Browse > Article
http://dx.doi.org/10.12989/mwt.2020.11.1.059

Performance of carbon nanotube-coated steel slag for high concentrations of phosphorus from pig manure  

Kang, Kyeong Hwan (Institute for Environment and Energy, Pusan National University)
Kim, Junghyeon (Department of Environmental Engineering, Pusan National University)
Jeon, Hyeonjin (Department of Environmental Engineering, Pusan National University)
Kim, Kyoungwoo (Department of Chemical and Environmental Engineering, Pusan National University)
Byun, Imgyu (Institute for Environment and Energy, Pusan National University)
Publication Information
Membrane and Water Treatment / v.11, no.1, 2020 , pp. 59-68 More about this Journal
Abstract
The study objective was to evaluate the enhanced removal of high concentrations of phosphorus from synthetic wastewater (solely phosphorus-containing) and real wastewater (pig manure) by using carbon nanotube (CNT)-coated steel slag. Generally, phosphorus removal by steel slag is attributed to Ca2+ eluted from the slag. However, in this study, CNT was used to control the excess release of Ca2+ from steel slag and increase the phosphorus removal. The phosphorus removal rate by the uncoated steel slag was lower than that of the CNT-coated steel slag, even though the Ca2+ concentrations were higher in the solution containing the uncoated steel slag. Therefore, the phosphorus removal could be attributed to both precipitation with Ca2+ eluted from steel slag in aqueous solution and adsorption onto the surface of the CNT-coated steel slag. Furthermore, the protons released from the CNT surface by exchanging with divalent cations acted to reduce the pH increase of the solution, which is attributed to the OH- eluted from the steel slag. The adsorption isotherm and kinetics of the CNT-coated steel slags followed the Freundlich isotherm and pseudo-second-order model, respectively. The maximum adsorption capacity of the uncoated and CNT-coated steel slags was 6.127 and 9.268 mg P g-1 slag, respectively. In addition, phosphorus from pig manure was more effectively removed by the CNT-coated steel slag than by the uncoated slag. Over 24 hours, the PO4-P removal in pig manure was 12.3% higher by the CNT-coated slag. This CNT-coated steel slag can be used to remove both phosphorus and metals and has potential applications in high phosphorus-containing wastewater like pig manure.
Keywords
pig manure; high concentration of phosphorus; phosphorus removal; steel slag; carbon nanotube; adsorption isotherm; adsorption kinetics;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Mahdevi, S. and Akhzari, D. (2016), "The removal of phosphate from aqueous solution using two nano-structure: copper oxide and carbon nanotubes", Clean Technol. Environ. Policy, 18, 817-827. https://doi.org/10.1007/s10098-015-1058-y.   DOI
2 Motz, H. and Geiseler, J. (2001), "Products of steel slag an opportunity to save natural resources", Waste Manage., 21, 285-293. https://doi.org/10.1016/S0956-053X(00)00102-1.   DOI
3 Na, C., Han, M. and Park, H. (2011), "Applicability of theoretical adsorption models for studies on adsorption properties of adsorbents (1)", J. Kor. Soc. Environ. Eng., 33, 606-616. https://doi.org/10.4491/KSEE.2011.33.8.606.   DOI
4 Ncibi, M.C. and Sillanpaa, M. (2015), "Optimized removal of antibiotic drugs from aqueous solutions using single, double and multi-walled carbon nanotubes", J. Hazard. Mat., 15, 102-110. https://doi.org/10.1016/j.jhazmat.2015.05.025.   DOI
5 Ng, C., Losso, J., Marshall, W. and Rao, R. (2002), "Freundlich adsorption isotherms of agricultural by-product-based powdered activated carbon in a geosmin-water system", Bioresour. Technol., 85, 131-135. https://doi.org/10.1016/S0960-8524(02)00093-7.   DOI
