1 |
Karimi, R. and Rahimi, S. (2019), "Performance-based plastic design for seismic rehabilitation of high rise frames with eccentric bracing and vertical link", Earthq. Struct., 17 (6), 623-633. http://dx.doi.org/10.12989/eas.2019.17.6.623.
DOI
|
2 |
Li, S., Tian, J.B. and Liu, Y.H. (2017), "Performance-based seismic design of eccentrically braced steel frames using target drift and failure mode", Earthq. Struct., 13(5), 443-454. http://dx.doi.org/10.12989/eas.2017.13.5.443.
DOI
|
3 |
Kappos, A.J. and Panagopoulos, G. (2004), "Performance-based seismic design of 3D R/C buildings using inelastic static and dynamic analysis procedures", ISET J. Earthq. Tech., IIT Roorkee, 41(1), Paper No. 444, 141-158.
|
4 |
FEMA 356 (2000), Prestandard and commentary for the seismic rehabilitation of buildings, Federal Emergency Management Agency, Washington, DC, U.S.A.
|
5 |
Bertero, R.D. and Bertero, V.V. (2004), "Performance-based seismic engineering: development and application of a comprehensive conceptual approach to the design of buildings", Earthquake Engineering: From Engineering Seismology to Performance-Based Engineering (edited by Y. Bozorgnia and VV Bertero), CRC Press, Boca Raton, U.S.A.
|
6 |
Allahvirdizadeh, R. and Mohammadi, M.A. (2016), "Upgrading equivalent static method of seismic designs to performance-based procedure", Earthq. Struct., 10(4), 849-865.
DOI
|
7 |
Amiri, G.G. and Rajabi, E. (2018), "Maximum damage prediction for regular reinforced concrete frames under consecutive earthquakes", Earthq. Struct., 14(2), 129-142. http://dx.doi.org/10.12989/eas.2018.14.2.129.
DOI
|
8 |
ASCE/SEI 41 (2017), Seismic evaluation and retrofit of existing buildings, American Society of Civil Engineers, Virginia, U.S.A.
|
9 |
Bertero, V.V. (1996), "The need for multi-level seismic design criteria," Proceedingsof the 11th World Conference on Earthquake Engineering, Acapulco, Mexico, Paper No.2120.
|
10 |
Dooley, K.L. and Bracci, J.M. (2001), "Seismic evaluation of column-to-beam strength ratios in reinforced concrete frames", Struct. J., ACI, 98(6), 843-851. https://doi.org/10.14359/10751.
DOI
|
11 |
Sunitha, P. (2017), "Seismic Design of Low-Rise RC Moment Frame Buildings Rationalised with Earthquake Resistant Design Philosophy", Ph.D. Dissertation, Indian Institute of Technology Madras, Chennai, India.
|
12 |
Chao, S.H. and Goel, S.C. (2008), Performance-Based Plastic Design of Earthquake Resistant Steel Structures, International Code Council, Country Club Hills, IL, U.S.A.
|
13 |
CSI (2011), Nonlinear analysis and performance assessment for 3D Structures, PERFORM-3D, Computers and Structures Inc., Berkeley, U.S.A.
|
14 |
Dhakal, R.P. (2014), "Seismic design of buildings: looking towards the future", 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23), Southern Cross University, Lismore, NSW.
|
15 |
Tsang, H.H. (2018), "Recommended seismic performance requirements for building structures in Hong Kong", Earthq. Struct., 15(1), 9-17. http://dx.doi.org/10.12989/eas.2018.15.1.009.
DOI
|
16 |
Uang, C.M. (1993), "An evaluation of two-level seismic design procedure", Earthq. Spectra, EERI, 9(1), 121-135. https://doi.org/10.1193/1.1585708.
DOI
|
17 |
Whittaker, A. Constantinou, M. and Tsopelas, P. (1998), "Displacement estimates for performance-based seismic design", J. Struct. Eng., (ASCE), 905-912. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:8(905).
DOI
|
18 |
Zeris, C.A. and Repapis, C.C. (2018), "Comparison of the seismic performance of existing RC buildings designed to different codes", Earthq. Struct., 14(6), 505-523, http://dx.doi.org/10.12989/eas.2018.14.6.505.
DOI
|
19 |
Zou, X.K., Chan, C.M., Li, G. and Wang, Q. (2007), "Multiobjective optimisation for performance-based design of reinforced concrete frames", J. Struct. Eng., (ASCE), 1462-1474. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:10(1462).
DOI
|
20 |
Anwar, N. Aung, T.H. Norachan, P. and Badar, A.M. (2016), "Case Study: Performance-based seismic design of reinforced concrete dual system building", Proceedings of the 6th Asia Conference on Earthquake Engineering, Marco Polo Plaza Cebu, Cebu City, Philippines.
|
21 |
Hsu, T.T.C. (1992), Unified Theory of Reinforced Concrete, CRC Press Inc., Boca Raton, FL, U.S.A. https://doi.org/10.12989/eas.2016.10.4.849.
|
22 |
Huang, Y.N., Whittaker, A.S., Luco, N. and Hamburger, R.O. (2009), "Scaling ground motions for performance-based assessment of buildings", J. Struct. Eng., (ASCE), 311-321. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000155.
