1 |
Abidi, M. and Madhuri, M. (2012), "Review on shear wall for soft story high- rise buildings", Int. J. Eng. Adv. Tech., 1(6).
|
2 |
Al-Aasam, H.S. and Mandal, P. (2013), "Simplified procedure to calculate by hand the natural periods of semirigid steel frames", J. Struct. Eng., ASCE, 139(6), 1082-1087.
DOI
|
3 |
Baikov, V. and Sigalov, E. (1983), Reinforced Concrete Structures, Volume 2, Moscov: Mir Publisher, 390.
|
4 |
Balendra, T., Swaddiwudhipong, S. and Quek S.T. (1984), "Free vibration of asymmetric shear wall-frame buildings", Earth. Eng. Struct. Dyn., 12(5), 629-650.
DOI
|
5 |
Basu, A., Nagpal, A. K,. and Kaul, S. (1984), "Charts for seismic design of frame-wall systems", J. Struct. Eng. ASCE, 110(1), 31-46.
DOI
|
6 |
Belhadj, A.H. and Meftah, S.A. (2015), "Simplified finite element modelling of non-uniform tall building structures comprising wall and frame assemblies including P- effects", Earthq. Struct., 8(1), 253-273.
DOI
|
7 |
Bilyap, S. (1979), "An approximate solution for high- rise reinforced concrete panel buildings with combined diaphragms", Int. J. Housing Sci., 3(6), 477-481.
|
8 |
Bozdogan, K.B. (2009), "An approximate method for static and dynamic analyses of symmetric wall-frame buildings", Struct. Des. Tall Spec. Build., 18(3), 279-290.
DOI
|
9 |
Carpinteri, A., Lacidogna, G. and Cammarano, S. (2013), "Structural analysis of high- rise buildings under horizontal loads: A study on the Intesa Sanpaolo Tower in Turin", Eng. Struct., 56, 1362-1371.
DOI
|
10 |
Colunga, A.T. (2010), "Review of the Soft Story High-Rise Buildings", Open Civ. Eng. J., 4, 1-15.
|
11 |
Dym, C.L. and Williams, H.E. (2007), "Estimating fundamental frequencies of tall buildings", J. Struct. Eng., ASCE, 133(10), 1479-1483.
DOI
|
12 |
Georgoussis, K.G. (2006), "A simple model for assessing and modal response quantities in symmetrical buildings", Struct. Des. Tall Spec. Build., 15(2), 139-151.
DOI
|
13 |
Georgoussis, K.G. (2014), "Modified seismic analysis of multistory asymmetric elastic buildings and suggestions for minimizing the rotational response", Earthq. Struct., 7(1), 39-55.
DOI
|
14 |
Heidebrecht, A.C. and Stafford Smith, B. (1973), "Approximate analysis of tall wall-frame buildings", J. Struct. Eng., ASCE, 99(2), 199-221.
|
15 |
Hoenderkamp, D.C.J. (2001), "Elastic analysis of asymmetric tall buildings", Struct. Des. Tall Build., 10(4), 245-261.
DOI
|
16 |
Hoenderkamp, D.C.J. (2002), "A simplified analysis of high-Rise structures with cores", Struct. Des. Tall Build., 11(2), 93-107.
DOI
|
17 |
Jahanshahi, M.R. and Rahgozar, R. (2012), "Free vibration analysis of combined sytem with variable cross section in tall buildings", Struct. Eng. Mech., 42(4), 715-728.
DOI
|
18 |
Kazaz, I. and Gulkan, P. (2012), "An improved frame-shear wall model:continuum approach", Struct. Des. Tall Spec. Build., 21(7), 524-542.
DOI
|
19 |
Kuang, J.S. and Ng, S.C. (2000), "Coupled lateral vibration of asymmetric shear wall structures", Thin Wall. Struct., 38(2), 93-104.
