1 |
ATC (1996), Seismic evaluation and retrofit of concrete buildings, Vol.1, ATC-40, Applied Technology Council, Redwood City.
|
2 |
BSSC (1997), NEHRP guidelines for the seismic rehabilitation of buildings, FEMA-273, developed by ATC for FEMA, Washington, D.C.
|
3 |
Chopra, A.K., Goel, R.K. and Chintanapakdee, C. (2004), "Evaluation of a modified MPA procedure assuming higher modes as elastic to estimate seismic demands", Earthq. Spectra, 20(3), 757-778.
DOI
|
4 |
Fajfar, P. (1999), "Capacity spectrum method based on inelastic demand spectra", Earthq. Eng. Struct. Dyn., 28(9), 979-993.
DOI
|
5 |
Freeman, S.A., Nicoletti, J.P. and Tyrell, J.V. (1975), "Evaluations of existing buildings for seismic risk: a case study of Puget Sound Naval Shipyard, Bremerton, Washington", Proc. 1st US. National Conf. Earthq. Eng., EERI, Berkeley, 113-122.
|
6 |
Freeman, S.A. (1998), "Development and use of capacity spectrum method", Proc. 6th US. National Conf. Earthq. Eng., Seattle, CD-ROM, EERI, Oakland.
|
7 |
Gencturk B. and Elnashai, A.S. (2008), "Development and application of an advanced capacity spectrum method", Eng. Struct. 30(11), 3345-3354.
DOI
|
8 |
Guyader, A.C. and Iwan, W.D. (2006), "Determining equivalent linear parameters for use in a capacity spectrum method of analysis", J. Struct. Eng. - ASCE., 132(1), 59-67.
DOI
|
9 |
Hayashi, Y. (2002), "Evaluation of seismic design load based on equivalent-performance response spectra", Proc. of the 11th Japan Earthquake Engineering Symposium, 651-656. (in Japanese)
|
10 |
Hayashi, Y., Nii, A. and Morii, T. (2008), "Evaluation of building damage based on equivalent-performance response spectra", Proc. of the 14th World Conference on Earthquake Engineering, China.
|
11 |
Inoue, K. and Kuwahara, S. (1998), "Optimum strength ratio of hysteretic damper", Earthq. Eng. Struct. Dyn., 27(6), 577-588.
DOI
|
12 |
Kalkan, E. and Kunnath, S.K. (2006), "Adaptive modal combination procedure for nonlinear static analysis of building structures", J. Struct. Eng. - ASCE., 132(11), 1721-1731.
DOI
|
13 |
Lin, Y.Y. and Miranda, E. (2004), "Non-iterative capacity spectrum method based on equivalent linearization for estimating inelastic deformation demands of buildings", J. Struct. Mech. Earthq. Eng. - JSCE, 733(I-69), 113-119.
|
14 |
Newmark, N.M. and Hall, W.J. (1982), "Earthquake spectra and design", Earthquake Engineering Research Institute, Berkeley.
|
15 |
Seismic resistant design manual committee for wood buildings (2004), Seismic resistant design manual for wood buildings, Gakugei-shuppansya, Kyoto. (in Japanese)
|
16 |
Tani, T., Yoshitomi, S., Tsuji, M. and Takewaki, I. (2009), "High-performance control of wind-induced vibration of high-rise building via innovative high-hardness rubber damper", J. Struct. Design Tall Special Buildings, 18(7), 705-728.
DOI
|
17 |
Tsuji, M, Murata, S., Kim, H.G., Yoshitomi, S and Takewaki, I (2010), "Post-tensioning damper system for micro-vibration reduction in residential houses", J. Struct. Eng. AIJ, 56B, 171-178. (in Japanese)
|