1 |
AASHTO. (2014). Guide Specifications for Seismic Isolation Design. Washington, DC.
|
2 |
Ahmad, F. and Wong, J. (2018), "Effect of vertical ground acceleration on isolated structures", Proceedings of the 3rd Huixian Internal Forum on Earthquake Engineering, Urbana-Champaign, IL. August.
|
3 |
Ancheta, T.D., Darragh, R.B., Stewart, J.P., Seyhan, E., Silva, W.J., Chiou, B.S.J., Wooddell, K.E., Graves, R.W., Kottke, A.R., Boore, D.M., Kishida, T. and Donahue, J.L. (2013), PEER 2013/03-PEER NGA-West2 Database, Pacific Earthquake Engineering Research Center, Berkeley, U.S.A.
|
4 |
Berton, S., Bolander, J.E. and Pasian A. (2008), "Bi-direcitonal response of base isolated structures subjected to near-fault ground motions", Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China. October.
|
5 |
Whittaker, A.S. and Soong, T.T. (2003), "An overview of nonstructural components research at three U.S. earthquake engineering research centers", Seminar on Seismic Design, Performance, and Retrofit of Nonstructural Components in Critical Facilities, Applied Technology Council, ATC-29-2: 271-280, Redwood City, CA.
|
6 |
McCallen, D. and Larsen, S. (2003), "NEVADA - A simulation environment for regional estimation of ground motion and structural response", UCRL-ID-152115. Livermore, CA, U.S.A.
|
7 |
Constantinou, M.C., Whittaker, A.S., Kalpakidis, Y., Fenz, D.M. and Warn, G.P. (2008), "Performance of seismic isolation hardware under service and seismic loading", Technical Report MCEER-07-0012, Multidisciplinary Center for Earthquake Engineering Research (MEER), Buffalo, NY, U.S.A.
|
8 |
EQE (1994), January 17, 1994 Northridge, CA Earthquake: An EQE Summary Report
|
9 |
FEMA P-58-1 (2012), "Seismic performance assessment of buildings", FEMA P-58-1. Washington, DC.
|
10 |
McKenna F. and Fenves G.L. (2000), Open System for Earthquake Engineering Simulation. University of California, Berkeley, CA, U.S.A.
|
11 |
Naeim, F. and Kelly, J.M. (1999), Design of Seismic Isolated Structures: From Theory to Practice. Hoboken: Wiley and Sons.
|
12 |
Pavlidou, C. and Komodromos, P. (2020), "Peak seismic response of a symmetric base-isolated steel building: near vs. far fault excitations and varying incident angle", Earthq. Struct., 18(3), 349-365. http://dx.doi.org/10.12989/eas.2020.18.3.349.
DOI
|
13 |
Ungar, E.E. (2007). "Vibration criteria for healthcare facility floors", Sound Vib Mag, September, 26-27.
|
14 |
Warn, G.P. and Ryan, K.L. (2012), "A review of seismic isolation for buildings: Historical development and research needs", Buildings, 2.4, 300-325. https://doi.org/10.3390/buildings2030300.
DOI
|
15 |
Ryan, K.L., Dao, N.D., Sato, E., Sasaki, T. and Okazaki, T. (2012), "Aspects of Isolation Device Behavior Observed from Full-Scale Testing of an Isolated Building at E-Defense", Proceedings of the 20th Analysis & Computation Specialty Conference, Chicago, IL, U.S.A.
|
16 |
Sanchez, J., Masroor, A., Mosqueda and G., Ryan, K. (2012), "Static and dynamic stability of elastomeric bearings for seismic protection of structures", J. Struct. Eng., 139(7). https://doi.org/10.1061/(ASCE)ST.1943-541X.0000660.
DOI
|
17 |
Serror, M.H., El-Gazzar, S.O. and Mourad, S.A. (2015), "Simplified procedures for seismic analysis of base-isolated structures", Earthq. Struct., 8(5), 1091-111. http://dx.doi.org/10.12989/eas.2015.8.5.1091.
DOI
|
18 |
Taghavi, S. and Miranda, E. (2003), Response Assessment of Nonstructural Building Elements, PEER 2003/05. Berkeley, CA.
|
19 |
Tajammolian, H., Khoshnoudian, F., Talaei, S. and Loghman, V. (2014), "The effects of peak ground velocity of near-field ground motions on the seismic responses of base-isolated structures mounted on friction bearings", Earthq. Struct., 7(6), 1159-1282. http://dx.doi.org/10.12989/eas.2014.7.6.1159.