DOI
|
20 |
Kuang, J.S. and Ng, C. (2009), "Lateral shear -St. Venant torsion coupled vibration of asymmetric -plan frame structures", Struct. Des. Tall Spec. Build., 18(6), 647-656.
DOI
|
21 |
Kaviani, P., Rahgozar, R. and Saffari, H. (2008), "Approximate analysis of tall buildings using sandwich beam models with variable cross-section", Struct. Des. Tall Spec. Build., 17(2), 401-418.
DOI
|
22 |
Meftah, S.A. and Tounsi, A. (2008), "Vibration characteristics of tall buildings braced by shear walls and thin-walled open-section structures", Struct. Des. Tall Spec. Build., 17(1), 203-216.
DOI
|
23 |
Laier, J.E. (2008), "An improved continuous medium technique for structural frame analysis", Struct. Des. Tall Spec. Build., 17(1), 25-38.
DOI
|
24 |
Malekinejad, M. and Rahgozar, R. (2013), "An analytical approach to free vibration analysis of multioutrigger- belt truss-reinforced tall buildings", Struct. Des. Tall Spec. Build., 22(4), 382-398.
DOI
|
25 |
Mancini, E. and Savassi, W. (1999), "Tall buildings structures unified plane panels behavior", Struct. Des. Tall Build., 8(2), 155-170.
DOI
|
26 |
Miranda, E. (1999), "Approximate lateral drift demands in multi-story buildings subjected to earthquakes", J. Struct. Eng., ASCE, 125(4), 417-425.
DOI
|
27 |
Miranda, E. and Reyes, J.C. (2002), "Approximate lateral drift demands in multi-story buildings with nonuniform stiffness", J. Struct. Eng., ASCE, 128(7), 840-849.
DOI
|
28 |
Miranda, E. and Taghavi, S. (2005), "Approximate floor acceleration demands in multistorey buildings I formulation", J. Struct. Eng., ASCE, 131(2), 203-211.
DOI
|
29 |
Ng, S.C. and Kuang, J.S. (2000), "Triply coupled vibration of asymmetric wall-frame structures", J. Struct. Eng., ASCE, 128(7), 840-849.
|
30 |
Nollet, J.M. and Stafford Smith, B. (1993), "Behavior of curtailed wall-frame structures", J. Struct. Eng., ASCE, 119(10), 2835-2853.
DOI
|
31 |
Pan, P., Wu, S. and Nie, X. (2015), "A distributed parameter model of a frame pin-supported wall structure", Earthq. Eng. Struct. Dyn, 44(10), 1643-1659.
DOI
|
32 |
Rafezy, B. and Howson, W.P. (2008), "Vibration analysis of doubly asymmetric, three dimensional structures comprising wall and frame assemblies with variable cross section", J. Sound Vib., 318(1-2), 247-266.
DOI
|
33 |
Potzta, G. and Kollar, L.P. (2003), "Analysis of building structures by replacement sandwich beams", Int. J. Solid. Struct., 40(3), 535-553.
DOI
|
34 |
Quanfeng, W., Lingyun, W. and Qiangsheng, L. (1999), "Seismic response of stepped frame-shear wall structures by using numerical method", Comput. Method. Appl. Mech. Eng., 173(1), 31-39.
DOI
|
35 |
Rafezy, B., Zare, A. and Howson, W.P. (2007), "Coupled lateral -torsional frequencies of asymmetric, three dimensional frame structures", Int. J. Solid. Struct., 44(1), 128-144.
DOI
|
36 |
Reinoso, E. and Miranda, E. (2005), "Estimation of floor acceleration demands in high rise buildings during earthquakes", Struct. Des. Tall Spec. Build., 14(2), 107-130.
DOI
|
37 |
Rodriguez, A.A. and Miranda, E. (2015), "Assesment of building behavior under near-fault pulse-like ground motions through simplified models", Soil Dyn. Earthq. Eng., 79, 47-58.
