature independent mechanical properties. Materials Today: Proceedings, 18, 2366-2373. https://doi.org/10.1016/j.matpr.2019.07.080   DOI
24 Madan, R., Bhowmick, S. and Saha, K. (2020), "A Study based on Stress-Strain Transfer Ratio Calculation using Halpin-Tsai and MROM Material Model for Limit Elastic Analysis of Metal Matrix FG Rotating disk", FME Transact., 48, 204-210. https://doi.org/10.5937/fmet2001204R   DOI
25 Mahamood, R.M. and Akinlabi, E.T. (2017), "Future Research Direction in Functionally Graded Materials and Summary", In: Functionally Graded Materials, (R.M. Mahamood and E.T. Akinlabi), pp. 93-103. https://doi.org/10.1007/978-3-319-53756-6_6
26 Miyamoto, Y., Kaysser, W.A., Rabin, B.H., Kawasaki, A. and Ford, R.G. (Eds.) (1999), Functionally Graded Materials, (Volume 5), Springer US. https://doi.org/10.1007/978-1-4615-5301-4
27 Mortensen, A. and Suresh, S. (1995), "Functionally graded metals and metal-ceramic composites: Part 1 Processing", Int. Mater. Rev., 40(6), 239-265. https://doi.org/10.1179/imr.1995.40.6.239   DOI
28 Nakamura, T., Wang, T. and Sampath, S. (2000), "Determination of properties of graded materials by inverse analysis and instrumented indentation", Acta Material., 48(17), 4293-4306. https://doi.org/10.1016/S1359-6454(00)00217-2   DOI
29 Nayak, P. and Saha, K. (2016), "Elastic limit angular speed of solid and annular disks under thermomechanical loading", Int. J. Eng. Sci. Technol., 8(2), 30. https://doi.org/10.4314/ijest.v8i2.3   DOI
30 Nejad, M.Z., Rastgoo, A. and Hadi, A. (2014), "Exact elasto-plastic analysis of rotating disks made of functionally graded materials", Int. J. Eng. Sci., 85, 47-57. https://doi.org/10.1016/j.ijengsci.2014.07.009   DOI
31 Nie, G.J. and Batra, R.C. (2010), "Stress analysis and material tailoring in isotropic linear thermoelastic incompressible functionally graded rotating disks of variable thickness", Compos. Struct., 92(3), 720-729. https://doi.org/10.1016/j.compstruct.2009.08.052   DOI
32 Saif, M., Mullick, P. and Imam, A. (2019), "Analysis and structural design of various turbine blades under variable conditions: A review", Adv. Mater. Res., Int. J., 8(1), 11-24. https://doi.org/10.12989/amr.2019.8.1.011
33 Shackelford, J.F. and Alexander, W. (Eds.) (2001), CRC Materials Science and Engineering Handbook, (3rd ed.), CRC Press.
34 Zheng, Y., Bahaloo, H., Mousanezhad, D., Mahdi, E., Vaziri, A. and Nayeb-Hashemi, H. (2016), "Stress analysis in functionally graded rotating disks with non-uniform thickness and variable angular velocity", Int. J. Mech. Sci., 119, 283-293. https://doi.org/10.1016/j.ijmecsci.2016.10.018   DOI