1 |
Balsamo, A., Colombo, A., Manfredi, G., Negro, P. and Prota, A. (2005), "Seismic behaviour of a full-scale RC frame repaired using CFRP laminates", Eng. Struct., 27(5), 769-780.
DOI
|
2 |
Baratta, A. and Corbi, I. (2012), "FRP composited retrofitting for protection of monumental and ancient constructions", Open Constr. Build. Technol. J., 6, 361-367.
DOI
|
3 |
Baratta, A., Corbi, I., Corbi, O., Barros, R.C. and Bairrao, R. (2012), "Shaking table experimental researches aimed at the protection of structures subject to dynamic loading", Open Constr. Build. Technol. J., 6, 355-360.
DOI
|
4 |
Calvi, G.M. (2013), "Choices and criteria for seismic strengthening", J. Earthq. Eng., 17(6), 769-802.
DOI
|
5 |
Christopoulos, C. and Filiatrault, A. (2006), Principles of passive supplemental damping and seismic isolation, IUSS Press, Istituto Universitario di Studi Superiori di Pavia, Italy.
|
6 |
CNR-DT 200 (2004), Guide for the design and construction of externally bonded FRP systems for strengthening existing structures, National Research Council, Advisory Committee on technical recommendations for construction.
|
7 |
Di Ludovico, M., Prota, A., Manfredi, G. and Cosenza, E. (2008), "Seismic strengthening of an underdesigned rc structure with FRP", Earthq. Eng. Eng. Vib., 37, 141-162.
|
8 |
Eurocode 8 (2004), Design of Structures for Earthquake Resistance - Part 3: Assessment and retrofitting of buildings, C.E.N., European Committee for Standardization.
|
9 |
FEMA 356, Federal Emergency Management Agency (2000), Prestandard and commentary for the seismic rehabilitation of buildings, American Society of Civil Engineers, Reston, Virginia.
|
10 |
Ferracuti, B., Savoia, M., Pinho, R. and Francia, R. (2006), "Pushover analyses of FRP retrofitted RC frames", First ECEES, Geneva, Switzerland.
|
11 |
Filippou, F.C., Popov, E.P. and Bertero, V.V. (1983), "Modelling of R/C joints under cyclic excitations", J. Struct. Eng., 109(11), 2666-2684.
DOI
|
12 |
Gasparini, D. and Vanmarcke, E. (1976), "Simulated earthquake motions compatible with prescribed response spectra", Massachusetts Institute of Technology, Department of Civil Engineering, USA.
|
13 |
Iervolino, I., Maddaloni, G. and Cosenza, E. (2008), "Eurocode 8 compliant record sets for seismic analysis of structures", J. Earthq. Eng., 12(1), 54-90.
DOI
|
14 |
Mainstone, R.J. (1974), "Supplementary note on the stiffness and strength of infilled frames", Current Paper CP13/74, Building Research Establishment, London.
|
15 |
Mazza, F. and Vulcano, A. (2007), "Control of the along-wind response of steel framed buildings by using viscoelastic or friction dampers", Wind Struct., 10(3), 233-247.
DOI
|
16 |
Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Eng., ASCE, 114(8), 1804-1826.
DOI
|
17 |
Martinez-Rueda, J.E. and Elnashai, A.S. (1997), "Confined concrete model under cyclic load", Mater. Struct., 30(197), 139-147.
DOI
|
18 |
Mazza, F. (2014), "Modeling and nonlinear static analysis of reinforced concrete framed buildings irregular in plan", Eng. Struct., 80, 98-108.
DOI
|
19 |
Mazza, F. and Vulcano, A. (2008a), "Displacement-based seismic design procedure for framed buildings with dissipative braces. Part I: Theoretical formulation", In 2008 Seismic Engineering International Conference commemorating the 1908 Messina and Reggio Calabria Earthquake (MERCEA08), Reggio Calabria (Italy), American Institute of Physics Conference Proceedings, USA.
|
20 |
Mazza, F. and Vulcano, A. (2008b), "Displacement-based seismic design procedure for framed buildings with dissipative braces. Part II: Numerical results", In 2008 Seismic Engineering International Conference commemorating the 1908 Messina and Reggio Calabria Earthquake (MERCEA08), Reggio Calabria (Italy), American Institute of Physics Conference Proceedings, USA.
|
21 |
Mazza, F. and Vulcano A. (2011), "Sistemi di controllo passivo delle vibrazioni. Progettazione sismoresistente di edifici in cemento armato", Citta Studi Edizioni, Novara (Italy), 11, 525-575. (in Italian)
|
22 |
Mazza, F. and Vulcano, A. (2012), "Effects of near-fault ground motions on the nonlinear dynamic response of base-isolated RC framed buildings", Earthq. Eng. Struct. Dyn., 41(2), 211-232.
