1 |
Chao, S.-H., Goel, S.C. and Lee, S.-S. (2007), "A seismic design lateral force distribution based on inelastic state of structures", Earthq. Spectra, 23(3), 547-569.
DOI
|
2 |
Cornell, C.A. and Krawinkler, H. (2000), Progress and challenges in seismic performance assessment, PEER Center News 2000, 3, 1-3.
|
3 |
Dhakal, R.P. (2011), Structural Design for Earthquake Resistance: Past, Present and Future, Report for Canterbury Earthquakes Royal Commission: Department of Civil and Natural Resources Engineering, University of Canterbury, Christchurch, New Zealand.
|
4 |
Erduran, E. and Yakut, A. (2004), "Drift based damage functions for reinforced concrete columns", Comput. Struct., 82(2), 121-130.
DOI
|
5 |
Estekanchi, H. and Arjomandi, K. (2007), "Comparison of damage indexes in nonlinear time history analysis of steel moment frames", Asian J. Civ. Eng. (Building and Housing), 8(6), 629-646.
|
6 |
Fajfar, P. (1992), "Equivalent ductility factors, taking into account low-cycle fatigue", Earthq. Eng. Struct. Dyn., 21(10), 837-848.
DOI
|
7 |
FEMA-356 (2000), Prestandard and commentary for the seismic rehabilitation of buildings, Federal Emergency Management Agency, Washington D.C., USA.
|
8 |
Ghobarah, A. (2004), "On drift limits associated with different damage levels", Proceedings of an International Workshop on Performance-based Seismic Design Concepts and Implementation, Bled, Slovenia.
|
9 |
Habibi, A.R. and Izadpanah, M. (2012), "Drift based damage functions for reinforced concrete moment resisting frames", J. Seismol. Earthq. Eng., 14(2), 117-129.
|
10 |
ISIRI2800 (2005), Iranian code of practice for seismic resistant design of buildings, 3rd version, Tehran, Iran. (in Persian)
|
11 |
Aghagholizadeh, M. and Massumi, A. (2012), "Relation between dynamic characteristics and damage index of RC-MRFs using non-linear incremental dynamic analyses", The 15th World Conference on Earthquake Engineering (15WCEE), Lisbon, Portugal.
|
12 |
Allahvirdizadeh, R., Khanmohammadi, M. and Marefat, M.S. (2013), "Investigating effects of scaling and selecting earthquake ground motions on performance-based design of R.C buildings", 4th International Conference on Concrete and Development, Tehran, Iran.
|
13 |
ASCE7-10 (2010), Minimum Design Loads for Buildings and Other Structures, Reston.
|
14 |
Behnam, B., Sebt, M.H. and Vosoughifar, H.M. (2006), "Evaluating quality seismic damage index for urban residential buildings", Int. J. Civ. Eng., 4(2), 136-145.
|
15 |
Bommer, J.J. and Pinho, R. (2006), "Adapting earthquake actions in Eurocode 8 for performance-based seismic design", Earthq. Eng. Struct. Dyn., 35(1), 39-55.
DOI
|
16 |
Calvi, G.M., Pinho, R., and Crowley, H. (2006), "State-of-the-knowledge on the period elongation of RC buildings during strong ground shaking", First European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland.
|
17 |
Jiang, H., Fu, B. and Chen, L. (2013), "Damage-control seismic design of moment-resisting RC frame buildings", J. Asian Architect. Build. Eng., 12(1), 49-56.
DOI
|
18 |
Jiang, H., Lu, X., Fu, B. and Chen, L. (2012), "Constant-damage yield strength spectra", Proceedings of the 15th World Conference of Earthquake Engineering (15WCEE), Lisbon, Portugal.
|
19 |
Kamaris, G.S., Vallianatou, Y. and Beskos, D.E. (2012), "Seismic damage estimation of in-plane regular steel moment resisting and x-braced frames", Bull. Earthq. Eng., 10(6), 1745-1766.
DOI
|
20 |
Lu, Y., Gu, X. and Wei, J. (2009), "Prediction of seismic drifts in multi-storey frames with a new storey capacity factor", Eng. Struct., 31(2), 345-357.
DOI
|
21 |
Mikami, T. and Iemura, H. (2001), "Demand spectra of yield strength and ductility factor to satisfy the required seismic performance objectives", Proceedings of JSCE, Japan.
|
22 |
Moustafa, A. (2011), "Damage-based design earthquake loads for single-degree-of-freedom inelastic structures", J. Struct. Eng., 137(3), 456-467.
DOI
|
23 |
Naeim, F. (2004), "Impact of the 1994 Northridge earthquake on the art and practice of structural engineering", Struct. Des. Tall Spec. Build., 13(5), 373-389.
DOI
|
24 |
Newmark, N.M. and Rosenblueth, E. (1971), Fundamentals of Earthquake Engineering, Prentice Hall, Englewood Cliffs.
|
25 |
Panyakapo, P. (2004), "Evaluation of site-dependent constant-damage design spectra for reinforced concrete structures", Earthq. Eng. Struct. Dyn., 33(12), 1211-1231.
DOI
|
26 |
Park, Y.-J. and Ang, A.H.S. (1985), "Mechanistic seismic damage model for reinforced concrete", J. Struct. Eng., 111(4), 722-739.
DOI
|
27 |
Seismosoft. (2013), SeismoMatch v 2.1. Available at http://seismosoft.com.
|
28 |
PEER. (2006), PEER NGA Database, Available at http://peer.berkeley.edu/nga
|
29 |
Priestley, M.J.N., Calvi, G.M. and Kowalsky, M.J. (2007), Displacement-Based Seismic Design of Structures, IUSS Press, Pavia, Italy.
|
30 |
Seifried, A.E. (2013), "Response spectrum compatibilization and its impact on structural response assessment", Ph.D. thesis, Stanford University, California.
|
31 |
Sezen, H., Elwood, K.J., Whittaker, A.S., Mosalam, K.M., Wallace, J.W. and Stanton, J.F. (2000), Structural engineering reconnaissance of the August 17, 1999 earthquake: Kocaeli (Izmit), Turkey: Pacific Earthquake Engineering Research Center (PEER), California.
|
32 |
Takeda, T., Sozen, M.A. and Nielsen, N.N. (1970), "Reinforced concrete response to simulated earthquakes", J. Struct. Div., 96(12), 2557-2573.
|
33 |
UBC-97 (1997), Uniform Building Code, Whittier, California.
|
34 |
Wang, M.-L. and Shah, S.P. (1987), "Reinforced concrete hysteresis model based on the damage concept", Earthq. Eng. Struct. Dyn., 15(8), 993-1003.
DOI
|
35 |
Xue, Q. (2000), "Need of performance-based earthquake engineering in Taiwan: a lesson from the Chichi earthquake", Earthq. Eng. Struct. Dyn., 29(11), 1609-1627.
DOI
|