DOI
|
23 |
Housner, G.W. (1956), "Limit design of structures to resist earthquakes", Proceedings of the 1st World Conference on Earthquake Engineering, California, USA, 1-13.
|
24 |
Han-Seon, L. and Ki-Hyun, J. (2018), "Performance-based earthquake engineering in a lower seismicity region: South Korea", Earthq. Struct., 15(1), 45-65. https://doi.org/10.12989/eas.2018.15.1.045.
DOI
|
25 |
Filiatrault, A. and Sullivan, T. (2014), "Performance-based seismic design of nonstructural building components: The next frontier of earthquake engineering", Earthq. Eng. Eng. Vib. 13 (S1), 17-46. https://doi.org/10.1007/s11803-014-0238-9.
DOI
|
26 |
Housner, G.W. and Jennings, P.C. (1982), Earthquake Design Criteria, EERI Monograph Series, EERI, Oakland, California, U.S.A.
|
27 |
IS 13920 (2016), Indian standard ductile detailing of reinforced concrete structures subjected to seismic forces - Code of practice, Bureau of Indian Standards, New Delhi, India.
|
28 |
IS 1893 (Part 1) (2016), Indian standard criteria for earthquake resistant design of structures-Part 1: General provisions and buildings, Bureau of Indian Standards, New Delhi, India.
|
29 |
Kam, W.Y. and Pampanin, S. (2012), "Revisiting performance-based seismic design in the aftermath of the Christchurch 2010-2011: raising the bar to meet social expectations", Proceedings of the 15th World Conference on Earthquake Engineering, Lisbon, Portugal, Paper No.4550.
|
30 |
Priestley, M.J.N., Calvi, G.M. and Kowalsky, M.J. (2007), Displacement-based Seismic Design of Structures, IUSS Press, EU Centre, Pavia, Italy.
|
31 |
Mander, J.B. Priestley, M.J.N. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Eng., (ASCE), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804).
DOI
|
32 |
Nassar, A.A. and Krawinkler, H. (1991), "Seismic Demands for SDOF and MDOF Systems", Report No. 95, John A. Blume Earthquake Engineering Center, Stanford University, California, U.S.A.
|
33 |
Paulay, T. and Priestley, M.J.N. (1992), Seismic Design of Reinforced Concrete and Masonry Buildings. John Wiley & Sons, Inc, U.S.A.
|
34 |
SEAOC Blue Book (1990), Recommended lateral force requirements and commentary, SEAOC Seismology Committee, Structural Engineers Association of California, CA, U.S.A.
|
35 |
PEER (Pacific Earthquake Engineering Center) (2017), "Tall Buildings Initiative: Guidelines for Performance-Based Seismic Design of Tall Buildings", Report No. 2017/06, University of California, Berkeley, U.S.A.
|
36 |
Ramon, J.G.C., Halder, A., Azizsoltani, H., Federico, V.B. and Alfredo, R.S. (2018), "Performance-based seismic design of steel buildings using rigidities of connections", J. Risk Uncertainty Eng. Syst., 04017036-1-14. https://doi.org/10.1061/AJRUA6.0000943.
DOI
|
37 |
Reyes, J.C. and Kalkan, E. (2012), "How many records should be used in an ASCE/SEI-7 ground motion scaling procedure?", Earthq. Spectra, 28(3), 1223-1242. https://doi.org/10.1193/1.4000066.
DOI
|
38 |
SEAOC Blue Book (1999), Recommended lateral force requirements and commentary, SEAOC Seismology Committee, Structural Engineers Association of California CA, U.S.A.
|
39 |
Priestley, M.J.N. (2000), "Performance-based seismic design", Proceedings of the 12th World Conference on Earthquake Engineering, Auckland, New Zealand, Paper No. 283,
|
40 |
CSI (2012), Structural analysis program, SAP 2000, Version 15, Computers and Structures Inc., Berkeley, U.S.A.
|
41 |
Kuntz, G.L. and Browning, J.A. (2003), "Reduction of column yielding during earthquake for reinforced concrete frames", Struct. J., ACI, 100(5), 573-580. https://doi.org/10.14359/12798.
DOI
|
42 |
Vamvatsikos, D. Kazantzi, A.K. and Aschheim, M.A. (2016), "Performance-based seismic design: Avant-Garde and code-compatible approaches", J. Risk Uncertainity Eng. Syst., (ASCE), 4015008-1-9. https://doi.org/10.1061/AJRUA6.0000853.
DOI
|
43 |
IS 456 (2000), Indian standard plain and reinforced concrete, Bureau of Indian Standards, New Delhi, India.
|
44 |
Teran-Gilmore, A., Sanchez-Badilo, A. and Espinosa-Johnson, M. (2010), "Performance-based seismic design of reinforced concrete ductile buildings subjected to large energy demands", Earthq. Struct., 1(1), 69-91. https://doi.org/10.12989/eas.2010.1.1.069.
DOI
|