1 |
ACI Committee 440.2R (2002), Guide for the Design and Construction of Externally Bonded FRP systems for strengthening Concrete Structures, American Concrete Institute, Farmington Hills, MI, USA.
|
2 |
Antonopoulos, C.P. and Triantafillou, T.C. (2003), "Experimental investigation of FRP-strengthened RC beam-column joints", J. Compos. Constr., ASCE, 7(1), 39-49.
DOI
|
3 |
Bousias, N.S., Triantafillou, C.T., Fardis, N.M., Spathis, L. and O'Regan, A.B. (2004), "Fiber-reinforced polymer retrofitting of rectangular reinforced concrete columns with or without corrosion", Struct. J., 101(4), 512-520.
|
4 |
Della Corte, G.D., Barecchia, E. and Mazzolani, F.M. (2006), "Seismic upgrading of RC buildings by FRP: Full-scale tests of a real structure", J. Mater. Civ. Eng., 18 (5), 659-669.
DOI
|
5 |
Di Ludovico, M., Balsamo, A., Prota, A. and Manfredi, G. (2008a), "Comparative assessment of seismic rehabilitation techniques on a Full-Scale 3-Story RC moment frame structure", Struct. Eng. Mech., 28(6), 727-747.
DOI
|
6 |
Di Ludovico, M., Prota, A., Manfredi, G. and Cosenza, E. (2008b), "Seismic strengthening of an underdesigned RC structure with FRP", Earthq. Eng. Struct. Dyn., 37(1), 141-162.
DOI
|
7 |
Engindeniz, M., Kahn, L.F. and Zureick, A.H. (2005), "Repair and strengthening of reinforced concrete beam-column joints: State of the art", ACI Struct. J., 102(2), 187-197.
|
8 |
Eurocode 8 (2005), Design of structures for earthquake resistance, Part 3: Assessment and retrofitting of buildings, European Standard EN 1998-3, CEN (European Committee for Standardization), Brusells.
|
9 |
Fardis, M.N. (2009), Seismic Design, Assessment and Retrofitting of Concrete Buildings, based on ENEurocode 8, Series: Geotechnical, Geological, and Earthquake Engineering, Springer, New York, USA.
|
10 |
fib Bulletin 35 (2006), Retrofitting of concrete structures through Externally bonded FRPs, with emphasis on seismic applications, Federation Internationale du Beton, Lausanne, Switzerland.
|
11 |
Kakaletsis, D.J. (2011), "Comparison of CFRP and alternative seismic retrofitting techniques for bare and infilled RC frames", J. Compos. Constr., ASCE, 15(4), 565-577.
DOI
|
12 |
Kakaletsis, D.J. and Karayannis, C.G. (2008), "Influence of masonry strength and openings on infilled R/C frames under cycling loading", J. Earthq. Eng., 12(2), 197-221.
DOI
|
13 |
Kakaletsis, D.J. and Karayannis, C.G. (2009), "Experimental investigation of infilled R/C frames with openings", ACI Struct. J., 106(2), 132-141.
|
14 |
Karayannis, C.G. and Sirkelis, G.M. (2008), "Strengthening and rehabilitation of RC beam-column joints, using carbon-FRP jacketing and epoxy resin injection", J. Earthq. Eng. Struct. Dyn., 37(5), 769-790.
DOI
|
15 |
Koutas, L. and Triantafillou, T. (2013), "Use of anchors in shear strengthening of reinforced concrete Tbeams with FRP", J. Compos. Constr., 17(1), 101-107.
DOI
|
16 |
Mazza, F. (2015), "Comparative study of the seismic response of RC framed buildings retrofitted using modern techniques", Earthq. Struct., 9(1), 29-48.
DOI
|
17 |
Koutas, L., Pitytzogia, A., Triantafillou, T. and Bousias, S. (2014), "Strengthening of infilled reinforced concrete frames with TRM: Study on the development and testing of textile-based anchors", J. Compos. Constr., 18(3), A4013015.
DOI
|
18 |
Lavan, O. and Levy, R. (2010), "Performance based optimal seismic retrofitting of yielding plane frames using added viscous damping", Earthq. Struct., 1(3), 307-326.
DOI
|
19 |
Li, B., Siu-shu Lam, E., Wu, B. and Ya-yong Wang, Y. (2015), "Seismic behavior of reinforced concrete exterior beam-column joints strengthened by ferrocement composites", Earthq. Struct., 9(1), 233-256.
DOI
|
20 |
Yurdakul, O. and Avsar, O. (2015), "Structural repairing of damaged reinforced concrete beam-column assemblies with CFRPs", Struct. Eng. Mech., 54(3), 521-543.
DOI
|