1 |
AASHTO (2002), Standard Specifications for Highway Bridges, 17th Edition, Washington, DC., USA.
|
2 |
Ayoub, E.F. and Helmy, G. (2000), "Modeling of the elastomeric bearings for the seismic analysis of precast girder bridges", Bridge Engineering Conference, Sharm-ElSheikh, Sinai, Egypt.
|
3 |
Aviram, A., Mackie, K.R. and Stojadinovic, B. (2008), "Effect of abutment modeling on the seismic response of bridge structures", Earthq. Eng. Eng. Vib., 7(4), 395-402.
DOI
|
4 |
Bandyopadhyay, N., Ghoshal, A. and Sengupta, A. (2010), "Relevance of bearings and expansion joints - case studies for indeterminate bridges", IABSE-JSCE Joint Conference on Advances in Bridge Engineering-II, Dhaka, Bangladesh.
|
5 |
Buckle, I.G., Constantinou, M.C., Dicleli, M. and Ghasemi H. (2006), "Seismic isolation of highway bridges", Special Report MCEER-06-SP07, Buffalo, NY.
|
6 |
California Department of Transportation (CalTrans) (1999), "Bridge Memo to Designers(20-1)", Seismic Design Methodology, California Department of Transportation, Sacramento, CA.
|
7 |
Caltrans (SDC) (2009), Seismic Design Criteria, Version 1.5.
|
8 |
Charney, F.A. (2008), "Unintended consequences of modeling damping in structures", J. Struct. Eng., ASCE, 134(4), 581-592.
DOI
|
9 |
DesRoches, R. and Muthukumar, S. (2002), "Effect of pounding and restrainers on seismic response of multi-frame bridges", J. Struct. Eng., ASCE, 128(7), 860-869.
DOI
|
10 |
Dicleli, M. (2002), "Seismic design of lifeline bridge using hybrid seismic isolation", J. Bridge Eng., ASCE, 7(2), 94-103.
DOI
|
11 |
EN 1992-1-1 Eurocode 2 (2004), Design of Concrete Structures. Part 1-1: General Rules and Rules for Buildings, ComiteEuropeen de Normalisation, Brussels, Belgium.
|
12 |
EN 1992-2 Eurocode 2 (2005), Design of Concrete Structures. Part 2: Concrete Bridges - Design and Detailing Rules, ComiteEuropeen de Normalisation, Brussels, Belgium.
|
13 |
EN 1998-1 Eurocode 8 (2005), Design of Structures for Earthquake Resistance. Part 1: General Rules, Seismic Actions and Rules for Buildings, ComiteEuropeen de Normalisation, Brussels, Belgium.
|
14 |
EN 1998-2 Eurocode 8 (2005), Design of Structures for Earthquake Resistance, Part 2: Bridges, ComiteEuropeen de Normalisation, Brussels, Belgium.
|
15 |
Farag, M.M.N. (2013), "Inelastic seismic response of bridges with a buffer-gap-elastomeric bearing system", MSc. Thesis, Faculty of Engineering, Cairo University.
|
16 |
Imbsen, R.A. (2006), "Recommended LRFD guidelines for the seismic design of highway bridges", prepared as part of NCHRP, Project 20-07, Task 193, TRB.
|
17 |
Guirguis, J.E.B. and Mehanny, S.S.F. (2013), "Evaluating codes criteria for regular seismic behavior of continuous concrete box girder bridges with unequal height piers", J. Bridge Eng., ASCE, 18(6), 486-498.
DOI
|
18 |
Hindi, R. and Dicleli, M. (2006), "Effect of modifying bearing fixities on the seismic response of short- to medium-length bridges with heavy substructures", Earthq. Spectra, 22(1), 65-84.
