Browse > Article
http://dx.doi.org/10.12989/eas.2014.7.5.861

Seismic behavior evaluation of exterior beam-column joints with headed or hooked bars using nonlinear finite element analysis  

Rajagopal, S. (Department of Civil Engineering, Mepco Schlenk Engineering College)
Prabavathy, S. (Department of Civil Engineering, Mepco Schlenk Engineering College)
Kang, Thomas H.K. (Department of Architecture and Architectural Engineering, Seoul National University)
Publication Information
Earthquakes and Structures / v.7, no.5, 2014 , pp. 861-875 More about this Journal
Abstract
This paper studies the response of seismic behavior of reinforced concrete exterior beam-column joints under reversal loading with different anchorages and joint core details. The joint core was detailed without much confinement (group-I) and/or with proposed X-cross bars in the core (group-II). The beam longitudinal reinforcement's anchorages were designed as per ACI 352 (headed bars), ACI 318 (conventional $90^{\circ}$ bent hooks) and IS 456 ($90^{\circ}$ bent hooks with extended tails). The nonlinear finite element analysis response of the beam-column joints was studied, along with initial and progressive cracks up to failure. The experimental and analytical results were compared and presented in this paper to make more scientific conclusions.
Keywords
reinforced concrete; exterior beam-column joint; headed bars; hooked bars; nonlinear finite element analysis; crack;
Citations & Related Records
Times Cited By KSCI : 8  (Citation Analysis)
연도 인용수 순위
1 ACI 318 (2011), Building Code Requirements for Structural Concrete and Commentary, American Concrete Institute, Farmington Hills, Michigan.
2 ACI 352 (2002), Recommendations for Design of Beam-Column Connections in Monolithic Reinforced Concrete Structures, American Concrete Institute, Farmington Hills, Michigan.
3 Al-Taan, S.A. and Ezzadeen, N.A. (1995), "Flexural analysis of reinforced fibrous concrete members using the FE method", Comput. Struct., 56(6), 1065- 1072.   DOI   ScienceOn
4 ANSYS (2009), ANSYS Structural Analysis Guide, Canonsburg, Pennsylvania.
5 Ayoub, A. (2006), "Nonlinear analysis of reinforced concrete beam-columns with bond-slip", ASCE J. Eng. Mech., 132(11), 1177-1186.   DOI   ScienceOn
6 Baglin, P.S. and Scott, R.H. (2000), "Finite element modeling of reinforced concrete beam-column connection", ACI Struct. J., 97(6), 886-894.
7 Dahmani, L., Khennane, S. and Kaci, S. (2010), "Crack identification in reinforced concrete beams using ANSYS", Strength Mater., 42(2), 232-240.   DOI
8 Bindhu, K.R., Jaya, K.P. and Manicka Selvam, V.K. (2008), "Seismic resistance of exterior beam-column joints non-conventional reinforcement detailing", Struct. Eng. Mech., 30(6), 733-761.   DOI   ScienceOn
9 Bindhu, K.R. and Jaya, K.P. (2010), "Strength and behaviour of exterior beam-column joints with diagonal cross bracing bars", Asian J. Civil Eng. (Building & Housing), 11(3), 397-410.
10 Chun, S.C., Lee, S.H., Kang, T.H.-K., Oh, B. and Wallace, J.W. (2007), "Mechanical anchorage in exterior beam-column joints subjected to cyclic loading", ACI Struct. J., 104(1), 102-113.
11 Hegger, J., Sherif, A. and Roeser, W. (2004), "Nonlinear finite element analysis of reinforced concrete beam-column connections", ACI Struct. J., 101(5), 604-614.
12 Ibrahim Ary, M. and Kang, T.H.-K. (2012), "Shear-strengthening of reinforced & prestressed concrete beams using FRP: part I - review of previous research," Int. J. Conc. Struct. Mater., 6(1), 41-47.   DOI
13 IS 1893 (2002), Criteria for Earthquake Resistant Design of Structures - Part 1 : General Provisions and Buildings, Bureau of Indian Standards, New Delhi, India.
