Browse > Article
http://dx.doi.org/10.12989/eas.2015.8.5.957

Correlation of elastic input energy equivalent velocity spectral values  

Cheng, Yin (Department of Structural and Geotechnical Engineering, Sapienza University of Rome)
Lucchini, Andrea (Department of Structural and Geotechnical Engineering, Sapienza University of Rome)
Mollaioli, Fabrizio (Department of Structural and Geotechnical Engineering, Sapienza University of Rome)
Publication Information
Earthquakes and Structures / v.8, no.5, 2015 , pp. 957-976 More about this Journal
Abstract
Recently, two energy-based response parameters, i.e., the absolute and the relative elastic input energy equivalent velocity, have been receiving a lot of research attention. Several studies, in fact, have demonstrated the potential of these intensity measures in the prediction of the seismic structural response. Although some ground motion prediction equations have been developed for these parameters, they only provide marginal distributions without information about the joint occurrence of the spectral values at different periods. In order to build new prediction models for the two equivalent velocities, a large set of ground motion records is used to calculate the correlation coefficients between the response spectral values corresponding to different periods and components of the ground motion. Then, functional forms adopted in models from the literature are calibrated to fit the obtained data. A new functional form is proposed to improve the predictions of the considered models from the literature. The components of the ground motion considered in this study are the two horizontal ones only. Potential uses of the proposed equations in addition to the prediction of the correlation coefficients of the equivalent velocity spectral values are shown, such as the prediction of derived intensity measures and the development of conditional mean spectra.
Keywords
correlation coefficient; input energy equivalent velocity spectra; conditional mean spectrum;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Abrahamson, N.A., Kammerer, A. and Gregor, N. (2003), "Summary of scaling relations for spectral damping, peak velocity, and average spectral acceleration", Report for the PEGA-SOS project, Personal communication.
2 Akaike, H. (1974), "A new look at the statistical model identification", IEEE Trans. Automatic Control, 19(6), 716-723.   DOI
3 Akiyama, H. (1985), Earthquake resistant limit-state design for buildings, Univ. Tokyo Press, Tokyo.
4 Baker, J. (2011), "Conditional mean spectrum: tool for ground-motion selection", J. Struct. Eng., 137(3), 322-331.   DOI   ScienceOn
5 Baker, J. and Cornell, C.A. (2006a), "Correlation of response spectral values for multicomponent ground motions", Bull. Seismol. Soc. Am., 96(1), 215-227.   DOI
6 Baker, J. and Cornell, C.A. (2006b), "Spectral shape, epsilon and record selection", Earthq. Eng. Struct. Dyn., 35(9), 1077-1095.   DOI   ScienceOn
7 Baker, J. and Jayaram, N. (2008), "Correlation of spectral acceleration values from NGA ground motion models", Earthq. Spectra, 24(1), 299-317.   DOI
8 Benavent-Climent, A., Lopez-Almansa, F. and Bravo-Gonzalez, D.A. (2010), "Design energy input spectra for moderate-to-high seismicity regions based on Colombian earthquakes", Soil Dyn. Earthq. Eng., 30(11), 1129-1148.   DOI
9 Bertero, V.V. and Uang, C.M. (1992), Issues and future directions in the use of energy approach for seismic-resistant design of structures, Nonlinear seismic analysis of reinforced concrete buildings, Elsevier, London.
10 Bradley, A.B., Cubrinovski, M., MacRae, G.A. and Dhakal, R.P. (2009), "Ground-motion prediction equation for SI based on spectral acceleration equations", Bull. Seismol. Soc. Am., 99(1), 277-285.   DOI
11 Chai, R.Y.H. and Fajfar, P.A. (2000), "Procedure for estimating input energy spectra for seismic design", J. Earthq. Eng., 4(4), 539-561.   DOI
12 Chapman, M.C. (1999), "On the use of elastic input energy for seismic hazard analysis", Earthq. Spectra, 15(4), 607-635.   DOI
13 Cheng, Y., Lucchini, A. and Mollaioli, F. (2014), "Proposal of new ground-motion prediction equations for elastic input energy spectra", Earthq. Struct., 7(4), 485-510.   DOI
14 Chou, C.C. and Uang, C.M. (2000), "Establishing absorbed energy spectra-an attenuation approach", Earthq. Eng. Struct. Dyn., 29(10), 1441-1455.   DOI
15 Decanini, L.D. and Mollaioli, F. (1998), "Toward the definition of the relation between hysteretic and input energy", Proceeding of 6th U.S. National Conference on Earthquake Engineering, EERI, Oakland, California.
