1 |
Sargent, P. (2015), 21-the development of alkali-activated mixtures for soil stabilisation. Handbook of Alkali-Activated Cements, Mortars and Concretes. 555-604. https://doi.org/10.1533/9781782422884.4.555.
DOI
|
2 |
Bozbey, I., Kelesoglu, M.K., Oztoprak, S., Komut, M., Comez, S., Ozturk, T., Mert, A. and Ocal, K. (2021), "Effects of soaking on a lime stabilized clay and implications for pavement design", Geomech. Eng., 24(2), 115-127. http://doi.org/10.12989/gae.2021.24.2.115.
DOI
|
3 |
Chaiyaput, S. and Ayawan Ayawanna, (2021a), "Lateritic soil stabilization by addition of steel slags", Geotech. Eng. J.
|
4 |
Chaiyaput , S. and AyawanAyawanna, J. (2021b), "Stabilization of lateritic soil by ladle furnace slag for pavement subbase material", Geomech. Eng., 26(4), 232-331. https://doi.org /10.12989/gae.2021.26.4.323.
DOI
|
5 |
Kontoleontos, F., Tsakiridis, P., Marinosa, A., Katsiotis, N., Kaloidas, V. and Katsioti, M. (2013), "Dry-grinded ultrafine cements hydration. Physicochemical and microstructural characterization", Mater. Res., 16(2), 404-416. https://doi.org/10.1590/S1516-14392013005000014.
DOI
|
6 |
Lv, S., Liu, C., Lan, J., Zhang, H., Zheng, J. and You, Z. (2018), "Fatigue equation of cement-treated aggregate base materials under a true stress ratio", Appl. Sci., 8(5), 691. https://doi.org/10.3390/app8050691.
DOI
|
7 |
Maghool, F., Arulrajah, A., Horpibulsuk, S. and Du. Y.J. (2017), "Geotechnical and geoenvironmental properties of ladle furnace slag and electric arc furnace slag in unbound pavement base/subbase applications", Proceedings of the 19th Int. Conf. Mech. Geotech. Eng., Seoul.
|
8 |
Standards Australia. (2002), Australian earth building handbook. HB 195, Sydney Standard, Section 4 construction, volume 04.01 cement, Lime, Gypsum.
|
9 |
Vanesa O.L., Juan M.M., Isidoro I.C. and Javier J.G. (2014), "ladle-furnace basic slags and their soil-stabilization applications", Constr. Build. Mater., 68, 455-464 https://doi.org/10.1016/j.conbuildmat.2014.07.023.
DOI
|
10 |
Yishun, L., Guoxi, J., Kejin, W., Siraj, A.Q. and Wenjie. Y. (2020), "Effect of steel slag on the hydration and strength development of calcium sulfoaluminate cement", Constr. Build. Mater., 265, 120301. https://doi.org/10.1016/j.conbuildmat.2020.120301.
DOI
|
11 |
ASTM C-109/C 109M-05 (2005), Standard test method for compressive strength of hydraulic cement mortars (using 2-in. or [50-mm] cube specimens). Annual Book of ASTM Standard, Philadelphia, PA, USA.
|
12 |
Torres, C., Rostom, S. and de Lasa, H. (2020), "An eco-friendly fluidizable FexOy/CaO-γ-Al2O3 catalyst for tar cracking during biomass gasification", Catalysts., 10(7), 806. https://doi.org/10.3390/catal10070806.
DOI
|
13 |
Songsuda, V. and Runglawan, R. (2013), "Chemical stabilization of soft Bangkok clay using the blend of calcium carbide residue and biomass ash", Soils Found., 53(2), 272-281. https://doi.org/10.1016/j.sandf.2013.02.007.
DOI
|
14 |
Termkhajornkit, P., Vu, Q. H., Barbarulo, R., Daronnat, S. and Chanvillard, G. (2014), "Dependence of compressive strength on phase assemblage in cement pastes: beyond gel-space ratio- experimental evidence and micromechanical modelling", Cement Concr. Res., 56, 1-11. https://doi.org/10.1016/j.cemconres.2013.10.007.
DOI
|
15 |
Wu, J., Jinping, J., Sha, D. and Ping, D. (2020), "Hydration and microstructure of steel slag as cementitious material and fine aggregate in mortar", Molecules., 25, 4456. https://doi.org/10.3390/molecules25194456.
DOI
|
16 |
Yi, J., Tung-Chai, L., Caijun, S. and Shu-Yuan, P. (2018), "Characteristics of steel slags and their use in cement and concrete-A review", Resour. Conserv. Recycl., 136, 187-197. https://doi.org/10.1016/j.resconrec.2018.04.023.
DOI
|
17 |
Yongjia, H., Linnu, L., Leslie, J.S., Jennifer, L.R., Paramita, M., and Shuguang, H. (2013), "Effect of calcium-silicon ratio on microstructure and nanostructure of calcium silicate hydrate synthesized by reaction of fumed silica and calcium oxide at room temperature", Mater. Struct., 47, 311-322. https://doi.org/10.1617/s11527-013-0062-0.
