1 |
Hanna, A.S., Camlic, R. and Peterson, P.A. (2002), "Quantitative definition of projects impacted by change orders", J. Construct. Eng. M., 128(1), 57-68. https://doi.org/10.1061/(ASCE)0733-9364(2002)128:1(57).
DOI
|
2 |
Heidebrecht, A. and Naumoski, N. (1999), "Seismic performance of ductile medium height reinforced concrete frame buildings design in accordance with the provisions of the 1995 National Building Code of Canada", Can. J. Civil Eng., 26(5), 606-617. https://doi.org/10.1139/l99-020.
DOI
|
3 |
Karayannis, C.G., Izzuddin, B.A. and Elnashai, A.S. (1994), "Application of adaptive analysis to reinforced concrete frames", J. Struct. Eng., 120(10), 2935-2957. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:10(2935).
DOI
|
4 |
Kermanshachi, S. and Rouhanizadeh, B. (2019), "Sensitivity analysis of construction schedule performance due to increased change orders and decreased labor productivity", In 7th CSCE International Construction Specialty Conference (ICSC). 12-15.
|
5 |
Kumar, B. (2014). "Shear walls - A review." Int. J. Innov. Res. Sci., Eng. Technol, 3(2), 9691-9694.
|
6 |
Navon, R., Shapira, A. and Shechori, Y. (2000), "Automated rebar constructability diagnosis", J. Construct. Eng. Manage., 126(5), 389-397. https://doi.org/10.1061/(ASCE)0733-9364(2000)126:5(389)
DOI
|
7 |
Paulay, T. and Williams, R.L. (1980), "The analysis and design of and the evaluation of design actions for reinforced concrete ductile shear wall structures", Bull. New Zealand Soc. Earthq. Eng., 13(2), 108-143. https://doi.org/10.5459/bnzsee.13.2.108-143
DOI
|
8 |
Sambasivan, M. and Soon, W.Y. (2007). "Causes and effects of delays in Malaysian construction industry", Int. J. Proj. Manag., 25(5), 517-526. https://doi.org/10.1016/j.ijproman.2006.11.007.
DOI
|
9 |
Sadjadi, R., Kianoush, M. and Talebi, S. (2007). "Seismic performance of reinforced concrete moment resisting frames", Eng. Struct., 29(9), 2365-2380. https://doi.org/10.1016/j.engstruct.2006.11.029.
DOI
|
10 |
Saiful Islam, A.B.M. and Sodangi, M. (2020), "Rubber bearing isolation for structures prone to earthquake - a cost effectiveness analysis", Earthq. Struct., 19(4), 261-272. http://dx.doi.org/10.12989/eas.2020.19.4.261.
DOI
|
11 |
Song, Y. and Chua, D.K. (2006), "Modeling of functional construction requirements for constructability analysis", J. Construct. Eng. Manag., 132(12), 1314-1326. https://doi.org/10.1061/(ASCE)0733-9364(2006)132:12(1314)
DOI
|
12 |
Taylor, T. and Ford, D.N. (2008), "Managing tipping point dynamics in complex construction projects", J. Construct. Eng. Manag, 134(6), 421-431. https://doi.org/10.1061/(ASCE)0733-9364(2008)134:6(421).
DOI
|
13 |
ETABS Ultimate (2020), Version 19.0 Computers and Structures, Inc., CSI Analysis Reference Manual for SAP2000, ETABS SAFE and CSiBridge
|
14 |
Rochette, P. and Labossiere, P. (2000), "Axial testing of rectangular column models confined with composites", J. Compos. Construct., 4(3), 129-136. https://doi.org/10.1061/(ASCE)1090-0268(2000)4:3(129).
DOI
|
15 |
Izzuddin B.A., Karayannis, C.G. and Elnashai, A.S. (1994), "Advanced nonlinear formulation for reinforced concrete beam-columns", J. Struct. Eng., 120(10), 2913-2934. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:10(2913).
DOI
|
16 |
Abdel Raheem, S.E., Ahmed, M.M.M., Ahmed, M.M. and Abdel-Shafy, A.G.A. (2018a), "Evaluation of plan configuration irregularity effects on seismic response demands of L-shaped MRF buildings", Bull. Earthq. Eng., 16(9), 3845-3869. https://doi.org/10.1007/s10518-018-0319-7.
DOI
|
17 |
Eusuf, M.A., Rashid, K.A., Noor, W.M. and Al Hasan, A. (2013), "Shear wall construction in buildings: A conceptual framework on the aspect of analysis and design", Appl. Mech. Mater., 268, 706-711. https://doi.org/10.4028/www.scientific.net/AMM.268-270.706.
DOI
|
18 |
Aly, N. and Galal, K. (2020), "Effect of ductile shear wall ratio and cross-section configuration on seismic behavior of reinforced concrete masonry shear wall buildings", J. Struct. Eng., 146(4), 04020020. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002542.
DOI
|
19 |
ASCE/SEI (Structural Engineering Institute) (2016), Minimum Design Loads for Buildings and Other Structures, ASCE7-116, Reston, VA.
|
20 |
Elwardany, H., Seleemah, A. and Jankowski, R. (2017), "Seismic pounding behaviour of multi-story buildings in series considering the effect of infill panels", Eng. Struct. 144(1), 1201-1217. https://doi.org/10.1016/j.engstruct.2017.01.078.
DOI
|
21 |
Filiatrault, A., Lachapelle, E. and Lamontagne, P. (1998), "Seismic performance of ductile and nominally ductile reinforced concrete moment resisting frames. I. Experimental study", Can. J. Civil Eng, 25(2), 331-341. https://doi.org/10.1139/l97-097.
DOI
|
22 |
Filiatrault, A., Lachapelle, E. and Lamontagne, P. (1998), "Seismic performance of ductile and nominally ductile reinforced concrete moment resisting frames. I. Experimental study", Can. J. Civil Eng., 25(2), 331-341. https://doi.org/10.1139/l97-097.
DOI
|
23 |
Mahmoud, S. Genidy, M. and Tahoon, H. (2017), "Time-history analysis of reinforced concrete frame buildings with soft storeys", Arab. J. Sci. Eng., 42(3), 1201-12017. https://doi.org/10.1007/s13369-016-2366-1.
DOI
|
24 |
Galal, K. and El-Sokkary, H. (2008), "Analytical evaluation of seismic performance of RC frames rehabilitated using FRP for increased ductility of members", J. Perform. Construct. Fac., 22(5), 276-288. https://doi.org/10.1061/(ASCE)0887-3828(2008)22:5(276).
DOI
|
25 |
Favvata, J. M., Naoum M. C. Karayannis, C.G. (2013). "Limit states of RC structures with first floor irregularities." Struct Eng Mech. 47(6), 791-818. https://doi.org/10.12989/sem.2013.47.6.791
DOI
|
26 |
ACI (American Concrete Institute) (2014), Building Code Requirements for Structural Concrete and Commentary. ACI314M-14, Farmington Hills.
|
27 |
El-Sokkary, H. and Galal, K. (2018), "Effect of preliminary selection of RC shear walls' ductility level on material quantities", Int. J. Concrete Struct. Mater., 12(1), 1-14. https://doi.org/10.1186/s40069-018-0273-4.
DOI
|
28 |
Favvata, J.M., Karayannis, C.G. and Liolios. A.A. (2009), "Influence of exterior joint effect on the inter-story pounding interaction of structures", Struct. Eng. Mech., 33(2):113-136. https://doi.org/10.12989/sem.2009.33.2.113.
DOI
|