6 Niu, Y., Li, K., Ying, D., Wang, Y. and Jia, J. (2017), "Novel recyclable adsorbent for the removal of copper(II) and lead(II) from aqueous solution", Bioresour. Technol., 229, 63-68. https://doi.org/10.1016/j.biortech.2017.01.007.   DOI
7 Ozacar, M. (2003), "Equilibrium and kinetic modelling of adsorption of phosphorus on calcined alunite", Adsorpt,, 9, 125-132. https://doi.org/10.1023/A:1024289209583.   DOI
8 Dehghani, M.H., Mostofi, M., Alimohammadi, M., Mckay, G., Yetilmezsoy, K., Albadarin, A.B., Heibati, B., AlGhouti, M., Mubarak, N.M. and Sahu, J.N. (2016), "High-performance removal of toxic phenol by single-walled and multi-walled carbon nanotubes: Kinetics, adsorption, mechanism and optimization studies" J. Ind. Eng. Chem., 35, 63-74. https://doi.org/10.1016/j.jiec.2015.12.010.   DOI
9 Gong, G., Ye, S., Tian, Y., Wang, Q., Ni, J. and Chen, Y. (2009), "Preparations of a new sorbent with hydrated lime and blast furnace slag for phosphorus removal from aqueous solution", J. Hazard. Mat., 166, 714-719. https://doi.org/10.1016/j.jhazmat.2008.11.077.   DOI
10 Gupta, V. and Saleh, T. (2013), "Sorption of pollutants by porous carbon, carbon nanotube and fullerenes - An overview", Environ. Sci. Pollut. Res., 20, 2828-2843. https://doi.org/10.1007/s11356-013-1524-1.   DOI
11 Han, C., Wang, Z., Yang, H. and Xue, X. (2015), "Removal kinetics of phosphorus from synthetic wastewater using basic oxygen furnace slag", J. Environ. Sci., 30, 21-29. https://doi.org/10.1016/j.jes.2014.11.003.   DOI
12 Ho, Y.S. and Mckay, G. (1998), "A comparison of chemisorption kinetic models applied to pollutant removal on various sorbents", Proc. Safe. Environ. Protect., 76, 332-340. https://doi.org/10.1205/095758298529696.   DOI
13 Joko, I. (1984), "Phosphorus removal form wastewater by the crystallization method", Wat. Sci. Technol., 17, 121-132. https://doi.org/10.2166/wst.1985.0124.   DOI
14 Kang, K.H., Kim, H., Kim, J. and Byun, I. (2019), "Performance of carbon nanotube-coated steel slag filter media for the removal of phosphorus and heavy metal in stormwater", Desalin. Wat. Treat., 149, 58-68. https://doi.org/10.5004/dwt.2019.23988.   DOI
15 Kim, E. and Lim, S. (2008), "Simultaneous handling of phosphorus removal and filtration using granular converter slag as seed crystal and filter media", J. Kor. Soc. Wat. Sci. Technol., 16, 45-54.
16 Qiu, R., Cheng, F., Gao, R. and Li, J. (2013), "Ammonia nitrogen removal from micro-polluted river by permeable reactive barriers: lab-scale study with steel slag and fly ash brick in combination as reactive media", Desalin. Wat. Treat., 52, 365-374. https://doi.org/10.1080/19443994.2013.787372.   DOI
17 Park, A., Jadhav, R. and Fan, L. (2003), "$CO_2$ mineral sequestration: chemically enhanced aqueous carbonation of serpentine", Canadian J. Chem. Eng., 81, 885-890. https://doi.org/10.1002/cjce.5450810373.   DOI
18 Park, J., Kim, S., Delaune, R.D., Kang, B., Kang, S., Cho, J., Ok, Y. and Seo, D. (2016), "Enhancement of phosphorus removal with near-neutral pH utilizing steel and ferronickel slags for application of constructed wetlands", Ecol. Eng., 95, 612-621. https://doi.org/10.1016/j.ecoleng.2016.06.052.   DOI
19 Park, J., Wang, J.J., Kim, S., Cho, J., Kang, S., Delaune, R.D. and Seo, D. (2017), "Phosphate removal in constructed wetland with rapid cooled basic oxygen furnace slag", Chem. Eng. J., 327, 713-724. https://doi.org/10.1016/j.cej.2017.06.155.   DOI
20 Rao, G., Lu, C. and Su, F. (2007), "Sorption of divalent metal ions from aqueous solution by carbon nanotubes: A review", Sep. Purif. Technol., 58, 224-231. https://doi.org/10.1016/j.seppur.2006.12.006.   DOI
21 Rafiei, S. (2015), Foundation of Nanotechnology: volume 3. Mechanics of Carbon Nanotubes, Apple Academic Press Inc., Oakville, Ontario, Canada.
