1 |
Shukla, A.K. and Datta, T.K. (1999), "Optimal use of viscoelastic dampers in building frames for seismic response", J. Struct. Eng., 125(4), 401-409.
DOI
|
2 |
Singh, M.P. and Moreschi, L.M. (2002), "Optimal placement of dampers for passive response control", Earthq. Eng. Struct. Dyn., 31(4), 955-976.
DOI
|
3 |
Symans, M.D., Charney, F.A., Whittaker, A.S., Constantinou, M.C., Kircher, C.A., Johnson, M.W. and McNamara, R.J. (2008), "Energy dissipation systems for seismic applications: current practice and recent developments", J. Struct. Eng., 134(1), 3-21.
DOI
|
4 |
Takewaki, I. (1997), "Optimal damper placement for minimum transfer functions", Earthq. Eng. Struct. Dyn., 26(11), 1113-1124.
DOI
|
5 |
Takewaki, I. (2000), "Optimal damper placement for planar building frames using transfer functions", Struct. Multidisc. Optim., 20(4), 280-287.
DOI
|
6 |
Taylor Devices Inc. (2017), http://www.taylordevices.com.
|
7 |
Tzimas, A.S., Dimopoulos, A.I. and Karavasilis, T.L. (2015), "EC8-based seismic design and assessment of self-centering post-tensioned steel frames with viscous dampers", J. Constr. Steel Res., 105, 60-73.
DOI
|
8 |
Baker, J.W. (2007), "Quantitative classification of near-fault ground motions using wavelet analysis", Bull. Seismol. Soc. Am., 97(5), 1486-1501.
DOI
|
9 |
Champion, C. and Liel, A. (2012), "The effect of near-fault directivity on building seismic collapse risk", Earthq. Eng. Struct. Dyn., 41(10), 1391-1409.
DOI
|
10 |
Cheng, F.Y. and Pantelides, C.P. (1988), "Optimal placement of actuators for structural control", Technical Report No. NCEER-88-0037; National Center for Earthquake Engineering Research, State University of New York, Buffalo, NY, USA.
|
11 |
Coley, D.A. (1999), An Introduction to Genetic Algorithms for Scientists and Engineers, World Scientific, Singapore.
|
12 |
EC8 (2013), Design of Structures for Earthquake Resistance, Eurocode 8, European Committee for Standardization; Brussels, Belgium.
|
13 |
Apostolakis, G. and Dargush, G.F. (2010), "Optimal seismic design of moment-resisting steel frames with hysteretic passive devices", Earthq. Eng. Struct. Dyn., 39, 355-376.
|
14 |
Ashour, S.A. and Hanson, R.D. (1987), "Elastic seismic response of buildings with supplemental damping", Report No. UMCE 87-01, Department of Civil Engineering, University of Michigan, Ann Arbor, MI, USA.
|
15 |
FEMA P695 (2008), Quantification of Building Seismic Performance Factors, ATC-63 Project, Applied Technology Council, Redwood City, CA, USA.
|
16 |
Gluck, N., Reinhorn, A.M., Gluck, J. and Levy, R. (1996), "Design of supplemental dampers for control of structures", J. Struct. Eng., 122(12), 1394-1399.
DOI
|
17 |
Hoffman, E.W. and Richards, P.W. (2014), "Efficiently implementing genetic optimization with nonlinear response history analysis of taller buildings", J. Struct. Eng., 140(8), A4014011.
DOI
|
18 |
Holland, J.H. (1992), Adaptation in Natural and Artificial Systems, MIT Press, Cambridge, MA, USA.
|
19 |
Krawinkler, H. (1978), "Shear in beam-column joints in seismic design of frames", Eng. J., 15(2), 82-91.
|
20 |
Lavan, O. and Levy, R. (2009), "Simple iterative use of Lyapunov's solution for the linear optimal seismic design of passive devices in framed buildings", J. Earthq. Eng., 13(5), 650-666.
DOI
|
21 |
Lopez-Garcia, D. (2001), "A simple method for the design of optimal damper configurations in MDOF structures", Earthq. Spectra, 17(3), 387-398.
DOI
|
22 |
Levy, R. and Lavan, O. (2006), "Fully stressed design of passive controllers in framed structures for seismic loadings", Struct. Multidisc. Optim., 32(6), 485-498.
DOI
|
23 |
Lignos, D.G. and Krawinkler, H. (2011), "Deterioration modeling of steel components in support of collapse prediction of steel moment frames under earthquake loading", J. Struct. Eng., 137(11), 1291-1302.
DOI
|
24 |
Lignos, D.G., Krawinkler, H. and Whittaker, A.S. (2011), "Prediction and validation of sidesway collapse of two scale models of a 4-story steel moment frame", Earthq. Eng. Struct. Dyn., 40(7), 807-825.
DOI
|
25 |
Newell, J. and Uang, C.M. (2006), "Cyclic behavior of steel columns with combined high axial load and drift demand", Report No. SSRP-06/22, Department of Structural Engineering, University of California, San Diego, CA, USA.
|
26 |
Zhang, R.H. and Soong, T.T. (1992), "Seismic design of viscoelastic dampers for structural applications", J. Struct. Eng., 118(5), 1375-1392.
DOI
|
27 |
Vamvatsikos, D. and Cornell, C.A. (2002), "Incremental dynamic analysis", Earthq. Eng. Struct. Dyn., 31(3), 491-514.
DOI
|
28 |
Whittle, J.K., Williams, M.S., Karavasilis, T.L. and Blakeborough, A. (2012), "A comparison of viscous damper placement methods for improving seismic building design", J. Earthq. Eng., 16(4), 540-560.
DOI
|
29 |
MATLAB (2014), Global Optimization Toolbox Release 2014b, The MathWorks, Natick, MA, USA.
|
30 |
Miyamoto, H.K., Gilani, A.S.J., Wada, A. and Ariyaratana, C. (2010), "Limit states and failure mechanisms of viscous dampers and the implications for large earthquakes", Earthq. Eng. Struct. Dyn., 39(11), 1279-1297.
DOI
|
31 |
OpenSees (2016), Open System for Earthquake Engineering Simulation, Pacific Earthquake Engineering Research Center, University of California at Berkeley, Berkeley, CA, USA.
|
32 |
Pacific Earthquake Engineering Research Center (PEER), NGA Database, http://peer.berkeley.edu/nga.
|
33 |
Paola, M.D., Mendola, L.L. and Navarra, G. (2007), "Stochastic seismic analysis of structures with nonlinear viscous dampers", J. Struct. Eng., 133(10), 1475-1478.
DOI
|
34 |
Ramirez, O.M., Constantinou, M.C., Gomez, J.D., Whittaker, A.S. and Chrysostomou, C.Z. (2002), "Evaluation of simplified methods of analysis of yielding structures with damping systems", Earthq. Spectra, 18(3), 501-530.
DOI
|
35 |
Ramirez, O.M., Constantinou, M.C., Whittaker, A.S., Kircher C.A. and Chrysostomou C.Z. (2002), "Elastic and inelastic seismic response of buildings with damping systems", Earthq. Spectra, 18(3), 531-547.
DOI
|
36 |
Seleemah, A.A. and Constantinou, M.C. (1997), "Investigation of seismic response of buildings with linear and nonlinear fluid viscous dampers", Technical Report No. NCEER-97-0004, National Center for Earthquake Engineering Research, State University of New York at Buffalo, Buffalo, NY, USA.
|