DOI
|
20 |
Gunay, M.S. and Mosalam, K.M. (2012). "PEER Performance Based Earthquake Engineering Methodology", Proceedings of the 15th World Conference on Earthquake Engineering. Lisbon, Spain.
|
21 |
Gavin, H.P. and Zaicenco, A. (2007), "Performance and reliability of semi-active equipment isolation", J. Sound Vib., 306, 74-90. https://doi.org/10.1016/j.jsv.2007.05.039.
DOI
|
22 |
Kelly, J.M. (1986), "Aseismic base isolation: Review and bibliography", Soil Dyn. Earthq. Eng., 5, 202-216. https://doi.org/10.1016/0267-7261(86)90006-0.
DOI
|
23 |
Singh, M.P., Suarez, L.E., Matheu, E.E. and Maldonado, G.O. (1993), "Simplified procedures for seismic design of nonstructural components and assessment of current code provisions", Report NCEER-93-0013, National Center for Earthquake Engineering Research, Buffalo, N.Y.
|
24 |
Inaudi, J.A. and Kelly, J.M. (1993), "Hybrid isolation systems for equipment protection", Earthq. Eng. Struct. Dyn., 22, 297-313. https://doi.org/10.1002/eqe.4290220403.
DOI
|
25 |
Ismail, M., Rodellar, J. and Ikhouane F. (2009), "An innovative isolation bearing for motion-sensitive equipment", J. Sound Vib., 326, 503-521. https://doi.org/10.1016/j.jsv.2009.06.022.
DOI
|
26 |
Iwatsubo, T. (1998). "Damage to industrial equipment in the 1995 Hyogoken-Nanbu Earthquake", Nuclear Eng. Des., 181, 41-53. https://doi.org/10.1016/S0029-5493(97)00333-6.
DOI
|
27 |
Guzman Pujols, J.C. and Ryan, K.L. (2018), "Computational simulation of slab vibration and horizontal-vertical coupling in a full-scale test bed subjected to 3D shaking at E-Defense", Earthq. Eng. Struct. Dyn., 47, 438-459. https://doi.org/10.1002/eqe.2973.
DOI
|
28 |
Ismail, M., Casas, J.R. and Rodellar, J. (2013), "Near-fault isolation of cable-stayed bridges using RNC isolator", Eng. Struct., 56, 327-342. https://doi.org/10.1016/j.engstruct.2013.04.007.
DOI
|
29 |
Jangid, R.S. (2007), "Optimum lead-rubber isolation bearings for near-fault motions", Eng. Struct., 29, 2503-2513. https://doi.org/10.1016/j.engstruct.2006.12.010.
DOI
|
30 |
Kitayama, S. and Constantinou, M.C. (2019), "Probabilistic seismic performance assessment of seismically isolated buildings designed by the procedures of ASCE/SEI 7 and other enhanced criteria", Eng. Struct., 179 (15), 566-582. https://doi.org/10.1016/j.engstruct.2018.11.014.
DOI
|
31 |
Milanchian, R., Hosseini, M. and Nekooei, M. (2017), "Vertical isolation of a structure based on different states of seismic performance", Earthq. Struct., 13(2), 103-118. http://dx.doi.org/10.12989/eas.2017.13.2.103.
DOI
|
32 |
Searer, G.R. and Freeman, S.A. (2002), "Unintended consequences of code modification", Proceedings of the 7th U.S. National Conference on Earthquake Engineering, EERI, Boston, MA, U.S.A.
|
33 |
Villaverde, R. (1996), "Earthquake resistant design of secondary structures: a report on the state of the art", Proceedings of the Eleventh World Conference on Earthquake Engineering, Elsevier Science Ltd., Oxford, England.
|
34 |
Alhan, C. and Gavin, H.P. (2005), "Reliability of base isolation for the protection of critical equipment from earthquake hazards", Eng. Struct., 27(9), 1435-1449.
DOI
|
35 |
Alhan, C. and Sahin, F. (2011), "Protecting vibration-sensitive contents: an investigation of floor accelerations in seismically isolated buildings", Bull. Earthq. Eng., 9, 1203-1226, https://doi.org/10.1016/j.engstruct.2005.04.007.