DOI
|
38 |
Rosman, R. (1964), "Approximate analysis of shear walls subject to lateral loads", Proc. Am. Concr. Inst., 61(6), 717-734.
|
39 |
Rosman, R. (1974), "Stability and dynamics of shear -wall frame structures", Build. Sci., 9, 55-63.
DOI
|
40 |
Rosman, R. (1981), "Buckling and vibrations of spatial building structures", Eng. Struct., 3(4), 194-202.
DOI
|
41 |
Savassi, W. and Mancini, E. (2004), "One-dimensional finite element solution for tall building structures unified plane panels formulation", Struct. Des. Tall Spec. Build., 13(4), 315-333.
DOI
|
42 |
Taghavi, S. and Miranda, E. (2005), "Approximate floor acceleration demands in multistorey buildings II: applications", J. Struct. Eng., ASCE, 131(2), 212-220.
DOI
|
43 |
Savassi, W. and Mancini, E. (2009), "One-dimensional finite element solution for non-uniform tall building structures and loading", Struct. Des. Tall Spec. Build., 18(4), 441-453.
DOI
|
44 |
Stafford Smith, B. and Crowe, E. (1986), "Estimating periods of vibration of tall buildings", J. Struct. Eng., ASCE, 112(5), 1005-1019.
DOI
|
45 |
Swaddiwudhipong, S., Lee, L.S. and Zhou, Q. (2001), "Effect of the axial deformation on vibration of tall buildings", Struct. Des. Tall Build., 10(2), 79-91.
DOI
|
46 |
Tarjan, G. and Kollar, P.L. (2004), "Approximate analysis of building structures with identical stories subjected to earthquakes", Int. J. Solid. Struct., 41(5-6), 1411-1433.
DOI
|
47 |
Tekeli, H., Atimtay, E. and Turkmen, M. (2015), "An approximation method for design applications related to sway in RC framed buildings", Int J.Civ. Eng., 13(3), 321-330.
|
48 |
Toutanji, H. (1997), "The effect of foundation flexibility on the interaction of walls and frames", Eng. Struct., 19(12), 1036-1042.
DOI
|
49 |
Wang, S.K. (1997), "Stiffness, stability and fundemantal period of coupled shear walls of variable thickness", Proc. Inst. Civ. Eng. Struct. Build., 122(3), 334-338.
DOI
|
50 |
Wang, Y., Arnaouti, C. and Guo, S. (2000), "A Simple approximate formulation for the first two frequencies of asymmetric wall-frame multi-storey building structures", J. Sound Vib., 236(1), 141-160.
DOI
|
51 |
Wdowicki, J. and Wdowicka, E. (2012), "Analysis of shear wall structures of variable cross section", Struct. Des. Tall Spec. Build., 21(1), 1-15.
DOI
|
52 |
Zalka, K.A. (2009), "A simple method for the deflection analysis of tall-wall-frame building structures under horizontal load", Struct. Des. Tall Spec. Build., 18(3), 291-311.
DOI
|
53 |
Yang, D., Pan, J. and Li, G. (2010), "Interstory drift ratio of building structures subjected to near-fault ground motions based on generalized drift spectral analysis", Soil Dyn. Earthq. Eng., 30(11), 1182-1197.
DOI
|
54 |
Zalka, K.A. (2000), Global Structural analysis of Buildings, Taylor & Francis Group, Boca Raton, FL, USA.
|
55 |
Zalka, K.A. (2001), "A simplified method for calculation of natural frequencies of wall-frame buildings", Eng. Struct., 23(12), 1544-1555.
DOI
|
56 |
Zalka, K.A. (2013), Structural analysis of regular multi-storey buildings, Taylor & Francis Group, Boca Raton, FL, USA.
|
57 |
Zalka, K.A. (2014), "Maximum deflection of asymmetric wall-frame buildings under horizontal load", Per. Poly. Civ. Eng., 58(4), 1-10.
DOI
|