Browse > Article
http://dx.doi.org/10.12989/eas.2021.20.3.353

Comparison of classical and reliable controller performances for seismic response mitigation  

Kavyashree, B.G. (Manipal School of Architecture and Planning, Manipal Academy of Higher Education)
Patil, Shantharama (Manipal School of Architecture and Planning, Manipal Academy of Higher Education)
Rao, Vidya S. (Department of Instrumentation & Control Engineering, Manipal Institute of Technology, Manipal Academy of Higher Education)
Publication Information
Earthquakes and Structures / v.20, no.3, 2021 , pp. 353-364 More about this Journal
Abstract
Natural hazards like earthquakes, high winds, and tsunami are a threat all the time for multi-story structures. The environmental forces cannot be clogged but the structures can be prevented from these natural hazards by using protective systems. The structural control can be achieved by using protective systems like the passive, active, semi-active, and hybrid protective systems; but the semi-active protective system has gained importance because of its adaptability to the active systems and reliability of the passive systems. Therefore, a semi-active protective system for the earthquake forces has been adopted in this work. Magneto-Rheological (MR) damper is used in the structure as a semi-active protective system; which is connected to the current driver and proposed controller. The Proportional Integral Derivative (PID) controller and reliable PID controller are two proposed controllers, which will actuate the MR damper and the desired force is generated to mitigate the vibration of the structural response subjected to the earthquake. PID controller and reliable PID controller are designed and tuned using Ziegler-Nichols tuning technique along with the MR damper simulated in Simulink toolbox and MATLAB to obtain the reduced vibration in a three-story benchmark structure. The earthquake is considered to be uncertain; where the proposed control algorithm works well during the presence of earthquake; this paper considers robustness to provide satisfactory resilience against this uncertainty. In this work, two different earthquakes are considered like El-Centro and Northridge earthquakes for simulation with different controllers. In this paper performances of the structure with and without two controllers are compared and results are discussed.
Keywords
seismic response; semi-active system; MR damper; PID controller; reliable controller;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Heidari, A.H., Etedali, S. and Javaheri-Tafti, M.R. (2018), "A hybrid LQR-PID control design for seismic control of buildings equipped with ATMD", Front. Struct. Civ. Eng., 12(1), 44-57. https://doi.org/10.1007/s11709-016-0382-6.   DOI
2 Housner, G.W. (1997), "Structural control: Past, Present, and Future", J. Eng. Mech, 123, 897-971. https://doi.org/10.1061/(ASCE)0733-9399(1997)123:9(897).   DOI
3 Hu, G., Liu, Q., Ding, R. and Li, G. (2017), "Vibration control of semi-active suspension system with magnetorheological damper based on hyperbolic tangent model", Advan. Mech. Eng., 9(5), 1-15. https://doi.org/10.1177/1687814017694581.   DOI
4 Jansen, L. and Dyke, S. (2000), "Semi-active control strategies for MR dampers: comparative study", J. Eng. Mech., 126(8), 795-803. https://doi.org/10.1061/(ASCE)0733-9399(2000)126:8(795).   DOI
5 Khajekaramodin, A., Haji-kazemi, H., Rowhanimanesh, A. and Akbarzadeh, M.R. (2009), "Semi-active control of structures using neuro-inverse model of MR dampers", Scientia Iranica, 16(3), 256-263.
6 Li, L. and Liang, H. (2018), "Semiactive Control of Structural Nonlinear Vibration Considering the MR Damper Model", J. Aerosp. Eng., 31(6), 04018095. https://doi.org/10.1061/(ASCE)AS.1943-5525.0000902.   DOI
7 Li, Y., Li, J., Li, W. and Du, H. (2014), "A state-of-the-art review on magnetorheological elastomer devices", Smart Mater. Struct., 23(12), 123001.   DOI
8 Mohammadi, R.K., Mirjalaly, M., Mirtaheri, M. and Nazeryan, M. (2018), "Comparison between uniform deformation method and Genetic Algorithm for optimizing mechanical properties of dampers", Earthq. Struct., 14(1), 1-10. https://doi.org/10.12989/eas.2018.14.1.001.   DOI
