1 |
Detlof, V.W., Nels, R. and Kitsuse, A. (2003), "Framing earthquake retrofitting decisions: The case of hillside homes in Loss Angeles", PEER Report 2000/03, Pacific Earthquake Engineering Research Center, University of California, Berkeley.
|
2 |
Eurocode 8 (2004), Design of Structures for Earthquake Resistance, EN 1998-1.
|
3 |
Georgoussisa, G., Tsompanosa, A. and Triantafyllos, M. (2015), "Approximate seismic analysis of multi-story buildings with mass and stiffness irregularities", Procedia Eng., 125, 959-966.
DOI
|
4 |
Goel, R.K. and Chopra, A.K. (1997), "Period formulas for moment resisting frame buildings", J. Struct. Eng., ASCE, 123(11), 1454-1461.
DOI
|
5 |
Hatzigeorgiou, G.D. and Kanapitsas, G. (2013), "Evaluation of fundamental period of low-rise and mid-rise reinforced concrete buildings", Earthq. Eng. Struct. Dyn., 42(11), 1599-1616.
DOI
|
6 |
Asteris, P.G., Repapis, C.C., Cavaleri, L., Sarhosis, V. and Athanasopoulou, A. (2015b), "On the fundamental period of infilled RC frame buildings", Struct. Eng. Mech., 54(6), 1175-1200.
DOI
|
7 |
Hideo, T., Fumiya, I. and Motohiro, M. (2011), "A simplified analysis of super building structures with setback", Earthq. Struct., 2(1), 43-64.
DOI
|
8 |
Humar, J.L. and Wright, E.W. (1977), "Earthquake response of steel framed multi-storey buildings with set-backs", Earthq. Eng. Struct. Dyn., 5(1), 15-39.
DOI
|
9 |
Karavasilis, T.L, Bazeos, N. and Beskos, D.E. (2008b), "Seismic response of plane steel MRF with setbacks: Estimation of inelastic deformation demands", J. Constr. Steel Res., 64, 644-654.
|
10 |
Aranda, G.R. (1984), "Ductility demands for R/C frames irregular in elevation", Proceedings of the 8th World Conference on Earthquakes and Engineering, San Francisco.
|
11 |
ASCE 7 (2005), Minimum Design Loads for Building and Other Structures (ASCE/SEI 7-05), American Society of Civil Eng., New York, U.S.A.
|
12 |
Asteris, P.G., Constantinos, C.R., Filippos, F., Alkis, F. and Athanasios, K.T. (2017), "Fundamental period of infilled RC frame structures with vertical irregularity", Struct. Eng. Mech., 61(5), 663-674.
DOI
|
13 |
Kumar, S. and Paul, D.K. (1998), "A simplified method for elastic seismic analysis of hill buildings", J. Earthq. Eng., 2(2), 241-266.
DOI
|
14 |
Asteris, P.G., Repapis, C., Repapi, E. and Cavaleri, L. (2016), "Fundamental period of infilled reinforced concrete frame structures", Struct. Infrastr. E., 13(7), 1-13.
|
15 |
Asteris, P.G., Repapis, C., Tsaris, A.K., Di Trapani, F. and Cavaleri, L. (2015a), "Parameters affecting the fundamental period of infilled RC frame structures", Earthq. Struct., 9(5), 999-1028.
DOI
|
16 |
Karavasilis, T.L., Bazeos, N. and Beskos, D.E. (2008a), "Estimation of seismic inelastic deformation demands in plane steel MRF with vertical mass irregularities", Eng. Struct., 30(11), 3265-3275.
DOI
|
17 |
Kenji, F. (2016), "Assessment of pushover-based method to a building with bidirectional setback", Earthq. Struct., 11(3), 421-443.
DOI
|
18 |
Khoure, W., Rutenberg, A. and Levy, R. (2005), "The seismic response of asymmetric setback perimeter-frame structures", Proceedings of the 4th European Workshop on the Seismic Behaviour of Irregular and Complex Structures, Thessaloniki, August.
|
19 |
Kumar, S. and Paul, D.K. (1999), "Hill buildings configuration from seismic consideration", J. Struct. Eng., ASCE, 26(3), 179-185.
|
20 |
Moehle, J.P. and Alarcon, L.F. (1986), "Seismic Analysis Methods for Irregular Buildings", J. Struct. Eng., ASCE, 112(1), 35-52.
DOI
|
21 |
Panagiotis, G.A., Constantinos, C.R., Filippos, F., Fotos, A. and Tsaris, A.K. (2017), "Fundamental period of infilled RC frame structures with vertical irregularity", Struct. Eng. Mech., 61(5), 663-674.
DOI
|
22 |
SAP2000 (2016), Integrated Software for Structural Analysis and Design of Structures, Computers and Structures Inc., Berkeley, CA.
|
23 |
Sarkar, P., Prasad, M. and Menon, D. (2010), "Vertical geometric irregularity in stepped building frames", Eng. Struct., 32, 2175-2182.
DOI
|
24 |
Varadharajan, S., Sehgal, V.K. and Saini, B. (2014), "Seismic response of multistory reinforced concrete frame with vertical mass and stiffness irregularities", Struct. Des. Tall Spec. Build., 23(5), 362-389.
DOI
|
25 |
Birajdar, B.G. and Nalawade, S.S. (2004), "Seismic analysis of building resting on sloping ground", Proceedings of the 13th World Conference on Earthquakes and Engineering, Vancouver, B.C., Canada, August.
|
26 |
Chopra, A.K. and Goel, R.K. (2000), "Building period formulas for estimating seismic displacements", Earthq. Spectra, 16(2), 533-536.
DOI
|
27 |
Sarkar, P., Prasad, M. and Menon, D. (2016), "Seismic evaluation of RC stepped building frames using improved pushover analysis", Earthq. Struct., 10(4), 913-938.
DOI
|
28 |
Singh, Y. and Phani, G. (2012), "Seismic behaviour of buildings located on slopes-An analytical study and some observations from sikkim earthquake of September, 2011", Proceedings of the 15th World Conference on Earthquakes and Engineering. Lisbon.
|
29 |
Surana, M., Singh, Y. and Lang, D.H. (2015), "Seismic fragility analysis of hill-buildings in Indian Himalayas", SECED Conference: Earthquake Risk and Engineering towards a Resilient World, Cambridge, July.
|
30 |
Vijayanarayanan, A.R., Goswami, R. and Murty, C.V.R. (2012), "Performance of RC buildings along hill slopes of Himalayas during 2011 sikkim earthquake", Proceedings of the 15th World Conference on Earthquakes and Engineering, Lisbon.
|
31 |
Vijayanarayanan, A.R., Goswami, R. and Murty, C.V.R. (2017), "Identifying stiffness irregularity in buildings using fundamental lateral mode shape", Earthq. Struct., 12(4), 434-448.
|
32 |
IS 1893 (Part 1) (2016), BIS: Indian Standard Criteria for Earthquake Resistant Design of Structures, Part 1 - General Provisions and Buildings (Fifth Revision), Bureau of Indian Standards, New Delhi.
|