DOI
|
23 |
Mazza, F., Vulcano, A. and Mazza, M. (2012), "Nonlinear dynamic response of rc buildings with different base-isolation systems subjected to horizontal and vertical components of near-fault ground motions", Open Constr. Build. Technol. J., 6, 373-383.
DOI
|
24 |
Mazza, F. and Vulcano, A. (2013), "Nonlinear seismic analysis to evaluate the effectiveness of damped braces", Int. J. Mech., 7(3), 251-261.
|
25 |
Mazza, F. and Vulcano, A. (2014a), "Design of hysteretic damped braces to improve the seismic performance of steel and RC framed structures", Int. J. Earthq. Eng., 31(1), 1-12.
|
26 |
Mazza, F. and Vulcano, A. (2014b), "Equivalent viscous damping for displacement-based seismic design of hysteretic damped braces for retrofitting framed buildings", Bull. Earthq. Eng., 12(6), 2797-2819.
DOI
|
27 |
Menegotto, M. and Pinto, P.E. (1973), "Method of analysis for cyclically loaded reinforced concrete plane frames including changes in geometry and nonelastic behavior of elements under combined normal force and bending", In IABSE Symposium on Resistance and Ultimate Deformability of Structures Acted on by Well Defined Repeated Loads, Lisbon.
|
28 |
Monti, G. and Nuti, C. (1992), "Nonlinear cyclic behaviour of reinforcing bars including buckling", J. Struct. Eng., 118(12), 3268-3284.
DOI
|
29 |
Mpampatsikos, V., Nascimbene, R. and Petrini, L. (2008), "A critical review of the RC frame existing building assessment procedure according to Eurocode 8 and Italian seismic code", J. Earthq. Eng., 12(S1), 52-82.
DOI
|
30 |
Naeim, F. and Kelly, J.M. (1999), Design of seismic isolated structures: from theory to practice, John Wiley & Sons Ltd., New York, USA.
|
31 |
Royal Decree-Law No. 640 (1935), New text of the Technical Building Regulations, with special prescriptions for localities affected by earthquakes 1935. (in Italian)
|
32 |
Oliveto, G. and Marletta, M. (2005), "Seismic retrofitting of reinforced concrete buildings using traditional and innovative techniques", ISET J. Earthq. Technol., 42(2-3), 21-46.
|
33 |
Ponzo, F.C., Di Cesare, A., Nigro, D., Vulcano, A., Mazza, F., Dolce, M. and Moroni, C. (2012), "JET-PACS project: dynamic experimental tests and numerical results obtained for a steel frame equipped with hysteretic damped chevron braces", J. Earthq. Eng., 16(5), 662-685.
DOI
|
34 |
Romao, X., Delgado, R. and Costa, A. (2010), "Practical aspects of demand and capacity evaluation of RC members in the context of EC8-3", Earthq. Eng. Struct. Dyn., 39(5), 473-499.
DOI
|
35 |
Royal Decree-Law No. 2105 (1937), Technical Building Regulations, with special prescriptions for localities affected by earthquakes. (in Italian)
|
36 |
Royal Decree-Law No. 2229 (1939), Regulations for the construction of not reinforced and reinforced buildings 1939. (in Italian)
|
37 |
SeismoStruct (2010), A computer program for static and dynamic nonlinear analysis of framed structures, available from URL: http//www.seismosoft.com.
|
38 |
Sorace, S. and Terenzi, G. (2008), "Seismic protection of frame structures by fluid viscous damped braces", J. Struct. Eng., ASCE, 134(1), 45-55.
DOI
|
39 |
NTC08 (2008), Technical Regulations for the Constructions, Italian Ministry of the Infrastructures. (in Italian)
|
40 |
Thermou, G.E. and Elnashai, A.S. (2006), "Seismic retrofit schemes for rc structures and local-global consequences", Prog. Struct. Eng. Mater., 8(1), 1-15.
DOI
|
41 |
Tirca, L.D., Foti, D. and Diaferio, M. (2003), "Response of middle-rise steel frames with and without passive dampers to near-field ground motions", Eng. Struct., 25(2), 69-179.
DOI
|