Browse > Article
http://dx.doi.org/10.12989/eas.2017.12.1.091

Necessity and adequacy of near-source factors for seismically isolated buildings  

Saifullah, Muhammad Khalid (Department of Civil Engineering, Istanbul University)
Alhan, Cenk (Department of Civil Engineering, Istanbul University)
Publication Information
Earthquakes and Structures / v.12, no.1, 2017 , pp. 91-108 More about this Journal
Abstract
Superstructures and isolation systems of seismically isolated buildings located close to active faults may observe increased seismic demands resulting from long-period and high-amplitude velocity and displacement pulses existent in near-fault ground motions as their fundamental periods may be close to or coincident with these near-fault pulse periods. In order to take these effects into account, the 1997 Uniform Building Code (UBC97) has specified near-source factors that scale up the design spectrum depending on the closest distance to the fault, the soil type at the site, and the properties of the seismic source. Although UBC97 has been superseded by the 2015 International Building Code in the U.S.A., UBC97 near-source factors are still frequently referred in the design of seismically isolated buildings around the world. Therefore it is deemed necessary and thus set as the aim of this study to assess the necessity and the adequacy of near-source factors for seismically isolated buildings. Benchmark buildings of different heights with isolation systems of different properties are used in comparing seismic responses obtained via time history analyses using a large number of historical earthquakes with those obtained from spectral analyses using the amplified spectrums established through UBC97 near-source factors. Results show that near-source factors are necessary but inadequate for superstructure responses and somewhat unconservative for base displacement response.
Keywords
near-source factors; seismically isolated buildings; time history analysis; response spectrum analysis;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Iranian Code of Practice for Seismic Resistant Design of Buildings (2007), Standard No. 2800, Third Edition, Publication No. S-465, Permanent Committee for Revising the Iranian Code of Practice for Seismic Resistant Design of Buildings.
2 Jangid, R.S. and Kelly, J.M. (2001), "Base isolation for near-fault motions", Earthq. Eng. Struct. Dyn., 30(5), 691-707.   DOI
3 Kani, N. (2011), "Recent Trends of Seismically Isolated Structures in Japan", The Japan Society for Seismic Isolation, Tokyo, Japan.
4 Kelly, J.M. (1999), "The role of damping in seismic isolation", Earthq. Eng. Struct. Dyn., 28(1), 3-20.   DOI
5 Komuro, T., Nishikawa, Y., Kimura, Y. and Isshiki, Y. (2005), "Development and realization of base isolation system for highrise buildings", J. Adv. Concrete Technol., 3(2), 233-239.   DOI
6 Lu, L.-Y., Lin, C.-C. and Lin, G.-L. (2013), "Experimental evaluation of supplemental viscous damping for a sliding isolation system under pulse-like base excitations", J. Sound Vib., 332(8), 1982-1999.   DOI
7 Lu, X., Wang, D. and Wang, S. (2016), "Investigation of the seismic response of high-rise buildings supported on tensionresistant elastomeric isolation bearings", Earthq. Eng. Struct. Dyn., doi: 10.1002/eqe/2755.   DOI
8 Lu, Y. and Panagiotou, M. (2015), "Earthquake damage-resistant tall buildings at near fault regions using base isolation and rocking core walls", Struct. Congress, 1266-1277.
9 Makris, N. (1997), "Rigidity-Plasticity-Viscosity: Can electrorheological dampers protect base-isolated structures from near-source ground motions?", Earthq. Eng. Struct. Dyn., 26(5), 571-591.   DOI
10 Makris, N. and Chang, S.P. (2000), "Effect of viscous, viscoplastic and friction damping on the response of seismic isolated structures", Earthq. Eng. Struct. Dyn., 29(1), 85-107.   DOI
11 Martelli, A., Clemente, P., De Stefano, A., Forni, M. and Salvatori, A. (2014), Recent development and application of seismic isolation and energy dissipation and conditions for their correct use, Perspectives on European Engineering and Seismology, Ed., Atilla Ansal, Book Series: Geotechnical, Geological and Earthquake Engineering, 1, 449-488, Springer.
