1 |
Akbas, B., Shen, J. and Hao, H. (2001), "Energy approach in performance-based seismic design of steel moment resisting frames for basic safety objective", Struct. Des. Tall Build., 10(3), 193-217.
DOI
|
2 |
Akbas, B., Shen, J. and Temiz, H. (2006), "Identifying the hysteretic energy demand and distribution in regular steel frames", Steel Compos. Struct., 6(6), 479-491.
DOI
|
3 |
Akbas, B., Tugsal, U.M. and Kara, F.I. (2009), "An evaluation of energy response and cumulative plastic rotation demand in steel moment resisting frames through dynamic/static pushover analyses", Struct. Des. Tall Spec. Build., 18(4), 405-426.
DOI
|
4 |
Akiyama, H. (1985), Earthquake-Resistant Limit-State Design for Buildings, University of Tokyo Press, Tokyo, Japan.
|
5 |
Housner, G.W. (1956), "Limit design of structures to resist earthquakes", Proceedings of the 1st World Conference on Earthquake Engineering, Oakland, California, USA.
|
6 |
IBC 2006 (2006), International Building Code, International Code Council, Country Club Hills, Illinois, USA.
|
7 |
Arias, A. (1970), A Measure of Earthquake Intensity in Seismic Design for Nuclear Power Plants, The MIT Press, Cambridge, Massachusetts.
|
8 |
Lee, S.S. and Goel, S.C. (2001), "Performance based design of steel moment frames using target drift and yield mechanism", Research Report (UMCEE 01-17), The University of Michigan, Department of Civil and Environmental Engineering.
|
9 |
Khashaee, P. (2004), "Energy-based seismic design and damage assessment for structures", Ph.D. Dissertation, Southern Methodist University, Dallas, Texas.
|
10 |
Kuwamura, H. and Galambos, T.V. (1989), "Earthquake load for structural reliability", J. Struct. Eng., 115(6), 1446-1462.
DOI
|
11 |
Leelataviwat, S., Goel, S.C. and Stojadinovic, B. (2002), "Energybased seismic design of structures using yield mechanism and target drift", J. Struct. Eng., 128(8), 1046-1054.
DOI
|
12 |
Liao, W.C. (2010), "Performance-based plastic design of earthquake resistant reinforced concrete moment frames", Ph.D. Dissertation, University of Michigan, Ann Arbor, USA.
|
13 |
Lopez-Almansa, F., Yazgan, A.U. and Benavent-Climent, A. (2013), "Design energy input spectra for high seismicity regions based on Turkish registers", Bull. Earthq. Eng., 11(4), 885-912.
DOI
|
14 |
Manfredi, G. (2001), "Evaluation of seismic energy demand", Earthq. Eng. Struct. Dyn., 30(4), 485-499.
DOI
|
15 |
Merter, O. and Ucar, T. (2017), "Energy-based design base shear for RC frames considering global failure mechanism and reduced hysteretic behavior", Struct. Eng. Mech., 63(1), 23-35.
DOI
|
16 |
Bojorquez, E., Teran-Gilmore, A., Ruiz, S.E. and Reyes-Salazar, A. (2011), "Evaluation of structural reliability of steel frames: Interstory drift versus plastic hysteretic energy", Earthq. Spectra, 27(3), 661-682.
DOI
|
17 |
ASCE (2010), Minimum Design Loads for Buildings and Other Structures, ASCE/SEI Standard 7-10; USA.
|
18 |
ATC (1996), Seismic Evaluation and Retrofit of Concrete Buildings, ATC-40: Applied Technology Council, Redwood City, CA, USA.
|
19 |
Benavent-Climent, A., Pujades, L.G. and Lopez-Almansa, F. (2002), "Design energy input spectra for moderate seismicity regions", Earthq. Eng. Struct. Dyn., 31, 1151-1172.
DOI
|
20 |
BSSC (2009), National Earthquake Hazards Reduction Program Recommended Seismic Provisions for New Buildings and Other Structures, Part 1: Provisions, Building Seismic Safety Council, Federal Emergency Management Agency (FEMA P-750), Washington, D.C.
|
21 |
Canadian Commission on Building and Fire Code (1995), National Building Code of Canada, National Research Council of Canada, Ottawa, Ontario.
|
22 |
CEN (2004), Eurocode 8: Design of Structures for Earthquake Resistance - Part 1: General Rules, Seismic Actions and Rules for Buildings, European Committee for Standardization, Brussels, Belgium.
|
23 |
Chopra, A.K. (1995), Dynamics of Structures, Theory and Applications to Earthquake Engineering, Prentice Hall, Upper Saddle River, N.J.
|
24 |
Decanini, L.D. and Mollaioli, F. (1998), "Formulation of elastic earthquake input energy spectra", Earthq. Eng. Struct. Dyn., 27, 1503-1522.