16 Chou, C.C. and Uang, C.M. (2003), "A procedure for evaluation of seismic energy demand of framed structures", Earthq. Eng. Struct. Dyn., 32(2), 229-244.   DOI
17 Cimellaro, G.P. (2013), "Correlation in spectral acceleration for earthquakes in Europe", Earthq. Eng. Struct. Dyn., 42(4), 623-633.   DOI   ScienceOn
18 Danciu, L. and Tselentis, G.A. (2007), "Engineering ground-motion parameters attenuation relationships for Greece", Bull. Seismol. Soc. Am., 97(1), 162.   DOI
19 Decanini, L.D. and Mollaioli, F. (2001), "An energy-based methodology for the assessment of seismic demand", Soil Dyn. Earthq. Eng., 21(2), 113-137.   DOI
20 Fajfar, P. and Fischinger, M. (1990), "A seismic procedure including energy concept", Proceedings of IX ECEE, Moscow, September.
21 Fajfar, P. and Vidic, T. (1994), "Consistent inelastic design spectra: hysteretic and input energy", Earthq. Eng. Struct. Dyn., 23(5), 523-537.   DOI
22 Gong, M.S. and Xie, L.L. (2005), "Study on comparison between absolute and relative input energy spectra and effects of ductility factor", Acta. Seismol. Sinic., 18(6), 717-726.   DOI
23 Haselton, C.B., Baker, J.W., Bozorgnia, Y., Goulet, C.A., Kalkan, E., Luco, N., Shantz, T., Shome, N., Stewart, J.P., Tothong, P., Watson-Lamprey, J. and Zareian, F. (2009), "Evaluation of ground motion selection and modification methods: Predicting median interstory drift response of buildings", PEER Report 2009/01 College of Engineering University of California, Berkeley.
24 Lopez-Almansa, F., Yazgan, A. and Benavent-Climent, A. (2013), "Design energy input spectra for high seismicity regions based on turkish registers", Bull. Earthq. Eng., 11(4), 885-912.   DOI
25 Housner, G.W. (1952), "Spectrum intensities of strong motion earthquakes", Proceedings of Symposium of earthquake and blast effects on structures, EERI, Los Angeles, California.
26 Jayaram, N., Mollaioli, F., Bazzurro, P., De Sortis, A. and Bruno, S. (2010), "Prediction of structural response of reinforced concrete frames subjected to earthquake ground motions", 9th U.S. National and 10th Canadian Conference on Earthquake Engineering, Toronto, Canada.
27 Krawinkler, H. (1987), "Performance assessment of steel components", Earthq. Spectra, 3(1), 27-41.   DOI
28 Lucchini, A., Mollaioli, F. and Monti, G. (2011), "Intensity measures for response prediction of a torsional building subjected to bi-directional earthquake ground motion", Bull. Earthq. Eng., 9(5), 1499-1518.   DOI
29 Luco, N., Manuel, L, Baldava, S. and Bazzurro, P. (2005), "Correlation of damage of steel moment-resisting frames to a vector-valued ground motion parameter set that includes energy demands", Proceedings of the 9th International Conference on Structural Safety and Reliability, ICOSSAR05.
30 Manfredi, G. (2001), "Evaluation of seismic energy demand", Earthq. Eng. Struct. Dyn., 30(4), 485-499.   DOI
31 Decanini, L.D. and Mollaioli, F. (2001), "An energy-based methodology for the assessment of seismic demand", Soil Dyn. Earthq. Eng., 21(2), 113-137.   DOI
32 McCabe, S.L. and Hall, W.J. (1989), "Assessment of seismic structural damage", J. Struct. Eng., 115(9), 2166-2183.   DOI
33 Neter, J., Kutner, M.H., Nachtsheim, C.J. and Wasserman, W. (1996), Applied linear statistical models, MacGraw-Hill, Boston, Massachusetts, USA.
34 Mollaioli, F., Bruno, S., Decanini, L. and Saragoni, R. (2011), "Correlation between energy and displacment demand for performance-based seismic engineering", Pure Appl. Geophys., 168(2011), 237-259.   DOI
35 Yakut, A. and Yilmaz, H. (2008), "Correlation of deformation demands with ground motion intensity", J. Struct. Eng., 134(12), 1818-1828.   DOI
36 Mollaioli, F., Lucchini, A., Cheng, Y. and Monti, G. (2013), "Intensity measures for the seismic response prediction of base-isolated buildings", Bull. Earthq. Eng., 11(5), 1841-1866.   DOI
37 Teran-Gilmore, A. (1996), "Performance-based earthquake-resistant design of framed buildings using energy concepts", Ph.D. Dissertation, Department of Civil Engineering, University of California at Berkeley.
38 Uang, C.M. and Bertero, V.V. (1990), "Evaluation of seismic energy in structures", Earthq. Eng. Struct. Dyn., 19(1), 77-90.   DOI