DOI
|
18 |
Lin, F. and Meyer, C. (2009), "Hydration kinetics modeling of Portland cement considering the effects of curing temperature and applied pressure", Cem. Concr. Res., 39(4), 255-265. https://doi.org/10.1016/j.cemconres.2009.01.014.
DOI
|
19 |
Ma, C., Chen, L. and Chen, B. (2014), "Analysis of strength development in soft clay stabilized with cement-based stabilizer", Constr. Build. Mater., 71, 354-362. https://doi.org/10.1016/j.conbuildmat.2014.08.087.
DOI
|
20 |
Aly, A. and Usama, H.I. (2014), "Stability of soft clay soil stabilised with recycled gypsum in a wet environment", Soils Found., 54(3), 405-416. http://doi.org/10.1016/j.sandf.2014.04.009.
DOI
|
21 |
Moayyeri, N., Oulapour, M. and Haghighi, A. (2019), "Study of geotechnical properties of a gypsiferous soil treated with lime and silica fume", Geomech. Eng., 17(2), 195-206. http://doi.org/10.12989/gae.2019.17.2.195.
DOI
|
22 |
Maghool, F., Arulrajah, A., Du, Y.J., Horpibulsuk, S. and Chinkulkijniwat, A. (2016), "Environmental impact of utilizing waste steel slag aggregates as recycled road construction materials", Clean. Technol. Environ., 19, 949-958. https://doi.org/10.1007/s10098-016-1289-6.
DOI
|
23 |
Mahoutian, M. and Shao, Y. (2016), "Low temperature synthesis of cement from ladle slag and fly ash", J. Sustain. Cem.-Based Mater., 5(4), 247-258. https://doi.org/10.1080/21650373.2015.1047913.
DOI
|
24 |
Minke, G. (2006), Building with Earth: Design and Technology of a Sustainable Architecture, Birkhauser, Boston, MA.
|
25 |
Salaheddin, H. and Seyed, M.M. (2018), "Effect of clay mineral types on the strength and microstructure properties of soft clay soils stabilized by epoxy resin", Geomech. Eng., 15(2), 729-738. http://doi.org/10.12989/gae.2018.15.2.729.
DOI
|
26 |
Shalabi, F.I., Asi, I.M. and Qasrawi, H.Y. (2017), "Effect of by-product steel slag on the engineering properties of clay soils", J. King. Saud. Univ. Eng. Sci., 29, 394-399. https://doi.org/10.1016/j.jksues.2016.07.004.
DOI
|
27 |
Baghini, M.S., Ismail, A. and Firoozi, A.A. (2016), "Physical and mechanical properties of carboxylated styrene-butadiene emulsion modified Portland cement used in road base construction", J. Appl. Sci., 16, 344-358. https://doi.org/10.3923/jas.2016.344.358.
DOI
|
28 |
Crowley, M. (1997), "Quality control for earth structures", Aust. Inst. Build. Pap., 8, 109-118.
|
29 |
Li, C., Chen, Z., Wu, S., Li, B., Xie, J. and Xiao, Y. (2017), "Effects of steel slag fillers on the rheological properties of asphalt mastic", Constr. Build. Mater., 145(1), 383-391. https://doi.org/10.1016/j.conbuildmat.2017.04.034.
DOI
|
30 |
Jun, H., Lei, Z., Hong, W. and Juan, D. (2018) "Experimental study of the compressive strength of chemically reinforced organic-sandy soil", Geomech. Eng., 16(3), 247-255. http://dx.doi.org/10.12989/gae.2018.16.3.247
DOI
|
31 |
ASTM D4318 (2005), Standard test methods for liquid limit, pastic limit, and plasticity index of soils. Annual Book of ASTM Standard, Philadelphia, PA, USA.
|
32 |
Obianigwe, N. and Ngene, B.U. (2018), "Soil stabilization for road construction: comparative analysis of a three-prong approach", IOP Conf. Ser.: Mater. Sci. Eng., 413, 012023. https://doi.org/10.1088/1757-899X/413/1/012023.
DOI
|
33 |
Bo, X., Yeap, K. and Yi, Y. (2019), "Stabilization/solidification of ladle slag in cement-stabilized clay: towards a sustainable geoenvironment", Proceedings of the 8th Int. Cong. Environ. Geotech. https://doi.org /10.1007/978-981-13-2221-1_42.
DOI
|
34 |
Manso, J.M., Ortega-Lopez, V., Polanco, J.A. and Setien, J. (2013). "The use of ladle furnace slag in soil stabilization", Constr. Build. Mater., 40, 126-134. https://doi.org/10.1016/j.conbuildmat.2012.09.079.
DOI
|
35 |
Niazi, Y. and Jalili, M. (2009), "Effect of Portland cement and lime additives on properties of cold in-place recycled mixtures with asphalt emulsion", Constr. Build. Mater., 23(3), 1338-1343. https://doi.org/10.1016/j.conbuildmat.2008.07.020.
DOI
|
36 |
Onal, O. and Sariavci, C. (2019), "Stabilization of meles delta soils using cement and lime mixtures", Geomech. Eng., 19(6), 543-554. http://doi.org/10.12989/gae.2019.19.6.543.
DOI
|