1 |
AISC-ASD (1989), Manual of steel construction, allowable stress design, Chicago (IL): American Institute of Steel Construction.
|
2 |
Al-Ali, A. and Krawinkler, H. (1998), "Effects of vertical irregularities on seismic behavior of building structures", Report No. 130, Blume Earthquake Engineering Center, Stanford University.
|
3 |
Aydinoglu, M.N. (2003), "An incremental response spectrum analysis procedure on inelastic spectral displacements for multi-mode seismic performance evaluation", Bull. Earthq. Eng., 1(1), 3-36.
DOI
|
4 |
BSSC (Building Seismic Safety Council) (2000), Pre-standard and commentary for the seismic rehabilitation of buildings, FEMA-356, Washington (DC): Federal Emergency Management Agency.
|
5 |
Chintanapakdee, C. and Chopra, A. (2003), "Evaluation of the modal pushover analysis procedure using vertically regular and irregular generic frames", A Report on Research Conducted Under Grant No. CMS-9812531.
|
6 |
Chintanapakdee, C. and Chopra, A. (2004), "Seismic response of vertically irregular frames: Response history and modal pushover analyses", J. Struct. Eng., ASCE, 130(8), 1177-1185.
DOI
|
7 |
Chopra, A.K. and Goel, R.K. (2002), "A modal pushover analysis procedures for estimating seismic demands for buildings", Earthq. Eng. Struct. Dyn., 31(3), 561-582.
DOI
|
8 |
Chopra, A.K. and Goel, R.K. (2004), "A modal pushover analysis procedure to estimate seismic demand for unsymmetric-plan buildings", Earthq. Eng. Struct. Dyn., 33(8), 903-927.
DOI
|
9 |
Chopra, A.K. and Chintanapakdee, C. (2004b), "Evaluation of modal and FEMA pushover analyses: Vertically regular and irregular generic frames", Earthq. Spectra, 20(1), 255-271.
DOI
|
10 |
Computers & Structures Incorporated (CSI) (2004), SAP 2000 NL, Berkeley, CA, USA.
|
11 |
Dutta, S.C. and Das, P.K. (2002), "Inelastic seismic response of code-designed reinforced concrete asymmetric buildings with strength degradation", Eng. Struct., 24(10), 1295-1314.
DOI
|
12 |
Duan, X.N. and Chandler, A.M. (1995), "Seismic torsional response and design procedures for a class of setback frame buildings", Earthq. Eng. Struct. Dyn., 24(5), 761-777.
DOI
|
13 |
Ebrahimi Nezhad, M. (2011), "Seismic evaluation of vertically irregular tall building frames considering the effects of higher modes", MSc. thesis, Sahand University of Technology. (in Persian)
|
14 |
Fragiadakis, M., Vamvatsikos, D. and Papadrakakis, M. (2006), "Evaluation of the influence of vertical irregularities on the seismic performance of a nine-story steel frame", Earthq. Eng. Struct. Dyn., 35(12), 1489-1509.
DOI
|
15 |
ICC (2000), International Building Code 2000, ICC: Falls Church, VA.
|
16 |
Kreslin, M. and Fajfar, P. (2011), "The extended N2 method taking into account higher mode effects in elevation", Earthq. Eng. Struct. Dyn., 40(14), 1571-1589.
DOI
|
17 |
Jan, T.S., Liu, M.W. and Kao, Y.C. (2004), "An upper-bound pushover analysis procedure for estimating the seismic demands of high-rise buildings", Eng. Struct., 26(1), 117-128.
DOI
|
18 |
Kalkan, E. and Kunnath, S.K. (2006), "Adaptive modal combination procedure for nonlinear static analysis of building structures", J. Struct. Eng., 132(11), 1721-1731.
DOI
|
19 |
Karavasilis, T.L., Bazeos, N. and Beskos, D.E. (2008), "Estimation of seismic inelastic deformation demands in plane steel MRF with vertical mass irregularities", Eng. Struct., 30(11), 3265-3275.
DOI
ScienceOn
|
20 |
Kreslin, M. and Fajfar, P. (2012), "The extended N2 method considering higher mode effects in both plan and elevation", Bull. Earthq. Eng., 10(2), 695-715.
DOI
|
21 |
Le-Trung, K., Lee, K., Lee, J. and Lee, D.H. (2010), "Evaluation of seismic behavior of steel special moment frame buildings with vertical irregularities", Struct. Des. Tall Spec. Build., doi: 10.1002/tal.588.
DOI
|
22 |
National Earthquake Hazards Reduction Program (NEHRP) (2009), Recommended Seismic Provisions for New Buildings and Other Structures, FEMA P-750, Washington (DC). Federal Emergency Management Agency.
|
23 |
Poursha, M., Khoshnoudian, F. and Moghadam, A.S. (2009), "A consecutive modal pushover procedure for estimating the seismic demands of tall buildings", Eng. Struct., 31(2), 591-599.
DOI
ScienceOn
|
24 |
Poursha, M., Khoshnoudian, F. and Moghadam, A.S. (2011), "A consecutive modal pushover procedure for nonlinear static analysis of one-way unsymmetric-plan tall building structures", Eng. Struct., 33(9), 2417-2434.
DOI
|
25 |
Reyes, J.C. and Chopra, A. (2011a), "Three-dimensional modal pushover analysis of buildings subjected to two components of ground motion, including its evaluation for tall buildings", Earthq. Eng. Struct. Dyn., 40(7), 789-806.
DOI
|
26 |
Poursha, M., Khoshnoudian, F. and Moghadam, A.S. (2014), "The extended consecutive modal pushover procedure for estimating the seismic demands of two-way unsymmetric-plan tall buildings under influence of two horizontal components of ground motions", Soil Dyn. Earthq. Eng., 63, 162-173.
DOI
|
27 |
Poursha, M. and Amini, M.A. (2015), "A single-run multi-mode pushover procedure to account for the effect of higher modes in estimating the seismic demands of tall buildings", Bull. Earthq. Eng., 13(8), 2347-2365.
DOI
|
28 |
Poursha, M. and Talebi Samarin, E. (2015), "The modified and extended upper-bound (UB) pushover method for the multi-mode pushover analysis of unsymmetric-plan tall buildings", Soil Dyn. Earthq. Eng., 71, 114-127.
DOI
|
29 |
Reyes, J.C. and Chopra, A. (2011b), "Evaluation of three-dimensional modal pushover analysis for unsymmetric-plan buildings subjected to two components of ground motion", Earthq. Eng. Struct. Dyn., 40(13), 1475-1494.
DOI
|
30 |
Salawdeh, Suhaib (2009), "Displacement based design of vertically irregular frame frame-wall structures", MSc. Thesis, Rose School.
|
31 |
Standard No. 2800-05 (2005), Iranian code of practice for seismic resistant design of buildings, 3rd edition, Building and Housing Research Centre, Iran.
|
32 |
Shakeri, K., Shayanfar, M.A. and Kabeyasawa, T. (2010), "A story shear-based adaptive pushover procedure for estimating seismic demands of buildings", Eng. Struct., 32(1), 174-183.
DOI
ScienceOn
|
33 |
Valmundsson, E.V. and Nau, J.M. (1997), "Seismic response of building frames with vertical structural irregularitie", J. Struct. Eng., 123(1), 30-41.
DOI
|
34 |
Shakeri, K., Tarbali, K. and Mohebbi, M. (2012), "An adaptive modal pushover procedure for asymmetricplan buildings", Eng. Struct., 36, 160-172.
DOI
|