1 |
ABAQUS (2013), "Online documentation", SIMULIA Inc.
|
2 |
ACI 318-08 (2008), "Building code requirements for structural concrete and commentary", American Concrete Institute.
|
3 |
Dolatshahi, K.M. (2012), "Computational, analytical and experimental modeling of masonry structures", State Univ. New York at Buffalo.
|
4 |
ElGawady, M., Lestuzzi, P. and Badoux, M. (2007), "Static cyclic response of masonry walls retrofitted with fiber-reinforced polymers", J. Compos. Construct, 11(1), 50-61. https://doi.org/10.1061/(ASCE)1090-0268(2007)11:1(50).
DOI
|
5 |
EN-12390-3 (2009), "Testing hardened concrete - part 3: compressive strength of test specimens", European Committee for Standardization, Brussels, Belgium:
|
6 |
EN 1052-3 (2007), "Methods of test for masonry, Part 3: determination of initial shear strength", European Standard.
|
7 |
FEMA-F.461 (2007), "Interim protocols for determining seismic performance characteristics of structural and nonstructural components through laboratory testing", Federal Emergency Management Agency, Redwood City.
|
8 |
Ghiassi, B., Soltani, M. and Tasnimi, A. (2011), "Seismic evaluation of masonry structures strengthened with reinforced concrete layers", J. Struct. Eng., 138(6), 729-743. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000513.
DOI
|
9 |
Hung, C. and Chen, Y. (2016), "Innovative ECC jacketing for retrofitting shear-deficient RC members", Construct. Build. Mat., 111(15), 408-418. https://doi.org/10.1016/j.conbuildmrat.2016.02.077.
DOI
|
10 |
Ismail, N., El-Maaddawy, T. and Khattak, N. (2018), "Quasi-static in-plane testing of FRCM strengthened non-ductile reinforced concrete frames with masonry infills", Construction and building materials, 186, 1286-1298.
DOI
|
11 |
ISO-16670:2003 (2003), "Timber structures - joints made with mechanical fasteners - quasi-static reversed cyclic test method", ISO 14443, International Organization for Standardization Geneva, Switzerland.
|
12 |
JSCE2008 (2008), "Recommendation for design and construction of high performance fiber reinforced cement composites with multiple fine cracks", Jpn. Soc. Civ. Eng.
|
13 |
Kadam, S., Singh, Y. and Li, B. (2014), "Strengthening of unreinforced masonry using welded wire mesh and micro-concrete-Behaviour under in-plane action", Construct. Build. Mat., 54(15), 247-257. https://doi.org/10.1016/j.conbuildmat.2013.12.033.
DOI
|
14 |
Kesner, K. and Billington, S.L. (2004), "Tension, compression and cyclic testing of engineered cementitious composite materials", MCEER.
|
15 |
Kota, S.K., Rama, J.S. and Murthy, A.R. (2019), "Strengthening RC frames subjected to lateral load with Ultra High-Performance fiber reinforced concrete using damage plasticity model", Earthq. Struct., 17(2), 221-232. https://doi.org/10.12989/eas.2019.17.2.221.
DOI
|
16 |
Krawinkler, H. (2009), "Loading histories for cyclic tests in support of performance assessment of structural components", In the 3rd International Conference on Advances in Experimental Structural Engineering, San Francisco. U.S.A.
|
17 |
Kyriakides, M.A. and Billington, S.L. (2014), "Behavior of unreinforced masonry prisms and beams retrofitted with engineered cementitious composites", Mat. Struct., 47(9), 1573-1587. https://doi.org/10.1617/s11527-013-0138-x.
DOI
|
18 |
Liang, X. and Xing, P. (2018), "Seismic behavior of fiber reinforced cementitious composites coupling beams with conventional reinforcement", Earthq. Struct., 14(3), 261-271. https://doi.org/10.12989/eas.2018.14.3.261.
DOI
|
19 |
Lin, Y., Lawley, D., Wotherspoon, L. and Ingham, J. (2016), "Out-of-plane testing of unreinforced masonry walls strengthened using ECC shotcrete", Struct., 7, 33-42. https://doi.org/10.1016/j.istruc.2016.04.005.
