1 |
Filippou, F.C., D'Ambrisi, A. and Issa, A. (1992), "Nonlinear static and dynamic analysis of reinforced concrete subassemblages", Report No. UCB/EERC-92/08, Earthquake Engineering Research Center.
|
2 |
Filippou, F.C., Popov, E.P. and Bertero, V.V. (1983), "Effects of bond deterioration on hysteretic behavior of reinforced concrete joints", Report No. UCB/EERC-83/19, Earthquake Engineering Research Center.
|
3 |
Ghobarah, A. and Biddah, A. (1999), "Dynamic analysis of reinforced concrete frames including joint shear deformation", Eng. Struct., 21(11), 971-87.
DOI
|
4 |
Gu, Q., Barbato, M., Conte, J.P., Gill, P.E. and McKenna, F. (2011), "OpenSees-SNOPT framework for finite-element-based optimization of structural and geotechnical systems", J. Struct. Eng., 138(6), 822-834.
|
5 |
Habibi, A. and Moharrami, H. (2010), "Nonlinear sensitivity analysis of reinforced concrete frames", Finite Elem. Anal. Des., 46(7), 571-584.
DOI
|
6 |
Habibi, A.R. (2008), "Optimal seismic performance based design of 2D reinforced concrete frames", Ph.D. Thesis, Tarbiat Modarres Univ., Tehran, Iran.
|
7 |
Habibi, A.R. and Izadpanah, M. (2012), "New method for the design of reinforced concrete moment resisting frames with damage control", Scientia Iranica, 19(2), 234-241.
DOI
|
8 |
He, R. and Zhong, H. (2012), "Large deflection elasto-plastic analysis of frames using the weak-form quadrature element method", Finite Elem. Anal. Des., 50, 125-133.
DOI
|
9 |
Ismail, R. and Zamahidi, N.F. (2015), "An evaluation of high-rise concrete building performance under low intensity earthquake effects", InCIEC 2014, 79-86.
|
10 |
Inel, M. and Ozmen, H.B. (2006), "Effects of plastic hinge properties in nonlinear analysis of reinforced concrete buildings", Eng. Struct., 28(11), 1494-1502.
DOI
|
11 |
Izadpanah, M. and Habibi, A. (2015), "Evaluating the spread plasticity model of IDARC for inelastic analysis of reinforced concrete frames", Struct. Eng. Mech., 56(2), 169-188.
DOI
|
12 |
Izadpanah, M. and Habibi, A.R. (2018), "New spread plasticity model for reinforced concrete structural elements accounting for both gravity and lateral load effects", J. Struct. Eng., 144(5), 04018028.
DOI
|
13 |
Kitayama, K., Otani, S. and Aoyama, H. (1987), "Earthquake resistant design criteria for reinforced concrete interior beamcolumn joints", Proceedings of the Pacific Conference on Earthquake Engineering, Wairakei, New Zealand.
|
14 |
Izadpanah. M. (2017), "A new plasticity model for beam-column element to take into account the influence of lateral and gravity loads", Ph.D. Thesis, Structural Engineering, University of Kurdistan.
|
15 |
Izzuddin, B.A., Karayannis, C.G. and Elnashai, A.S. (1994), "Advanced nonlinear formulation for reinforced concrete beamcolumns", J. Struct. Eng., 120(10), 2913-2934
DOI
|
16 |
Kim, S.P. and Kurama, Y.C. (2008), "An alternative pushover analysis procedure to estimate seismic displacement demands", Eng. Struct.. 30(12), 3793-3807.
DOI
|
17 |
Kunnath, S.K. and Reinhorn, A.M. (1989), "Inelastic threedimensional response analysis of reinforced 676 concrete building structures (IDARC-3D)", National Center for Earthquake Engineering Research, State 677 University of New York at Buffalo.
|
18 |
Lee, H.S. and Woo, S.W. (2002), "Seismic performance of a 3-story RC frame in a low-seismicity region", Eng. Struct., 24(6), 719-734.
DOI
|
19 |
Kwak, H.G. and Kim, S.P. (2010), "Simplified monotonic moment-curvature relation considering fixed-end rotation and axial force effect", Eng. Struct., 32, 69-79.
DOI
|
20 |
Lee, C.L. and Filippou, F.C. (2009), "Efficient beam-column element with variable inelastic end zones", J. Struct. Eng., 135(11), 1310-1319.