9 Ogata., K. (1990), Modern Control Engineering, Prentice Hall, Upper Saddle River, N.J.
10 Oliveira, F., Botto, M. A., Morais, P. and Suleman, A. (2018), "Semi-active structural vibration control of base-isolated buildings using magnetorheological dampers", J. Low Freq. NoiseV.A., 37(3), 565-576. https://doi.org/10.1177/1461348417725959.   DOI
11 PEER (2018), Pacific Earthquake Engineering Research Center Strong Ground Motion Database, http://ngawest2.berkeley.edu/
12 Peng, Y. and Zhang, Z. (2020), "Optimal MR damper-based semi-active control scheme for strengthening seismic capacity and structural reliability", J. Eng. Mech., 146(6), 04020045. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001768.   DOI
13 Ramirez, D.F.L., Gonzalez, P.E.T., Ferguson, l., Brennan, M. and Tang, B. (2019), "Recent advances in shock vibration isolation: an overview and future ossibilities", Appl. Mech. Rev., 71, 060802-1. https://doi.org/10.1115/1.4044190.   DOI
14 Rao, V.S., George, V.I., Kamath, S. and Shreesha, C. (2016), "Performance evaluation of reliable H infinity observer controller with robust PID controller designed for Trms with sensor, actuator failure", Far East J. Electron. Comm., 16(2), 355-380. https://doi.org/10.17654/EC016020355.   DOI
15 Caicedo, J.M., Jiang, Z. and Baxter, S.C. (2017), "Including uncertainty in modeling the dynamic response of a large-scale 200 kN magneto-rheological damper", J. Risk Uncertain. Eng. Syst., Part A: Civil. Eng., 3(2), G4016002. https://doi.org/10.1061/AJRUA6.0000873.   DOI
16 MATLAB R2014 b and Simulink, licensed version.
17 Aggumus, H. and Guclu, R. (2020), "Robust H∞ control of STMDs used in structural systems by hardware in the loop simulationmethod",Actuators, 9, 55. https://doi.org/10.3390/act9030055.   DOI
18 Aly, A.M. (2013), "Vibration control of buildings using magneto-rheological damper: A new control algorithm", J. Eng., 2013, 1-10. https://doi.org/10.1155/2013/596078   DOI
19 Cruze, D., Gladston, H., Farsangi, E.N., Banerjee, A., Loganathan, S. and Solomon, S.M. (2021), "Seismic performance evaluation of a recently developed magnetorheological damper: experimental investigation", Pract. Period. Struct. Des. Construct., 26(1), 04020061. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000544.   DOI
20 Dyke, S.J. and Spencer, B.F. (1997), "A comparison of semi-active control strategies for the MR damper", Proceedings of the IASTED International Conference, Intelligent Information Systems, The Bahamas, December.
21 Dyke, S.J., Spencer, B.F, Sain, M.K. and Carlson, J.D. (1996), "Modeling and control of magneto-rheological dampers for seismic response reduction", Smart Mater. Struct., 5(5), 565-575. https://doi.org/10.1088/0964-1726/5/5/006   DOI
22 Etedali, S., Sohrabi, M.R. and Tavakoli, S. (2013), "An independent robust modal PID control approach for seismic control of buildings", J. Civil Eng. Urban., 3(5), 279-291. http://www.ojceu.ir/main/attachments/article/27/J.%20Civil%20Eng.%20Urban.,43-279-291.pdf.
