1 |
ACI Committee 318 (2011), Building Code Requirements for Structural Concrete and Commentary.
|
2 |
American Society of Civil Engineers (2010), Minimum Design Loads for Buildings and Other Structures (ASCE/SEI 7-10): Reston.
|
3 |
Aydin, E., Boduroglub, M.H. and Guney, D. (2007), "Optimal damper distribution for seismic rehabilitation of planar building structures", Eng. Struct., 29(2), 176-185.
DOI
|
4 |
Bergman, D.M. and Goel, S.C. (1987), Evaluation of cyclic testing of steel plate devices for added damping and stiffness, Report no. UMCE87-10. The University of Michigan.
|
5 |
Blau, P. (2001), Compositions, functions, and testing of friction brake materials and their additives, Technical Report ORNL/TM-2001/64, Oak Ridge National Laboratory.
|
6 |
Chan, R.W.K. and Albermani, F. (2008), "Experimental study of slit damper for passive energy dissipation", Eng. Struct., 30(4), 1058-1066.
DOI
|
7 |
Celik, O.C. and Ellingwood, B.R. (2009), "Seismic risk assessment of gravity load designed reinforced concrete frames subjected to Mid-America ground motions", J. Struct. Eng., 135(4), 414-424.
DOI
|
8 |
Chen, C.-S., Chen, K.-C., Pong, W.S. and Tsai, C.S. (2002), "Parametric study for buildings with combined displacement-dependent and velocity-dependent energy dissipation devices", Struct. Eng. Mech., 14(1), 85-98.
DOI
|
9 |
Choi, H. and Kim, J. (2006), "Energy-based seismic design of buckling-restrained braced frames using hysteretic energy spectrum", Eng. Struct., 28(2), 304-311.
DOI
|
10 |
Choi, K.S. and Kim, H.J. (2014), "Strength demand of hysteretic energy dissipating devices alternative to coupling beams in high-rise buildings", Int. J. High-Rise Build., 3(2), 107-120
|
11 |
Damptech (2014), Friction Dampers-Capacities and Dimensions. http://www.damptech.com/download.html
|
12 |
Kim, J., Park, J. and Kim, S.D. (2009), "Seismic behavior factors of buckling-restrained braced frames", Struct. Eng. Mech., 33(3), 261-284.
DOI
|
13 |
Murakami, Y., Noshi, K., Fujita, K., Tsuji, M. and Takewaki, I. (2013), "Simultaneous optimal damper placement using oil, hysteretic and inertial mass dampers", Earthq. Struct., 5(3), 261-276.
DOI
|
14 |
Kim, J., Choi, H. and Min, K. (2011), "Use of rotational friction dampers to enhance seismic and progressive collapse resisting capacity of structures", Struct. Des. Tall Spec. Build., 20(4), 515-537.
DOI
|
15 |
Lee, S.K., Park, J.H., Moon, B.W., Min, K.W., Lee, S.H. and Kim, J. (2008), "Design of a bracing-friction damper system for seismic retrofitting", Smart Struct. Syst., 4(5), 685-696.
DOI
|
16 |
Marshall, J.D. and Charney, F.A. (2012), "Seismic response of steel frame structures with hybrid passive control systems", Earthq. Eng. Struct. Dyn., 41(4), 715-733.
DOI
|
17 |
Oh, S.H., Kim, Y.J. and Ryu, H.S. "Seismic performance of steel structures with slit dampers", Eng. Struct., 31(9), 1997-2008.
DOI
|
18 |
Patel, C.C. and Jangid, R.S. (2011), "Dynamic response of adjacent structures connected by friction dampers", Earthq. Struct., 2(2), 149-169.
DOI
|
19 |
Perform 3D (2006), Computer and Structures, Inc. PERFORM User Guide ver 4.
|
20 |
Suresh, G. and Andy, R. (1991), "Planar sliding with dry friction Part 2. Dynamics of motion", Wear, 20(2), 331-352.
|
21 |
Tsai, C.S., Chen, K.-C. and Chen, C.-S. (1998), "Seismic resistibility of high-rise buildings with combined velocity-dependent and velocity-independent devices", ASME Pressure Vessels and Piping Conference, San Diego, CA.
|
22 |
Tremblay, R., Chen, L. and Tirca, L. (2014), "Enhancing the seismic performance of multi-storey buildings with a modular tied braced frame system with added energy dissipating devices", Int. J. High-Rise Build., 3(1), 21-33.
|
23 |
Uetani, K., Tsuji, M. and Takewaki, I. (2003), "Application of optimum design method to practical building frames with viscous dampers and hysteretic dampers", Eng. Struct., 25(5), 579-592.
DOI
|