1 |
Asgarian, B. and Shokrgozar, H.R. (2009), "BRBF response modification factor", J. Constr. Steel Res., 65(2), 290-298.
DOI
|
2 |
Bozorgnia, Y., Bertero, V.V., Uang, C.M. and Nakashima, M. (2003), Earthquake Engineering From Engineering Seismology To Performance-based Engineering, CRC press, New York, USA.
|
3 |
Clark, P., Aiken, I., Tajirian, F.F., Kasai, K., Ko, E. and Kimura, I. (1999), "Design procedures for buildings incorporating hysteretic damping devices", Design Procedures for Buildings Incorporating Hysteretic Damping Devices, 1(1), 1-21.
|
4 |
FEMA 350 (2000), Recommended seismic design criteria for new steel moment-frame buildings, SAC Joint Venture, Federal Emergency Management Agency, Washington, DC., Report No. FEMA-350.
|
5 |
Guneyisi, E.M. (2012), "Seismic reliability of steel moment resisting framed buildings retrofitted with buckling restrained braces", Earthq. Eng. Struct. Dyn., 41(5), 853-874.
DOI
|
6 |
Hoveidae, N. and Rafezy, B. (2012), "Overall buckling behavior of all-steel buckling restrained braces", J. Constr. Steel Res., 79, 151-158.
DOI
|
7 |
International Building Code (2009), International Building Council, Inc.
|
8 |
Iranian building codes and standards (2005), Iranian code of practice for seismic resistance design of buildings, Standard no. 2800-05 (3rd edition), Tehran.
|
9 |
Iranian National Building Code (2008), 10th part, steel structure design. Tehran (Iran): Ministry of Housing and Urban Development.
|
10 |
Jalayer, F. and Cornell, C.A. (2003), "A technical framework for probability-based demand and capacity factor (DCFD) seismic formats", RMS.
|
11 |
Ju, Y.K., Kim, M.H., Kim, J. and Kim, S.D. (2009), "Component tests of buckling-restrained braces with unconstrained length", Eng. Struct., 31(2), 507-516.
DOI
|
12 |
Kumar, G.R., Kumar, S.S. and Kalyanaraman, V. (2007), "Behaviour of frames with Non-Buckling bracings under earthquake loading", J. Constr. Steel Res., 63(2), 254-262.
DOI
|
13 |
Lin, K.C., Lin, C.C.J., Chen, J.Y. and Chang, H.Y. (2010), "Seismic reliability of steel framed buildings", Struct. Saf., 32(3), 174-182.
DOI
|
14 |
Luco, N. and Cornell, C.A., (1998), "Seismic drift demands for two SMRF structures with brittle connections", Structural Engineering World Wide 1998, Elsevier Science Ltd., Oxford, England, Paper T158-3.
|
15 |
Mazzoni, S., McKenna, F., Scott, M.H., Fenves, G.L. and Jeremic, B. (2007), "Opensees Command Language Manual".
|
16 |
Park, Junhee, Lee, Junho and Kim, Jinkoo (2012), "Cyclic test of buckling restrained braces composed of square steel rods and steel tube", Steel Compos. Struct., 13(5), 423-436.
DOI
|
17 |
Rai, D.C. and Goel, S.C. (2003), "Seismic evaluation and upgrading of chevron braced frames", J. Constr. Steel Res., 59(8), 971-994.
DOI
|
18 |
Research Report (2011), "Probabilistic Seismic hazard analysis phase I - greater Tehran regions final report". http://iranhazard.mporg.ir/
|
19 |
Sabelli, R., Mahin, S. and Chang, C. (2003), "Seismic demands on steel braced frame buildings with buckling-restrained braces", J. Eng. Struct., 25(5), 655-666.
DOI
|
20 |
Tsai, Keh-Chyuan, Weng, Yuan-Tao, Lin, Sheng-Lin and Goel, Subhash (2004), "Pseudo-dynamic test of a full-scale CFT/BRB frame, part 1- performance based specimen design", 13th World Conference on Earthquake Engineering, Vancouver, Canada.
|
21 |
Vamvatsikos, D. and Cornell, C.A. (2002), "Seismic performance, capacity and reliability of structures as seen through incremental dynamic analysis", Ph.D. Dissertation, Stanford university, Stanford, USA.
|