Browse > Article
http://dx.doi.org/10.12989/mwt.2021.12.5.245

Behavior of nanobentonites in adsorption of cesium and strontium  

Ostovaritalab, Mohammad-Ali (Department of Chemical Engineering, Faculty of Engineering, University of Kashan)
Hayati-Ashtiani, Majid (Department of Chemical Engineering, Faculty of Engineering, University of Kashan)
Publication Information
Membrane and Water Treatment / v.12, no.5, 2021 , pp. 245-251 More about this Journal
Abstract
Bentonites contain a large amount of montmorillonite and this nano-structured and nano-porous member of the smectite group determines the adsorption properties of bentonites. In this study, four types of Iranian commercial bentonite clays have been examined to determine the adsorption capacity of cesium and strontium. The physicochemical and mineralogical properties of the four types have been experimentally analyzed with the focus on the moisture content, pH, dry (granulometric) and wet screen analyses; swell, sediment and Methylene Blue (M.B.) indices; cation exchange capacity (C.E.C) measurements. The pH and C.E.C values of B3 were 9.48 and 71.9 mEq/100g, respectively. The high values of C.E.C; swell, sediment and M.B. indices along with the high amount of granulometric values (particles finer than 36 ㎛) showed that the B3 had a high amount of montmorillonite. X-Ray Fluorescence (XRF) analysis showed that the major of competing cations such as Ca2+ and K+ existing in B2 affects the Sr adsorption. The experimental analysis also showed that B2 had almost high pH and C.E.C values as well. The results of the separation process of Cs and Sr indicate that the B3 and B2 have the highest adsorption capacity of 59.75 and 45.5 for Cs and Sr adsorption, respectively.
Keywords
adsorption; metal removal; montmorillonite; nano-structured bentonite;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 ASTM D 4381-84 (2001), Standard test method for sand content by volume of bentonite slurries, American Society for Testing and Materials; Pennsylvania, USA.
2 ASTM D 4972-1 (2001), Standard test method for pH of soils, American Society for Testing and Materials; Pennsylvania, USA.
3 Choi, J., Kang, C.H. and Whang, J. (2001), "Experimental assessment of nontreated bentonite as the buffer material of a radioactive waste repository", J. Environ. Sci. Health A, 36(5), 689-714. https://doi.org/10.1081/ESE-100103754.   DOI
4 Galambos, M., Kufcakova, J. and Rajec, P. (2009), "Sorption of strontium on Slovak bentonites", J. Radioanal. Nucl. Ch., 281(3), 347-357. https://doi.org/10.1007/s10967-009-0017-7. https://doi.org/10.1007/s10967-009-0017-7.   DOI
5 Abou-Lilah, R.A., Rizk, H.E., Elshorbagy, M.A., Gamal, A.M., Ali, A.M. and Badawy, N.A. (2020), "Efficiency of bentonite in removing cesium, strontium, cobalt and uranium ions from aqueous solution: encapsulation with alginate for column application", Int. J. Environ. Anal. Chem., 1-24. https://doi.org/10.1080/03067319.2020.1761348.   DOI
6 API Spec 13A (2010), Drilling fluid materials, Section 9-11: Bentonite, American Petroleum Institute; 18th edition, New York, USA.
7 Hayati-Ashtiani, M., Jazayeri, S.H., Ghannadi, M. and Nozad A. (2011), "Experimental characterizations and swelling studies of natural and activated bentonites with their commercial applications", J. Chem. Eng. Jpn., 44, 67-77. https://doi.org/10.1252/jcej.10we187   DOI
8 Gunatilake, S.K. (2015), "Methods of removing heavy metals from industrial wastewater", J. Multidiscip. Eng. Sci. Stud., 1(1), 12-18.