DOI
|
21 |
Lowes, L.N. and Altoontash, A. (2003), "Modeling reinforcedconcrete beam-column joints subjected to cyclic load", J. Struct. Eng., 129(12), 1686-97.
DOI
|
22 |
Mashaly, E., El-Heweity, M., Abou-Elfath, H. and Osman, M. (2011), "Finite element analysis of beam-to-column joints in steel frames under cyclic loading", Alexandria Eng. J., 50(1), 91-104.
DOI
|
23 |
Monti, G., Filippou, F.C. and Spacone, E. (1997), "Finite element for anchored bars under cyclic load reversals", J. Struct. Eng., 123(5), 614-23.
DOI
|
24 |
Masi, A., Santarsiero, G., Lignola, G.P. and Verderame, G.M. (2013), "Study of the seismic behavior of external RC beamcolumn joints through experimental tests and numerical simulations", Eng. Struct., 52, 207-219.
DOI
|
25 |
Mazza, F. (2014), "A distributed plasticity model to simulate the biaxial behaviour in the nonlinear analysis of spatial framed structures", Comput. Struct., 135, 141-154.
DOI
|
26 |
Mazzoni, S., McKenna, F., Scott, M.H. and Fenves, G.L. (2006), OpenSees Command Language Manual.
|
27 |
Mergos, P.E and Kappos, A.J. (2012), "A gradual spread inelasticity model for R/C beamcolumns, accounting for flexure, shear and anchorage slip", Eng. Struct., 44, 94-106.
DOI
|
28 |
Mitra, N. and Lowes, L.N. (2007), "Evaluation, calibration, and verification of a reinforced concrete beam-column joint", J. Struct. Eng., 133(1), 105-120.
DOI
|
29 |
Nguyen, P.C. and Kim, S.E. (2014), "Distributed plasticity approach for time-history analysis of steel frames including nonlinear connections", J. Constr. Steel Res., 100, 36-49.
DOI
|
30 |
Pan, W.H., Tao, M.X. and Nie, J.G. (2016), "Fiber beam-column element model considering reinforcement anchorage slip in the footing", Bull. Earthq. Eng., 15(3), 991-1018.
|
31 |
Park, R. and Ruitong, D. (1998), "A comparison of the behavior of reinforced concrete beam column joints designed for ductility and limited ductility", Bull. NZ. Nat. Soc. Earthq. Eng., 21(4), 255-278.
|
32 |
Paulay, T. and Scarpas, A. (1981), "The behaviour of exterior beam-column joints", Bull. NZ. Nat. Soc. Earthq. Eng., 14(3), 131-144
|
33 |
Scott, M.H. and Fenves, G.L. (2006), "Plastic hinge integration methods for force-based beam-column elements", J. Struct. Eng., 132(2), 244-252.
DOI
|
34 |
Paultre, P., Castele, D., Rattray, S. and Mitchell, D. (1989), "Seismic response of reinforced concrete frame subassemblages - a Canadian code perspective", Can. J. Civil Eng., 16, 627-649.
DOI
|
35 |
Rahai, A.R. and Nafari, S.F. (2013), "A comparison between lumped and distributed plasticity approaches in the pushover analysis results of a pc frame bridge", Int. J. Civil Eng., 11(4), 217-225.
|
36 |
Reinhorn, A.M., Roh, H., Sivaselvan, M., Kunnath, S.K., Valles, R.E., Madan, A., Li, C., Lobo, R. and Park, Y.J. (2009), "IDARC 2D Version 7.0: A Program for the Inelastic Damage Analysis of Structures", MCEER Technical Report- MCEER-09-0006, University at Buffalo-the State University of New York.
|
37 |
Roh, H., Reinhorn, A.M. and Lee, J.S. (2012), "Power spread plasticity model for inelastic analysis of reinforced concrete structures", Eng. Struct., 39, 148-161.
DOI
|
38 |
Russo, G., Zingone, G. and Romano, F. (1990), "Analytical solution for bond-slip of reinforced bars in R.C. joints", J. Struct. Eng., 116(2), 336-355.
DOI
|
39 |
Scott, M.H., Fenves, G.L., McKenna, F. and Filippou, F.C. (2008), "Software patterns for nonlinear beam-column models", J. Struct. Eng., 134(4), 562-571.