DOI
|
25 |
PEER (2018), Pacific Earthquake Engineering Research Center Strong Ground Motion Database, http://ngawest2.berkeley.edu/.
|
26 |
Mezgebo, M. and Lui, E.M. (2016), "Hysteresis and soil site dependent input and hysteretic energy spectra for far-source ground motions", Adv. Civil Eng., 2016, 1-29.
DOI
|
27 |
Dindar, A.A., Yalcin, C., Yuksel, E., Ozkaynak, H. and Buyukozturk, O. (2015), "Development of earthquake energy demand spectra", Earthq. Spectra, 31(3), 1667-1689.
DOI
|
28 |
Mezgebo, M.G. (2015), "Estimation of earthquake input energy, hysteretic energy and its distribution in MDOF structures", Ph.D. Dissertation, Syracuse University, New York.
|
29 |
Ozsarac, V., Karimzadeh, S., Erberik, M.A. and Askan, A. (2017), "Energy-based response of simple structural systems by using simulated ground motions", Procedia Eng., 199, 236-241.
DOI
|
30 |
Park, Y. and Ang, A. (1985), "Mechanistic seismic damage model for reinforced concrete", J. Struct. Eng., 111(4), 722-739.
DOI
|
31 |
PRISM for Earthquake Engineering (2011), A Software for Seismic Response Analysis of Single-Degree-of Freedom Systems, Department of Architectural Engineering, INHA University.
|
32 |
Riddell, R. and Garcia, J.E. (2001), "Hysteretic energy spectrum and damage control", Earthq. Eng. Struct. Dyn., 30, 1791-1816.
DOI
|
33 |
Taflampas, I.M., Maniatakis, C.A. and Spyrakos, C.C. (2008), "Estimation of input seismic energy by means of a new definition of strong motion duration", The 14th World Conference on Earthquake Engineering, Beijing, China.
|
34 |
TBEC (2018), Turkish Building Earthquake Code, The Disaster and Emergency Management Presidency of Turkey, 18th of March of Official Gazette, Ankara, Turkey.
|
35 |
Trifunac, M.D. and Brady, A.G. (1975), "A Study on the duration of strong earthquake ground motion", Bull. Seismol. Soc. Am., 65, 581-626.
|
36 |
TSDC (2007), Turkish Seismic Design Code, Ministry of Public Works and Settlement, Ankara, Turkey
|
37 |
Fajfar, P. and Fischinger, M.A. (1990), "Seismic procedure including energy concept", Ninth European Conference on Earthquake Engineering (ECEE), Moscow.
|
38 |
Akbas, B. (1997), "Energy-based earthquake resistant design of steel moment resisting frames", Ph.D. Dissertation, Graduate College of Illionis Institute of Technology, Illinois.
|
39 |
Akbas, B. and Shen, J. (2003), "Earthquake-resistant design (EQRD) and energy concepts", Tech. J., 192, 2877-2901. (in Turkish)
|
40 |
Enderami, S.A., Beheshti-Aval, S.B. and Saadeghvaziri, M.A. (2014), "New energy-based approach to predict seismic demands of steel moment resisting frames subjected to nearfault ground motions", Eng. Struct., 72, 182-192.
DOI
|
41 |
Fajfar, P. and Vidic, T., (1994), "Consistent inelastic design spectra: hysteretic and input energy", Earthq. Eng. Struct. Dyn., 23, 523-537.
DOI
|
42 |
Fajfar, P., Vidic, T. and Fischinger, M. (1989), "Seismic demand in medium- and long-period structures", Earthq. Eng. Struct. Dyn., 18(8), 1133-1144.
DOI
|
43 |
FEMA 440 (2005), Improvement of Nonlinear Static Seismic Analysis Procedures, Federal Emergency Management Agency, Washington, D.C.
|
44 |
Gullu, A., Yuksel, E. and Yalcin, C. (2018), "Seismic energy based design: numerical evaluation of diverse MDOF systems", Proceedings of the 16th European Conference on Earthquake Engineering, Thessaloniki.
|
45 |
Gullu, A., Yuksel, E., Yalcin, C., Dindar, A.A. and Ozkaynak, H. (2017), "Experimental verification of the elastic input energy spectrum and a suggestion", Proceedings of the Interdisciplinary Perspectives for Future Building Envelopes, Istanbul, Turkey, May.
|
46 |
Zahrah, T.F. and Hall, W.J. (1984), "Earthquake energy absorption in SDOF Structures", J. Struct. Eng., 110, 1757-1773.
DOI
|
47 |
Uang, C.M. and Bertero, V.V. (1990), "Evaluation of seismic energy in structures", Earthq. Eng. Struct. Dyn., 19(1), 77-90.
DOI
|
48 |
UBC (1997), Uniform Building Code, International Conference of Building Officials, Whittier, California, USA.
|
49 |
Ucar, T., Merter, O. and Duzgun, M. (2012), "A study on determination of target displacement of RC frames using PSV spectrum and energy-balance concept", Struct. Eng. Mech., 41(6), 759-773.
DOI
|