DOI
|
20 |
ACI/440.7R. (2010), "Guide for the design and construction of externally bonded fiber-reinforced polymer systems for strengthening un-reinforced masonry structures", American concrete institute (ACI).
|
21 |
AL-Gemeel, A. and Zhuge, Y. (2018), "Experimental investigation of textile reinforced engineered cementitious composite (ECC) for square concrete column confinement", Construct. Build. Mat., 174(20), 594-602. https://doi.org/10.1016/j.conbuildmat.2018.04.161.
DOI
|
22 |
ASCE/41-17 (2017), "Seismic evaluation and retrofit of existing buildings", Reston, Virginia, 20191-4382: American Society of Civil Engineers.
|
23 |
ASTM-C1314-16 (2016), "Standard test method for compressive strength of masonry prisms", West Conshohocken.
|
24 |
ASTM-C270-07 (2007), "Standard specification for mortar for unit masonry", West Conshohocken.
|
25 |
ASTM-C469-14 (2002), "Standard test method for static modulus of elasticity and poisson's ratio of concrete in compression", West Conshohocken.
|
26 |
ASTM-C67-14 (2014), "Standard test methods for sampling and testing brick and structural clay tile", West Conshohocken.
|
27 |
ATC 24 (1992), "Guidelines for cyclic seismic testing of components of steel structures", Applied Technology Council, Redwood City.
|
28 |
Basilio, I., Fedele, R., Lourenco, P.B. and Milani, G. (2014), "Assessment of curved FRP-reinforced masonry prisms: experiments and modeling", Construct. Build. Mat., 51, 492-505. https://doi.org/10.1016/j.conbuildmat.2013.11.011.
DOI
|
29 |
Bernat-Maso, E., Gil, L. and Roca, P. (2015), "Numerical analysis of the load-bearing capacity of brick masonry walls strengthened with textile reinforced mortar and subjected to eccentric compressive loading", Eng. Struct., 91, 96-111. https://doi.org/10.1016/j.engstruct.2015.02.032.
DOI
|
30 |
Lin, Y., Wotherspoon, L., Scott, A. and Ingham, J. (2014), "In-plane strengthening of clay brick unreinforced masonry wallettes using ECC shotcrete", Eng. Struct., 66(1), 57-65. https://doi.org/10.1016/j.engstruct.2014.01.043.
DOI
|
31 |
Lourenco, P.J. (1997), "Computational strategies for masonry structures", Master Thesis, Delft University of Technology, Portugal.
|
32 |
Luccioni, B. and Rougier, V. (2011), "In-plane retrofitting of masonry panels with fibre reinforced composite materials", Construct. Build. Mat., 25(4), 1772-1788. https://doi.org/10.1016/j.conbuildmat.2010.11.088.
DOI
|
33 |
Maalej, M. and Leong, K. (2005), "Engineered cementitious composites for effective FRP-strengthening of RC beams", Compos. Sci. Technol., 65(7-8), 1120-8. https://doi.org/10.1016/j.compscitech.2004.11.007.
DOI
|
34 |
Maalej, M., Lin, V., Nguyen, M. and Quek, S. (2010), "Engineered cementitious composites for effective strengthening of unreinforced masonry walls", Eng. Struct., 32(8), 2432-2439. https://doi.org/10.1016/j.engstruct.2010.04.017.
DOI
|
35 |
Maso, E.B., Escrig, C., Chrysl, A.A. and Lluis, G. (2014), "Experimental assessment of textile reinforced sprayed mortar strengthening system for brickwork wallettes", Construct. Build. Mat., 50, 226-236. https://doi.org/10.1016/j.conbuildmat.2013.09.031.
DOI
|
36 |
Milani, G., Milani, E. and Tralli, A. (2009), "Upper Bound limit analysis model for FRP-reinforced masonry curved structures. Part I: Unreinforced masonry failure surfaces", Comput. Struct., 87(23-24), 1516-1533. https://doi.org/10.1016/j.compstruc.r2009.07.007.
DOI
|
37 |
Nezhad, R., Kabir, M. and Banazadeh, M. (2016), "Shaking table test of fibre reinforced masonry walls under out-of-plane loading", Construct. Build. Mat., 120, 89-103. https://doi.org/10.1016/j.conbuildmat.2016.05.097.