12 Matsagar, V.A. and Jangid, R.S. (2004), "Influence of isolator characteristics on the response of base-isolated structures", Eng. Struct., 26(12), 1735-1749.   DOI
13 Mazza, F. and Vulcano, A. (2009), "Nonlinear response of RC framed buildings with isolation and supplemental damping at the base subjected to near-field earthquakes", J. Earthq. Eng., 13(5), 690-715.   DOI
14 Naderzadeh, A. (2009), "Application of seismic base isolation technology in Iran", MENSHIN, 63, 40-47.
15 PEER (2015), "Strong ground motion database", Pacific Earthquake Engineering Research Center, University of California, Berkeley, USA. http://ngawest2.berkeley.edu/site
16 Naeim, F. and Kelly, J.M. (1999), Design of seismic isolated structures: from theory to practice, mechanical characteristics and modeling of isolators, New York, Wiley.
17 Nagarajaiah, S., Reinhorn, A.M. and Constantinou, M.C. (1991), "Nonlinear dynamic analysis of three-dimensional base isolated structures: Part II", Technical Report NCEER-91-0005, National Center for Earthquake Engineering, State University of New York at Buffalo, New York, USA.
18 Nitta, Y., Nishitani, A. and Spencer Jr., B.F. (2006), "Semiactive control strategy for smart base isolation utilizing absolute acceleration information", Struct. Control Hlth. Monit., 13(2-3), 649-659.   DOI
19 Providakis, C.P. (2008), "Effect of LRB isolators and supplemental viscous dampers on seismic isolated buildings under near-fault excitations", Eng. Struct., 30(5), 1187-1198.   DOI
20 Providakis, C.P. (2009), "Effect of supplemental damping on LRB and FPS seismic isolators under near-fault ground motions", Soil Dyn. Earthq. Eng., 29(1), 80-90.   DOI
21 Ramallo, J.C., Johnson, E.A. and Spencer Jr., B.F. (2002), ""Smart" base isolation systems", J. Eng. Mech., 128(10), 1088-1099.   DOI
22 Ribakov, Y. (2010), "Reduction of structural response to near fault earthquakes by seismic isolation columns and variable friction dampers", Earthq. Eng. Eng. Vib., 9(1), 113-122.   DOI
23 Ribakov, Y. (2011), "Base-isolated structures with selective controlled semi-active friction dampers", Struct. Des. Tall Spec. Build., 20(7), 757-766.   DOI
24 Saifullah, M.K. (2015), "The necessity and the adequacy of near-source factors for seismically isolated buildings", Master Thesis, Istanbul University, Istanbul, Turkey.
25 Ribakov, Y. and Agranovich, G. (2008a), "Using hybrid isolation systems with friction dampers for seismic protection of structures", ENOC, Saint Petersburg, Russia.
26 Ribakov, Y., Blostotsky, B. and Iskhakov, I. (2006), "Theoretical model and laboratory tests of variable friction damper", Eur. Earthq. Eng., 20(1), 43-47.
27 Ribakov, Y. and Iskhakov, I. (2008), "Experimental methods for selecting base isolation parameters for public buildings", Open Constr. Build. Technol. J., 2, 1-6.   DOI
28 Symans, M.D. and Constantinou, M.C. (1999), "Semi-active control systems for seismic protection of structures: A state-of-the-art review", Eng. Struct., 21(6), 469-487.   DOI
29 Taylor, D.P. (1996), "Fluid dampers for application of seismic energy dissipation and seismic isolation", Eleventh World Conference on Earthquake Engineering, Paper No. 798, Acapulco, Mexico, June 23-28.
30 TEC07 (2007), "Turkish Earthquake Code: Regulations on Structures Constructed in Disaster Regions", Ministry of Public Works and Settlement, Ankara, Turkey.
31 Asher, J.W., Young, R.P. and Ewing, R.D. (1996), "Seismic isolation design of the San Bernardino County Medical Center replacement project", Struct. Des. Tall Build., 5(4), 265-279.   DOI
32 Tsang, H.-H., Lo, S.H., Xu, X. and Sheikh, M.N. (2012), "Seismic isolation for low-to-medium-rise buildings using granulated rubber-soil mixtures: numerical study", Earthq. Eng. Struct. Dyn., 41(14), 2009-2024.   DOI
