Browse > Article
http://dx.doi.org/10.12989/eas.2016.10.2.409

Residual drift analyses of realistic self-centering concrete wall systems  

Henry, Richard S. (Department Civil and Environmental Engineering, University of Auckland)
Sritharan, Sri (Department Civil, Construction, and Environmental Engineering, Iowa State University)
Ingham, Jason M. (Department Civil and Environmental Engineering, University of Auckland)
Publication Information
Earthquakes and Structures / v.10, no.2, 2016 , pp. 409-428 More about this Journal
Abstract
To realise the full benefits of a self-centering seismic resilient system, the designer must ensure that the entire structure does indeed re-center following an earthquake. The idealised flag-shaped hysteresis response that is often used to define the cyclic behaviour of self-centering concrete systems seldom exists and the residual drift of a building subjected to an earthquake is dependent on the realistic cyclic hysteresis response as well as the dynamic loading history. Current methods that are used to ensure that re-centering is achieved during the design of self-centering concrete systems are presented, and a series of cyclic analyses are used to demonstrate the flaws in these current procedures, even when idealised hysteresis models were used. Furthermore, results are presented for 350 time-history analyses that were performed to investigate the expected residual drift of an example self-centering concrete wall system during an earthquake. Based upon the results of these time-history analyses it was concluded that due to dynamic shake-down the residual drifts at the conclusion of the ground motion were significantly less than the maximum possible residual drifts that were observed from the cyclic hysteresis response, and were below acceptable residual drift performance limits established for seismic resilient structures. To estimate the effect of the dynamic shakedown, a residual drift ratio was defined that can be implemented during the design process to ensure that residual drift performance targets are achieved for self-centering concrete wall systems.
Keywords
residual drift; self-centering; unbonded post-tensioning; precast concrete; shear walls; seismic response;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Aaleti, S. and Sritharan, S. (2009), "A simplified analysis method for characterizing unbonded posttensioned precast wall systems", Eng. Struct., 31(12), 2966-2975.   DOI
2 ACI Innovation Task Group 5 (2007), "Acceptance criteria for special unbonded post-tensioned precast structural walls based on validation testing (ITG 5.1-07)", American Concrete Institute, Farmington Hills, MI.
3 ACI Innovation Task Group 5 (2009), "Requirements for Design of a Special Unbonded Post-Tensioned Precast Shear Wall Satisfying ACI ITG-5.1 (ITG 5.2-09)", American Concrete Institute, Farmington Hills, MA.
4 Carr, A. (2003), RUAUMOKO-Inelastic Dynamic Analysis Program, University of Canterbury, Christchurch, New Zealand.
5 Chou, C.-C. and Hsu, C.-P. (2008), "Hysteretic model development and seismic response of unbonded posttensioned precast CFT segmental bridge columns", Earthq. Eng. Struct. Dyn., 37(6), 919-934.   DOI
6 Christopoulos, C., Filiatrault, A. and Folz, B. (2002), "Seismic response of self-centring hysteretic SDOF systems", Earthq. Eng. Struct. Dyn., 31(5), 1131-1150.   DOI
7 Christopoulos, C., Pampanin, S. and Priestley, M.J.N. (2003), "Performance-based seismic response of frame structures including residual deformations. Part I: Single-degree of freedom systems", J. Earthq. Eng., 7(1), 97-118.   DOI
8 Cox, K.E. and Ashford, S.A. (2002), "Characterization of large velocity pulses for laboratory testing", PEER 2002/22, Pacific Earthquake Engineering Research Center, Berkeley, CA.
9 Eatherton, M.R. and Hajjar, J.F. (2011), "Residual drifts of self-centering systems including effects of ambient building resistance", Earthq. Spectra, 27(3), 719-744.   DOI
10 Henry, R.S. (2011), "Self-centering precast concrete walls for buildings in regions with low to high seismicity", Ph.D. thesis, University of Auckland, Auckland.
11 Henry, R.S., Aaleti, S., Sritharan, S. and Ingham, J.M. (2012), "Seismic analysis of a low-damage Precast Wall with End Columns (PreWEC) including interaction with floor diaphragms", J. Struct. Eng. Soc. NZ. (SESOC), 25(1), 69-81.
12 Kurama, Y.C. (2002), "Hybrid post-tensioned precast concrete walls for use in seismic regions", PCI J., 47(5), 36-59.
13 Ma, Q.T. (2010), "The mechanics of rocking structures subjected to ground motions", Ph.D. thesis, University of Auckland, New Zealand.
14 MacRae, G.A. and Kawashima, K. (1997), "Post-earthquake residual displacements of bilinear oscillator", Earthq. Eng. Struct. Dyn., 26(7), 701-716.   DOI
15 NZS 3101:2006 Concrete Structures Standard. Wellington, New Zealand, Standards New Zealand: 646.
16 Palermo, A., Pampanin, S. and Marriott, D. (2007), "Design, modeling, and experimental response of seismic resistant bridge piers with posttensioned dissipating connections", J. Struct. Eng., 133(11), 1648-1661.   DOI
17 Palmieri, L., Sagan, E., French, C. and Kreger, M. (1997), "Ductile connections for precast concrete frame systems", Mete A. Sozen Symposium, ACI SP 162, American Concrete Institute, Farmington Hills, MI.
18 Pampanin, S., Marriott, D. and Palermo, A. (2010), PRESSS design handbook, Auckland, New Zealand Concrete Society.
19 Pennucci, D., Calvi, G.M. and Sullivan, T.J. (2009), "Displacement-based design of precast walls with additional dampers", J. Earthq. Eng., 13(S1), 40-65.   DOI
20 Perez, F. J., R. Sause and L. W. Lu (2003). "Lateral load tests of unbonded post-tensioned precast concrete walls", ACI Special Publication, 211, 161-182.
21 Priestley, M.J.N., Calvi, G.M. and Kowalsky, M.J. (2007), Displacement-based seismic design of structures, IUSS Press.
22 Priestley, M.J.N., Sritharan, S., Conley, J.R. and Pampanin, S. (1999), "Preliminary results and conclusions from the PRESSS five-story precast concrete test building", PCI J., 44(6), 42-67.   DOI
23 Rahman, M.A. and Sritharan, S. (2006), "An evaluation of force-based design vs. direct displacement-based design of jointed precast post-tensioned wall systems", Earthq. Eng. Eng. Vib., 5(2), 285-296.   DOI
24 Rahman, M.A. and Sritharan, S. (2007), "Performance-based seismic evaluation of two five-story precast concrete hybrid frame buildings", J. Struct. Eng., 133(11), 1489-1500.   DOI
25 Restrepo, J.I. and Rahman, A. (2007), "Seismic performance of self-centering structural walls incorporating energy dissipators", J. Struct. Eng., 133(11), 1560-1570.   DOI
26 Seismology Committee (1999), Recommended lateral force requirements and commentary (Blue book), Structural Engineers Association of California (SEAOC), 327-421.
27 Sritharan, S., Aaleti, S., Henry, R.S., Liu, K.Y. and Tsai, K.C. (2015), "Precast concrete wall with end columns (PreWEC) for earthquake resistant design", Earthq. Eng. Struct. Dyn., 44(12), 2075-2092.   DOI
28 Stanton, J., Stone, W.C. and Cheok, G.S. (1997), "A hybrid reinforced precast frame for seismic region", PCI J., 42(2), 20-32.
29 Wight, G.D., Kowalsky, M.J. and Ingham, J.M. (2004), "Shake table testing of post-tensioned concrete masonry walls", RD-04-04, North Carolina State University, Raleigh, NC, USA.