DOI
|
38 |
Popa, V., Pascu, R., Papurcu, A. and Albota, E. (2016), "Retrofitting of squat masonry walls by FRP grids bonded by cement-based mortar", Earthq. Struct., 10(1), 125-139. https://doi.org/10.12989/eas.2016.10.1.125.
DOI
|
39 |
Singh, S., Patil, R. and Munjal, P. (2017), "Study of flexural response of engineered cementitious composite faced masonry structures", Eng. Struct., 150(1), 786-802. https://doi.org/10.1016/j.engstruct.2017.07.089.
DOI
|
40 |
Triantafillou, T. (2011), "Innovative textile-based composites for strengthening and seismic retrofitting of concrete and masonry structures", In Advances in FRP composites in civil engineering; springer, Berlin, Heidelberg, 3-12.
|
41 |
Ural, A. (2013), "19th May 2011 Simav (Kutahya) earthquake and response of masonry Halil Aga Mosque", Earthq. Struct., 4(6), 671-683. https://doi.org/10.12989/eas.2013.4.6.671.
DOI
|
42 |
Vanin, A. and Foraboschi, P. (2012), "In-plane behavior of perforated brick masonry walls", Mat. Struct., 45(7), 1019-1034. https://doi.org/10.1617/s11527-011-9814-x.
DOI
|
43 |
Yardim, Y. and Lalaj, O. (2016), "Shear strengthening of unreinforced masonry wall with different fiber reinforced mortar jacketing", Construct. Build. Mat., 102, 149-154. https://doi.org/10.1016/j.conbuildmat.2015.10.095.
DOI
|
44 |
Bilgin, H. and Huta, E. (2018), "Earthquake performance assessment of low and mid-rise buildings: Emphasis on URM buildings in Albania", Earthq. Struct., 14(6), 599-614. https://doi.org/10.12989/eas.2018.14.6.000.
DOI
|
45 |
Bolhassani, M., Hamid, A., Lau, A. and Moon, F. (2015), "Simplified micro modeling of partially grouted masonry assemblages", Construct. Build. Mat., 83, 159-73. https://doi.org/10.1016/j.conbuildmat.2015.03.021.
DOI
|
46 |
Carozzi, F., Milani, G. and Poggi, C. (2014), "Mechanical properties and numerical modeling of Fabric Reinforced Cementitious Matrix (FRCM) systems for strengthening of masonry structures", Compos. Struct., 107, 711-725. https://doi.org/10.1016/j.compstruct.2013.08.026.
DOI
|
47 |
Carozzi, F.G., Poggi, C., Bertolesi, E. and Milani, G. (2018), "Ancient masonry arches and vaults strengthened with TRM, SRG and FRP composites: Experimental evaluation", Compos. Struct., 187(1), 466-480. https://doi.org/10.1016/j.compstruct.2017.12.075.
DOI
|
48 |
Darbhanzi, A., Marefat, M.S., Khanmohammadi, M., Moradimanesh, A. and Zare, H. (2018), "Seismic performance of retrofitted URM walls with diagonal and vertical steel strips", Earthq. Struct., 14(5), 449-458. https://doi.org/10.12989/eas.2018.14.5.449.
DOI
|
49 |
Dehghani, A., Fischer, G. and Alahi, F.N. (2015), "Strengthening masonry infill panels using engineered cementitious composites", Mat. Struct., 48(1-2), 185-204. https://doi.org/10.1617/s11527-013-0176-4.
DOI
|
50 |
Deng, M. and Yang, S. (2018), "Cyclic testing of unreinforced masonry walls retrofitted with engineered cementitious composites", Construct. Build. Mat., 177, 395-408. https://doi.org/10.1016/j.conbuildmat.2018.05.132.
DOI
|
51 |
Bertolesi, E., Carozzi, F.G., Milani, G. and Poggi, C. (2014), "Numerical modeling of Fabric Reinforce Cementitious Matrix composites (FRCM) in tension", Construct. Build. Mat., 70, 531-548. https://doi.org/10.1016/j.conbuildmat.2014.08.006.
DOI
|