33 UBC97 (1997), Uniform Building Code. International code of building officials (ICBO), California, USA.
34 Wolff, E.D., Ipek, C., Constantinou, M.C. and Tapan, M. (2015), "Effect of viscous damping devices on the response of seismically isolated structures", Earthq. Eng. Struct. Dyn., 44(2), 185-198.   DOI
35 Yang, J.N. and Agarwal, A.K. (2002), "Semi-Active hybrid control systems for nonlinear buildings against near-field earthquakes", Eng. Struct., 24(3), 271-280.   DOI
36 Alhan, C. and Gavin, H. (2004), "A parametric study of linear and non-linear passively damped seismic isolation systems for buildings", Eng. Struct., 26(4), 485-497.   DOI
37 Alhan, C., Gavin, H. and Aldemir, U. (2006), "Optimal control: basis for performance comparison of passive and semiactive isolation systems", J. Struct. Eng., 132(7), 705-713.   DOI
38 Alhan, C. and Oncu-Davas (2016), "Performance limits of seismically isolated buildings under near-field earthquakes", Eng. Struct., 116, 83-94   DOI
39 Alhan, C. and Ozgur, M. (2015), "Seismic responses of base-isolated buildings: efficacy of equivalent linear modeling under near-fault earthquakes", Smart Struct. Syst., 15(6), 1436-1461.
40 Alhan, C. and Surmeli, M. (2015), "The necessity and the adequacy of near-source factors for not-so-tall fixed-base buildings", Earthq. Eng. Eng. Vib., 14(1), 13-26.   DOI
41 Becker, T.C., Yamamoto, S., Hamaguchi, H., Higashino, M. and Nakashima, M. (2015), "Application of isolation to high-rise buildings: A Japanese design case study through a U.S. design code lens", Earthq. Spectra, 31(3), 1451-1470.   DOI
42 Bolt, B.A. (2004), Engineering seismology, in Earthquake Engineering from Engineering Seismology to Performance-Based Engineering, Eds., Bozorgnia Y and Bertero VV, CRC Press.
43 Bolt, B.A. and Abrahamson, N.A. (2003), Estimation of strong seismic ground motions, in International Handbook of Earthquake and Engineering Seismology Part B, Eds., Lee WHK, Kanamori H, Jennings PC, and Kisslinger, C, Book Series: International Geophysics Series, 81B, Academic Press Elsevier Science.
44 Building Code of Pakistan-Seismic Provisions (2007), Ministry of Housing and Works, Government of Pakistan.
45 Chavez, J.W. (2012), "Overview of the current seismic codes in Central and South America", Bull. IISEE, 46, 153-160.
46 Constantinou, M.C. and Symans, M.D. (1992), "Experimental and analytical investigation of seismic response of structures with supplemental fluid viscous dampers", Technical Report NCEER-92-0032, National Center for Earthquake Engineering Research, State University of New York at Buffalo.
47 Hall, J.F., Heaton, T.H., Halling, M.W. and Wald, D.J. (1995), "Near-source ground motion and its effects on flexible buildings", Earthq. Spectra, 11(4), 569-605.   DOI
48 Dan, M., Ishizawa, Y., Tanaka, S., Nakahara, S., Wakayama, S. and Kohiyama, M. (2015), "Vibration characteristics change of a base-isolated building with semi-active dampers before, during, and after the 2011 Great East Japan earthquake", Earthq. Struct., 8(4), 889-913.   DOI
49 ETABS (2002), "Integrated building design software", Computers and Structures Inc. Berkeley, USA.
50 Gavin, H., Alhan, C. and Oka, N. (2003), "Fault tolerance of semiactive seismic isolation", J. Struct. Eng., 129(7), 922-932.   DOI
51 Hall, J.F. and Ryan, K.L. (2000), "Isolated buildings and the 1997 UBC near-source factors", Earthq. Spectra, 16(2), 393-411.   DOI
52 Heaton, T.H., Hall, J.F., Wald, D.J. and Halling, M.W. (1995), "Response of high-rise and base-isolated buildings to a hypothetical M(W) 7.0 blind thrust earthquake", Science, 267(5195), 206-211.   DOI
53 Hoseini Vaez, S.R., Naderpour, H. and Barros, R.C. (2014), "Influence of equivalent pulses of near fault ground motions on base-isolated RC structures", Proceedings of the 9th International Conference on Structural Dynamics, EURODYN, 30 June-2 July, Porto.
54 Hussain, S., Lee, D. and Retamal, E. (1998), "Viscous damping for base isolated structures", Taylor Devices Inc. North Tonawanda, NY.
55 Inaudi, J.A. and Kelly, J.M. (1993), "Hybrid isolation systems for equipment protection", Earthq. Eng. Struct. Dyn., 22(4), 297-313.   DOI
56 Indian Standard-Criteria for Earthquake Resistant Design of Structures (2002), IS 1893 (Part 1), Fifth Revision, Bureau of Indian Standards.