23 Ge, M., Chiu, M. and Wang, Q. (2002), "Robust PID controller design via LMI approach", J. Process Control, 12, 3-13. https://doi.org/10.1016/S0959-1524(00)00057-3.   DOI
24 Gu, X., Yu, Y., Li, J., Li, Y. and Alamdari, M.M. (2016), "Semi-active storey isolation system employing MRE isolator with parameter identification based on NSGA-II with DCD", Earthq. Struct., 11(6), 1101-1120. https://doi.org/10.12989/eas.2016.11.6.1101.   DOI
25 Guclu, R. (2006), "Sliding mode and PID control of a structural system against earthquake", Matham. Comput. Modelling, 44, 210-217. https://doi.org/10.1016/j.mcm.2006.01.014.   DOI
26 Samani, H.R., Mirtaheri, M. and Zandi A.P. (2017), "The study of frictional damper with various control algorithms", Earthq. Struct., 12(5), 479-487. https://doi.org/10.12989/eas.2017.12.5.479.   DOI
27 Sen, M.A., Tinkir, M. and Kalyoncu, M. (2018), "Optimisation of a PID controller for a two-floor structure under earthquake excitation based on the bees algorithm", J. Low Frequency Noise, Vib. Active Control, 37(1), 107-127. https://doi.org/10.1177/1461348418757906.   DOI
28 Spencer, B.F., Dyke, S.J. and Sain, M. (1997), "Phenomenological model for magneto-rheological dampers", J. Eng. Mech., 123(3), 230-238. https://doi.org/10.1061/(ASCE)0733-9399(1997)123:3(230).   DOI
29 Spencer, B.F. (2004), "Benchmark structural control problems for seismic and wind-excited structures: Editorial", J. Eng. Mech., 130(4), 363-365. https://doi.org/ 10.1061/(ASCE)0733-9399(2004)130:4(363).   DOI
30 Spencer, B.F. and Nagarajaiah, S. (2003), "State of the art of structural control", J. Struct. Eng., 129(7), 845-856. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:7(845).   DOI
31 Thenozhi, S. and Yu, W. (2013), "Advances in modeling and vibration control of building structures", Annu. Rev. Control, 37(2), 346-364. https://doi.org/ 10.1016/j.arcontrol.2013.09.012.   DOI
32 Uz, M.E. and Hadi, N.S.M. (2014), "Optimal design of semi active control for adjacent buildings connected by MR damper based on integrated fuzzy logic and multi-objective genetic algorithm", Eng. Struct., 69, 135-148. https://doi.org/10.1016/j.engstruct.2014.03.006.   DOI
33 Yang, G., Spencer B.F., Carlson, J.D. and Sain, M.K. (2002), "Large-scale MR fluid dampers: modeling and dynamic performance considerations", Eng. Struct., 24, 309-323. https://doi.org/10.1016/S0141-0296(01)00097-9.   DOI
34 Yang, G., Spencer, B.F., Jung, H.J. and Carlson, J.D. (2004), "Dynamic modeling of large-scale magneto-rheological damper systems for civil engineering applications", J. Eng. Mech., 130(9), 1107-1114. https://doi.org/10.1061/(ASCE)0733-9399(2004)130:9(1107).   DOI
35 Yu, W., Thenozhi, S. and Li, X. (2014), "Stable active vibration control system for building structures using PD / PID Control", The International Federation of Automatic Control, Cape Town, South Africa, August.
36 Yu, Y., Royel, S., Li, J., Li, Y. and Ha, Q. (2016), "Magneto-rheological elastomer base isolator for earthquake response mitigation on building structures: modeling and second-order sliding mode control", Earthq. Struct., 11(6), 943-967. http://dx.doi.org/10.12989/eas.2016.11.6.943.   DOI
37 Zambare, H., Khoje, A., Patil, S. and Razban, A. (2021), "MR Damper Modeling Performance Comparison Including Hysteresis and Damper Optimization", IEEE Access, 9, 24560-24569. https://doi.org/10.1109/ACCESS.2021.3057174.   DOI
38 Chopra, A.K. (1995), Dynamics of Structures, Theory and Applications to Earthquake Engineering, Prentice Hall, Upper Saddle River, N.J.
39 Camacho, J.R.G., Haldar, A., Salazar, A.R., Beltran, F.V., Becerra, G.E.V. and Hernandez, A.O.V. (2018), "Alternative reliability-based methodology for evaluation of structures excited by earthquakes", Earthq. Struct., 14(4), 361-377. https://doi.org/10.12989/eas.2018.14.4.361.   DOI
40 Chen, X., Li, J., Li, Y. and Gu, X. (2016), "Lyapunov-based semi-active control of adaptive base isolation system employing magneto-rheological elastomer base isolators", Earthq. Struct., 11(6), 1077- 1100. https://doi.org/10.12989/eas.2016.11.6.1077   DOI