DOI
|
19 |
Ibarra, L.F. and Krawinkler, H. (2005), "Global collapse of frame structures under seismic excitations", Blume Center Report No. 152, School of Civil and Environmental Engineering, Stanford University, CA.
|
20 |
Japan Road Association (JRA) (1997), Manual for seismic design of highway bridges, Tokyo, Japan.
|
21 |
Japan Road Association (JRA) (2002), "Chapter 1 seismic design specifications for highway bridges", International Institute of Seismology and Earthquake Engineering, Tokyo, Japan.
|
22 |
Karsan, I.D. and Jirsa, J.O. (1969), "Behavior of concrete under compressive loading", J. Struct. Div., ASCE, 95(ST12), 2543-2563.
|
23 |
Konstantinidis, D., Kelly, J.M. and Makris, N. (2009), "Experimental investigation on the seismic response of bridge bearings", 3rd International Conference on Advances in Experimental Structural Engineering, San Francisco, CA.
|
24 |
Kunde, M.C. and Jangid, R.S. (2006), "Effects of pier and deck flexibility on the seismic response of isolated bridges", J. Bridge Eng., ASCE, 11(1), 109-121.
DOI
|
25 |
Mehanny, S.S.F. and Ayoub, A.S. (2008), "Variability in inelastic displacement demands: Uncertainty in system parameters versus randomness in ground records", Eng. Struct., 30(4), 1002-1013.
DOI
|
26 |
Mackie, K.R. and Stojadinovic, B. (2005), "Fragility basis for California highway overpass bridge seismic decision making", PEER Report 2005/02, University of California, Berkeley, CA, USA.
|
27 |
Manos, G.C., Mitoulis, S.A. and Sextos, A.G. (2011), "Preliminary design of seismically isolated R/C highway overpasses - features of relevant software and experimental testing of elastomeric bearings", COMPDYN 2011, III ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Corfu, Greece.
|
28 |
Medina, R. (2002), "Seismic demands for non-deteriorating frame structures and their dependence on ground motions", Ph.D. Thesis, Department of Civil and Environmental Engineering, Stanford University, CA, USA.
|
29 |
Mehanny, S.S.F. (2009), "A broad-range power-law form scalar-based seismic intensity measure", Eng. Struct., 31(7), 1354-1368.
DOI
|
30 |
Mitoulis, S.A. (2013), "Bridges with fixities and bearings versus isolated sytems", Proceedings of the 4th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Kos Island, Greece.
|
31 |
Mitoulis, S.A. and Tegos, I.A. (2010), "Restrain of a seismically isolated bridge by external stoppers", Bull. Earthq. Eng., 8(4), 973-993.
DOI
|
32 |
Monzon, E.V., Wei, C., Buckle, I.G. and Itani, A. (2012), "Seismic response of full and hybrid isolated curved bridges structures", ASCE Congress, Chicago, Illinois, USA.
|
33 |
South Carolina Department of Transporation (SCDOT) (2008), "Seismic design specifications for highway bridges", version 2.0, SCDOT,Columbia, SC.
|
34 |
OpenSees 2.0.0 [Computer software], Berkeley, CA, Pacific Earthqakes Engineering Response Center, University of California.
|
35 |
Psycharis, I.N. and Mageirou, G.E. (2003), "Parametric investigation of the inelastic seismic response of bridges with elastomeric bearings combined with stoppers", fib Symposium on Concrete Structures in Seismic Regions, Athens, Greece.
|
36 |
Scott, B.D., Park, R. and Priestley, M.J.N. (1982), "Stress-strain behavior of concrete confined by overlapping hoops at low and high strain rates", ACI J., 79(1), 13-27.
|
37 |
Stefanidou, S.P. and Kappos, A.J. (2013), "Optimum selection of retrofit measures for R/C bridges using fragility curves", Proceeding of the 4th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Kos Island, Greece.
|
38 |
Wang, K., Wei, H. and Li, Q. (2012), "Philosophies on seismic design of highway bridge with small or medium span", Proceedings of 15th WCEE - World Conference on Earthquake Engineering, Lisbon, Portugal.
|
39 |
Yilmaz, T. (2008), "Seismic response of multi-span highway bridges with two-column reinforcement concrete bents including foundation and column flexibility", MSc. Thesis, Middle East Technical University, Turkey.
|