14 Kachlakev, D.I., Miller, T., Yim, S., Chansawat, K. and Potisuk, T. (2001), Finite Element Modeling of Reinforced Concrete Structures Strengthened With FRP Laminates, Research Report, Oregon Department of Transportation, Oregon.
15 Kang, T.H.K., Ha, S.S. and Choi, D.U. (2010), "Bar pullout tests and seismic tests of small-headed bars in beam-column joints", ACI Struct. J., 107(1), 32-42.
16 Kang, T.H.-K., Howell, J., Kim, S. and Lee, D.J. (2012), "A state-of-the-art review on debonding failures of FRP laminates externally adhered to concrete," Int. J. Conc. Struct. Mater., 6(2), 123-134.   과학기술학회마을   DOI
17 Kang, T.H.-K. and Mitra, N. (2012), "Prediction of performance of exterior beam-column connections with headed bars subject to load reversal", Eng. Struct., 41, 209-217.   DOI   ScienceOn
18 Kang, T.H.-K., Shin, M., Mitra, N. and Bonacci, J.F. (2009), "Seismic design of reinforced concrete beam-column joints with headed bars", ACI Struct. J., 106(6), 868-877.
19 Kwak, H.G. and Filippou, F.C. (1997), "Nonlinear FE analysis of RC structures under monotonic loads", Comput. Struct., 65(1), 1-16.   DOI   ScienceOn
20 Park, S. and Mosalam, K.M. (2012), "Analytical model for predicting shear strength of unreinforced exterior beam-column joints", ACI Struct. J., 109(2), 149-160.
21 Lam, K. M., Kim, W., Van Zandt, M. and Kang, T.H.-K. (2011), "An experimental study of reinforced concrete beams with closely-spaced headed bars", Int. J. Conc. Struct. Mater., 5(2), 77-85.   과학기술학회마을   DOI   ScienceOn
22 Li, B. and Kulkarni, S. (2010), "Seismic behavior of reinforced concrete exterior wide beam-column joints", ASCE J. Struct. Eng., 136(1), 26-36.   DOI   ScienceOn
23 Rajagopal, S. and Prabavathy, S. (2013), "Study of exterior beam-column joint with different joint core and anchorage details under reversal loading", Struct. Eng. Mech. in-press.
24 Raongjant, W. and Jaig, M. (2008), "Finite element analysis on lightweight reinforced concrete shear wall with different web reinforcement", Proceedings of the 6th Prince of Songkla University Engineering Conference, Songkhla, India, May.
25 Shrestha, R., Smith, S.T. and Samali, B. (2013), "Finite element modeling of FRP-strengthened RC beam-column connections with ANSYS", Comput. Concr., 11(1), 1-20.   DOI   ScienceOn
26 Tavarez, F.A. (2001), "Simulation of behavior of composite grid reinforced concrete beams using explicit finite element methods", M.S. thesis, University of Wisconsin-Madison, Madison, Wisconsin.
27 Xing, G.H., Wu, T., Niu, D.T. and Liu, X. (2013), "Seismic behavior of reinforced concrete interior beam-column joints with beams of different depths", Earthq. Struct., 4(4), 429-449.   DOI   ScienceOn
28 Willam, K.J. and Warnke, E.P. (1974), "Constitutive model for triaxial behaviour of concrete, Seminar on concrete structures subjected to triaxial stresses", Proceedings of International IABSE Conference on Concrete Structures Subject to Tri-Axial Stresses, Bergamo, Italy.
29 Wolanski, J.A. (2004), "Flexural behavior of reinforced and prestressed concrete beam using finite element analysis", M.S. thesis, Marquette University, Milwaukee, Wisconsin.
30 Xilin, L., Tonny, H.U., Sen, L. and Fangshu, L. (2012), "Seismic behavior of interior RC beam-column joints with additional bars under cyclic loading", Earthq. Struct., 3(1), 37-57.   DOI
31 IS 456 (2000), Plain and Reinforced Concrete - Code of Practice, Bureau of Indian Standards, New Delhi, India.