22 Ren, X., Chen, C., Nagatsu, M. and Wang, X. (2011), "Carbon nanotubes as adsorbents in environmental pollution management: A review", Chem. Eng. J., 170, 395-410. https://doi.org/10.1016/j.cej.2010.08.045.   DOI
23 Upadhyayula, V., Deng, S., Mitchell, M. and Smith, G. (2009), "Application of carbon nanotube technology for removal of contaminants in drinking water: A review", Sci. Tot. Environ., 408, 1-13. https://doi.org/10.1016/j.scitotenv.2009.09.027.   DOI
24 Riley, A. and Mayes, W. (2015), "Long-term evolution of highly alkaline steel slag drainage waters", Environ. Monit. Assess., 187, 463. https://doi.org/10.1007/s10661-015-4693-1.   DOI
25 Pan, B. and Xing, B. (2008), "Adsorption mechanisms of organic chemicals on carbon nanotubes", Environ. Sci. Technol., 42, 9005-9013. https://doi.org/10.1021/es801777n.   DOI
26 Su, Y., Cui, H., Gao, S. and Shang, J. (2013), "Strong adsorption of phosphate by amorphous zirconium oxide nanoparticles", Wat. Res., 47, 5018-5026. https://doi.org/10.1016/j.watres.2013.05.044.   DOI
27 Tofaghy, M.A. and Mohammadi, T. (2011), "Permanent hard water softening using carbon nanotube sheets", Desalin., 268, 208-213. https://doi.org/10.1016/j.desal.2010.10.028.   DOI
28 Tran, D., Kabiri, S., Wang, L. and Losic, D. (2015), "Engineered grapheme-nanoparticle aerogel composites for efficienct removal of phosphate from water", J. Mat. Chem. A, 3, 6844-6852. https://doi.org/10.1039/C4TA06308B.   DOI
29 Vohla, C., Koiv, M., Bavor, H., Chazarenc, F. and Mander, U. (2011), "Filter materials for phosphorus removal from wastewater in treatment wetland - a review", Ecol. Eng., 37, 70-89. https://doi.org/10.1016/j.ecoleng.2009.08.003.   DOI
30 Xie, X., Ye, M., Hu, L., Liu, N., McDonough, J., Chen, W., Alshareef, H., Criddle, C. and Cui, Y. (2012), "Carbon nanotube-coated macroporous sponge for microbial fuel cell electrodes", Ene. Environ. Sci., 5, 5265-5270. https://doi.org/10.1039/C1EE02122B.   DOI
31 Korean Ministry of Trade, Industry and Energy (MOTIE) (2017), "Act on the promotion of the development, use and diffusion of new and renewable energy", Korea Legislation Research Institute.
32 Xiong, J.B. and Mahmood, Q. (2010), "Adsorptive removal of phosphate from aqueous media by peat", Desalin., 259, 59-64. https://doi.org/10.1016/j.desal.2010.04.035.   DOI
33 Xue, Y., Hou, H. and Zhu, S. (2009), "Characteristics and mechanisms of phosphate adsorption onto basic oxygen furnace slag", J. Hazard. Mat., 162, 973-980. https://doi.org/10.1016/j.jhazmat.2008.05.131.   DOI
34 Xue, Y., Hou, H. and Zhu, S. (2009), "Competitive adsorption of copper(II), cadmium(II), lead(II) and zinc(II) onto basic oxygen furnace slag", J. Hazard. Mat., 162, 391-401. https://doi.org/10.1016/j.jhazmat.2008.05.072.   DOI
35 Kim. J., Seo, J., Kang, M., Kim, I. and Oh, K. (2010), "A study on phosphate removal characteristics of EAF-slag for submarine cover material", Clean Technol, 16(4), 258-264.
36 Korean Ministry of Environment (KMOE) (2018), "Act on the management and use of livestock excreta", Korea Legislation Research Institute.
37 Yin, H., Yun, Y., Zhang, Y. and Fan, C. (2011), "Phosphate removal from wastewaters by a naturally occurring, calcium-rich sepiolite", J. Hazard. Mat., 198, 362-369. https://doi.org/10.1016/j.jhazmat.2011.10.072.   DOI
38 Yang, J., Wang, S., Lu, Z., Yang, J. and Lou, S. (2009), "Converter slag-coal cinder columns for the removal phosphorous and other pollutants", J. Hazard. Mat., 168, 331-337. https://doi.org/10.1016/j.jhazmat.2009.02.024.   DOI
39 Yang, J., Yao, Z., Tang, C., Darvell, B.W., Zhang, H., Pan, L., Liu, J. and Chen, Z. (2009), "Growth of apatite on chitosan-multiwall carbon nanotube composite membranes", Appl. Surf. Sci., 255, 8551-8555. https://doi.org/10.1016/j.apsusc.2009.06.013.   DOI
40 Yim, S. (2010), "Removal Characteristics of Nitrogen and Phosphorus by Struvite Crystallization using Converter Slag as a Seed Crystal", J. Kor. Soc. Environ. Eng., 32, 879-886.
41 Liew, K.M., Wong, C.H., He, X.Q. and Tan, M.J. (2005), "Thermal stability of the single and multi-walled carbon nanotubes", Physic. Rev. B, 71, https://doi.org/10.1103/PhysRevB.71.075424.
42 Lee, S., Kim, C. and Paik, D. (2015), "Evaluation of phosphorus adsorption characteristic with surface modified activated carbon", J. Kor. Soc. Urban Environ., 15, 189-197.