9 Hayati-Ashtiani, M. (2011), "Characterization of Nano-Porous Bentonite (Montmorillonite) Particles using FTIR and BET-BJH Analyses", Part. Part. Syst. Charact., 28(3-4), 71-76. https://doi.org/10.1002/ppsc.201100030.   DOI
10 Hayati-Ashtiani, M. (2012), "Use of FTIR spectroscopy in the characterization of natural and treated nanostructured bentonites (montmorillonites)", Particul. Sci. Technol., 30(6), 553-564. https://doi.org/10.1080/02726351.2011.615895.   DOI
11 Khan S.A. (2003), "Sorption of the long-lived radionuclides cesium-134, strontium-85 and cobalt-60 on bentonite", J. Radioanal. Nucl. Chem., 258(1), 3-6. https://doi.org/10.1023/A:1026217020215.   DOI
12 Kuleshova, M.L., Danchenko, N.N., Sergeev, V.I., Shimko, T.G. and Malashenko, Z.P. (2014), "The properties of bentonites as a material for sorptive barriers", Moscow U. Geol. B., 69(5), 356-364. https://doi.org/10.3103/S0145875214050044.   DOI
13 Marz, R.B. (1997), Medical, Nutrition From Marz, Omni Press, Madison, WI, USA.
14 Ostovaritalab, M.A. and Hayati-Ashtiani, M. (2019), "Investigation of Cs (I) and Sr (II) removal using nanoporous bentonite", Particul. Sci. Technol., 37(7), 877-889. https://doi.org/10.1080/02726351.2018.1455779.   DOI
15 Tang, Q., Katsumi, T., Inui, T. and Li, Z. (2015), "Membrane behavior of bentonite-amended compacted clay towards Zn(II) and Pb(II)", Membr. Water Treat., 6(5), 393-409. https://doi.org/10.12989/mwt.2015.6.5.393.   DOI
16 ASTM C 117-95 (1995), Standard test method for material finer than 75㎛ (No.200) sieve in mineral aggregates by washing, American Society for Testing and Materials, Pennsylvania, USA.
17 ASTM D 2974-00 (2000), Standard test method for moisture ash and organic matter of peat and other organic soil, American Society for Testing and Materials; Pennsylvania, USA.
18 Saleh, M., Yalvac, M. amd Arslan, H. (2019), "Optimization of remazol brilliant blue R adsorption onto Xanthium italicum using the response surface method", Karbala Int. J. Mod. Sci., 5(1), 8. https://doi.org/10.33640/2405-609X.1017.   DOI
19 Santamarina, J.C., Klein, K.A, Wang, Y.H. and Prencke, E. (2002), "Specific surface: Determination and relevance", Can. Geotech. J., 39(1), 233-241. http://doi.org/10.1139/t01-077.   DOI
20 Seliman, A.F., Lasheen, Y.F., Youssief M.A.E., Abo-Aly, M.M. and Shehata, F.A. (2014), "Removal of some radionuclides from contaminated solution using natural clay: Bentonite", J. Radioanal. Nucl. Chem., 300(3), 969-979. https://doi.org/10.1007/s10967-014-3027-z.   DOI
21 Wan, Y., Guo, D., Hui, X., Liu, L. and Yao, Y. (2020), "Studies on hydration swelling and bound water type of sodium- and polymer-modified calcium bentonite", Adv. Polym. Tech., 9361795. https://doi.org/10.1155/2020/9361795.   DOI
22 Yukselen, Y. and Kaya, A. (2006), "Comparison of methods for determining specific surface area of soils", J. Geotech. Geoenviron. Eng., 132(7), 931-936. https://doi.org/10.1061/(ASCE)1090-0241(2006)132:7(931).   DOI
23 Baylan, N. and Mericboyu, A.E. (2016), "Adsorption of lead and copper on bentonite and grapeseed activated carbon in singleand binary-ion systems", Separ. Sci. Technol., 51(14), 2360-2368. https://doi.org/10.1080/01496395.2016.1212888.   DOI
24 Ghazizahedi, Z. and Hayati-Ashtiani, M. (2018), "Removing Pb(II) by means of natural and acid-activated nanoporous clays", Proceedings of the 2nd International Conference on Engineering Sciences, 433, 012069, Kerbala, Iraq, March. https://doi.org/10.1088/1757-899X/433/1/012069.   DOI