DOI
|
40 |
Sezen, H. and Moehle, J.P. (2003), "Bond-slip behavior of reinforced concrete members", Fib-Symposium (CEB-FIP)-Concrete Structures in Seismic Regions, Athens, Greece.
|
41 |
Sezen, H. and Setzler, E.J. (2008), "Reinforcement slip in reinforced concrete columns", ACI Struct. J., 105(3), 280-289.
|
42 |
Shafaei, J., Zareian, M.S., Hosseini, A. and Marefat, M.S. (2014), "Effects of joint flexibility on lateral response of reinforced concrete frames", J. Struct. Eng., 81, 412-431.
DOI
|
43 |
Walker, S.G. (2001), "Seismic performance of existing reinforced concrete beam-column joints", Doctoral Dissertation, University of Washington.
|
44 |
Sivaselvan, M.V. and Reinhorn, A.M. (2000), "Hysteretic models for deteriorating inelastic structures", J. Eng. Mech., 126(6), 633-640.
DOI
|
45 |
Sun, X.J., Cao, J.P. and Zheng, W.Z. (2011), "Seismic elasticplastic analysis on Outer-Jacketing mega frame for story-adding by IDARC-2D", Adv. Mater. Res., 255, 209-214.
|
46 |
Tsonos, A.D.G. (2010), "Performance enhancement of R/C building columns and beam-column joints through shotcrete jacketing", Eng. Struct., 32(3), 726-740.
DOI
|
47 |
Tsonos, A.G. (2007), "Cyclic load behavior of reinforced concrete beam-column subassemblages of modern structures", ACI Struct. J., 104(4), 468-475.
|
48 |
Tsonos, A.G. (2008), "Effectiveness of CFRP-jackets and RCjackets in post-earthquake and pre-earthquake retrofitting of beam-column subassemblages", Eng. Struct., 30(3), 777-793.
DOI
|
49 |
Zhao, J. and Sritharan, S. (2007), "Modeling of strain penetration effects in fiber-based analysis of reinforced concrete structures", ACI Struct. J., 104(2), 133-141.
|
50 |
Zhao, X.M., Wu, Y.F. and Leung, A. (2012), "Analyses of plastic hinge regions in reinforced concrete beams under monotonic loading", Eng. Struct., 34, 466-482.
DOI
|
51 |
Babazadeh, A., Burgueno, R. and Silva, P.F. (2016), "Evaluation of the critical plastic region length in slender reinforced concrete bridge columns", Eng. Struct., 125, 280-293.
DOI
|
52 |
Alameddine, F. and Ehsani, M.R. (1991), "High strength RC connections subjected to inelastic cyclic loading", J. Struct. Eng., 117(3), 829-50.
DOI
|
53 |
Altoontash, A. and Deierlein, G.D. (2003), "A versatile model for beam-column joints", Proceedings of the ASCE Structures Congress, Seattle, WA.
|
54 |
Alva, G.M.S. and de Cresce, El, A.L.H. (2013), "Moment-rotation relationship of RC beam-column connections: Experimental tests and analytical model", Eng. Struct., 56, 1427-1438.
DOI
|
55 |
Amorim, D.L.D.F., Proença, S.P. and Florez-Lopez, J. (2013), "A model of fracture in reinforced concrete arches based on lumped damage mechanics", Int. J. Solid. Struct., 50(24), 4070-4079.
DOI
|
56 |
Au, F.T.K. and Bai, Z.Z. (2007), "Two-dimensional nonlinear finite element analysis of monotonically and non-reversed cyclically loaded RC beams", Eng. Struct., 29(11), 2921-2934.
DOI
|
57 |
Berry, M.P., Lehman, D.E. and Lowes, L.N. (2008), "Lumpedplasticity models for performance simulation of bridge columns", ACI Struct. J., 105(3), 270-279.
|
58 |
Birely, A.C., Lowes, L.N. and Lehman, D.E. (2012), "A model for the practical nonlinear analysis of reinforced-concrete frames including joint flexibility", Eng. Struct., 34, 455-465.
DOI
|
59 |
Burns, N.H. and Siess, C.P. (1966), "Plastic hinging in reinforced concrete", J. Struct. Div. Pr., ASCE, 92(5), 45-64.
|