43 Liu, J., Zhou, Q., Chen, J., Zhang, L. and Chang, N. (2013), "Phosphate adsorption on hydroxyl-iron-lanthanum doped activated carbon fiber", Chem. Eng. J., 215-216, 859-867. https://doi.org/10.1016/j.cej.2012.11.067.   DOI
44 Lian, L., Guo, L. and Guo, C. (2009), "Adsorption of Congo red from aqueous solution onto Ca-bentonite", J. Hazard. Mat., 161, 126-131. https://doi.org/10.1016/j.jhazmat.2008.03.063.   DOI
45 Lu, C. and Chiu, H. (2006), "Adsorption of zinc (II) from water with purified carbon nanotubes", Chem. Eng. Sci., 61, 1138-1145. https://doi.org/10.1016/j.ces.2005.08.007.   DOI
46 Kim, J., Lim, C., Kim, K., Kim, D., Lee, S. and Kim, J. (2008), "Application of adsorption characteristic of ferrous iron waste to phosphate removal from municipal wastewater", Kor. J. Environ. Agri., 27, 231-238. https://doi.org/10.5338/KJEA.2008.27.3.231.   DOI
47 Lu, S., Bai, S. and Shan, H. (2008), "Mechanisms of phosphate removal from aqueous solution by blast furnace slag and steel furnace slag", J. Zhejiang Univ. Sci. A, 9, 125-132. https://doi.org/10.1631/jzus.A071272.   DOI
48 Yu, J., Liang, W., Wang, L., Li, F., Zou, Y. and Wang, H. (2015), "Phosphate removal from domestic wastewater using thermally modified steel slag", J. Environ. Sci., 31, 81-88. https://doi.org/10.1016/j.jes.2014.12.007.   DOI
49 Zhou, Q., Wang, X., Liu, J. and Zhang, L. (2012), "Phosphorus removal from wastewater using nano-particles of hydrated ferric oxide doped activated carbon fiber prepared by Sol-Gel method", Chem. Eng. J., 200-202, 619-626. https://doi.org/10.1016/j.cej.2012.06.123.   DOI
50 Zong, E., Wei, D., Wan, H., Zheng, S., Xu, Z. and Zhu, D. (2013), "Adsorptive removal of phosphate ions from aqueous solution using zirconia-functionalized graphite oxide", Chem. Eng. J., 221, 193-203. https://doi.org/10.1016/j.cej.2013.01.088.   DOI
51 Mahadevi, A. and Sastry, G. (2012), "Cation-${\pi}$ interaction: Its role and relevance in chemistry, biology, and material science", Chem. Rev., 113, 2100-2138. https://doi.org/10.1021/cr300222d.   DOI
52 Blanco, I., Molle, P., de Miera, L. and Ansola, G. (2016), "Basic oxygen furnace steel slag aggregates for phosphorus treatment. Evaluation of its potential use as a substrate in constructed wetland", Wat. Res., 89, 355-365. https://doi.org/10.1016/j.watres.2015.11.064.   DOI
53 APPA-AWWA-WEF (2005), "Standard Method for the Examination of Water and Wastewater", 21st edition. American Public Health Association, Washington, D.C., U.S.A.
54 Atieh, M.A., Bakather, O.Y., Al-Tawbini, B., Bukhari, A.A., Abuilaiwi, F.A. and Fettouhi, M. (2010), "Effect of carboxylic functional group functionalized on carbon nanotubes surface on the removal of lead from water", Bioinorg. Chem. Appl., https://doi.org/10.1155/2010/603978.
55 Barca, C., Gerente, C., Meyer, D., Chazarenc, F. and Andres, Y. (2012), "Phosphate removal from synthetic and real wastewater using steel slags produced in Europe", Wat. Res., 46, 2376-2384. https://doi.org/10.1016/j.watres.2012.02.012.   DOI
56 Bowden, L., Jarvis, A., Younger, P. and Johnson, K. (2009), "Phosphorus removal from waste waters using basic oxygen steel slag", Environ. Sci. Technol., 43, 2476-2481. https://doi.org/10.1021/es801626d.   DOI
57 Cha, W., Kim, J. and Choi, H. (2006), "Evaluation of steel slag for organic acid and inorganic removals in soil aquifer treatment", Wat. Res., 40, 1034-1042. https://doi.org/10.1016/j.watres.2005.12.039.   DOI
58 Chazarenc, F., Filiatrault, M., Brisson, J. and Comeau, Y. (2010), "Combination of slag, limestone and sedimentary apatite in columns for phosphorus removal from sludge fish farm effluents", Wat., 2, 500-509. https://doi.org/10.3390/w2030500.   DOI