DOI
|
36 |
ASCE/SEI Standard 7-16 (2017), Minimum Design Loads for Buildings and Other Structures ASCE/SEI Standard 7-16, American Society of Civil Engineers; Reston, VA, U.S.A.
|
37 |
Johansen, H., Rodgers, A., Petersson, N.A., McCallen, D., Sjogreen, B. and Miah, M. (2017), "Toward exascale earthquake ground motion simulations for near-fault engineering analysis", Comput. Sci. Eng., September/October, 27-37. https://doi.org/10.1109/MCSE.2017.3421558.
DOI
|
38 |
Stone, R. (2008), "Damaged university mourns its dead and plans fast recovery", Science, 320, 1145. https://doi.org/10.1126/science.320.5880.1145a.
DOI
|
39 |
Wolff, E.D., Ipek, C., Constantinou, M.C. and Tapan, M. (2015), "Effect of viscous damping devices on the response of seismically isolated structures", Earthq. Eng. Struct. Dyn., 44 (2), 185-198. https://doi.org/10.1002/eqe.2464.
DOI
|
40 |
Wong, J.B. (2014), Assessment of the Effect of Different Isolation Systems on Seismic Response of a Nuclear Power Plant. University of California, Berkeley.
|
41 |
Buckle, I.G. and Mayes, R.L. (1990), "Seismic isolation: History, application, and performance - A world view", Earthq. Spectra, 6(2), 161-201. https://doi.org/10.1193%2F1.1585564.
DOI
|
42 |
Cichowicz, A. (2010), "Near-field ground motion modal versus wave propagation analysis", Shock Vib., 17, 611-617. https://doi.org/10.1155/2010/359853.
DOI
|
43 |
Archila, M., Ventura, C.E., Liam Finn and W.D. (2017), "New insights on effects of directionality and duration of near-field ground motions on seismic response of tall buildings", Struct. Des. Tall Spec. Build., 26(11), https://doi.org/10.1002/tal.1363.
DOI
|
44 |
Kang, B.S., Li, L. and Ku, T.W. (2009), "Dynamic response characteristics of seismic isolation systems for building structures", J. Mech. Sci. Technol., 23, 2179-2192. https://doi.org/10.1007/s12206-009-0437-x.
DOI
|
45 |
Kelly, J.M. (1996), "Earthquake protection through seismic isolation", Proceedings of the 13th Triennial World Congress. San Francisco, CA, U.S.A.
|
46 |
Khechfe, H., Noori, M., Hou, Z., Kelly, J. and Ahmadi, G. (2002), "An experimental study on the seismic response of base-isolated secondary systems", J. Pressure Vessel Technol., 124, 81-88. https://doi.org/10.1115/1.1445795.
DOI
|
47 |
EPRI (2013), "Seismic isolation of nuclear power plants", Electric Power Research Institute, Report: 3002000561. Palo Alto, CA.
|
48 |
Escalona, O. and Wong, J. (2018), "Rigid body response & performance based design of seismically isolated structures", Proceedings of the 11NCEE. Los Angeles, CA, U.S.A.
|
49 |
FEMA-445 (2006), "Next-generation performance-based seismic design guidelines", FEMA-445. Washington, DC.
|
50 |
Foo, S. and Lau, D. (2004), "Seismic risk reduction of operational and functional components of buildings: research perspective", Proceedings of the 13th World Conference on Earthquake Engineering. British Columbia, Canada.
|
51 |
Filiatrault, A. and Sullivan, T. (2014), "Performance-based seismic design of nonstructural building components: The next frontier of earthquake engineering", Earthq. Eng. Eng. Vib., 13,17-46. https://doi.org/10.1007/s11803-014-0238-9.
DOI
|
52 |
Gordon, C.G. (1991). "Generic criteria for vibration sensitive equipment", Int. Soc. Optical Eng., 1619, 71-85. https://doi.org/10.1117/12.363802.
DOI
|
53 |
Hall, J.F., Heaton, T.H., Halling, M.W. and Wald, D.J. (1995), "Near-source ground motion and its effects on flexible buildings", Earthq. Spectra, 11, 569-605. http://dx.doi.org/10.1193/1.1585828.
DOI
|
54 |
EERI (2010), "The Mw 8.8 Chile Earthquake of February 27, 2010", EERI Special Earthquake Report, 1-20.
|
55 |
Pujols, J.C.G. and Ryan, K.L. (2016), "Development of Generalized Fragility Functions for Seismically Induced Content Disruption", Earthq. Spectra, 32(3), 1303-1324. https://doi.org/10.1193%2F081814EQS130M.
DOI
|