Browse > Article
http://dx.doi.org/10.12989/gae.2021.27.2.123

The bearing capacity of circular footings on sand with thin layer: An experimental study  

Askari, Morteza (Department of Civil Engineering, Science and Research Branch, Islamic Azad University)
Khalkhali, Ahad Bagherzadeh (Department of Civil Engineering, Science and Research Branch, Islamic Azad University)
Makarchian, Masoud (Department of Civil Engineering, Bu-Ali Sina University)
Ganjian, Navid (Department of Civil Engineering, Science and Research Branch, Islamic Azad University)
Publication Information
Geomechanics and Engineering / v.27, no.2, 2021 , pp. 123-130 More about this Journal
Abstract
Thin layers have substantial effects on the ultimate bearing capacity, despite their seeming insignificant. In this research, the effects of a thin layer on the ultimate bearing capacity of a circular footing on the sand bed are investigated by small-scale physical models. The investigations were carried out by varying the material type, thickness, and depth of the thin layer. The results indicate that the weak thin layer decreases both the ultimate bearing capacity and stiffness of the soil-footing system and the strong thin layer increases both the ultimate bearing capacity and the soil-footing system stiffness. The amount of this effect depends on the thickness, depth of deposition, and the material type of the thin layer. According to the results, the weak layer for the critical depth of 1B led to the most reduction in ultimate bearing capacity by 26% (from 183 kPa to 135 kPa), while no effects were observed at the depth of 2B. The strong layer is also for the state where this layer is just below the footing, had the highest increase in ultimate bearing capacity by 329% (from 183 kPa to 603 kPa), but at a depth of about 1.25B, it was ineffective.
Keywords
physical model; stiffness; strong thin layer; ultimate bearing capacity; weak thin layer;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Martin, C.M. (2005), "Exact bearing capacity calculations using the method of characteristics", Proceedings of the 11th International Conference of the International Association for Computer Methods and Advances in Geomechanics, 4, 441-450. Turin, Italy, June.
2 Poulos, H.G. (2005), "Pile behavior-consequences of geological and construction imperfections", J. Geotech. Geoenviron. Eng., 131(5), 538-563. https://doi.org/10.1061/(ASCE)1090-0241(2005)131:5(538).   DOI
3 Taylor, R.N. (1995), "Centrifuges in modelling: principles and scale effects", Geotechnical Centrifuge Technology, Blackie Academic and Professional, London, Untied Kingdom, 19-33.
4 Toyosawa, Y., Itoh K., Kikkawa, N, Yang, J.J. and Liu, F. (2013), "Influence of model footing diameter embedded depth on particle size effect in centrifugal bearing capacity test", Soils Foundations, 53(2), 349-356. https://doi.org/10.1016/j.sandf.2012.11.027.   DOI
5 Masayuki, H. Yang, W. Shintaro, K. Yukio, N. and Norimasa, Y. (2017), "Effect of fines on the compression behaviour of poorly graded silica sand", Geomech. Eng., 12(1), 127-138. http://dx.doi.org/10.12989/gae.2017.12.1.127.   DOI
6 Meyerhof, G.G. (1963), "Some Recent Research on The bearing capacity of foundations", Can. Geotech. J., 1(1), 16-26. https://doi.org/10.1139/t63-003.   DOI
7 Oda, M. and Win, S. (1990), "Ultimate bearing capacity tests on sand with clay layer", J. Geotech. Eng., 116(12), 1902-1906. http://dx.doi.org/10.1061/(ASCE)0733-9410(1990)116:12(1902).   DOI
8 Valore, C. Ziccarelli, M. and Muscolino, S.R. (2017), "The bearing capacity of footings on sand with a weak layer", Geotech. Res., 4(1), 12-29. https://doi.org/10.1680/jgere.16.00020.   DOI
9 Ziccarelli, M. Valore, C. Muscolino, S.R and Fioravante, V. (2017), "Centrifuge tests on the strip footings on sand with a weak layer", Geotech. Res., 4(1), 47-64. http://dx.doi.org/10.1016/j.sandf.2012.11.027.   DOI
10 Erdal, U. (2015), "The bearing capacity of square footings on a sand layer overlying clay", Geomech. Eng., 9(3), 287-311. https://doi.org/10.12989/gae.2015.9.3.287   DOI
11 ASTM D 2487 (2006), Standard practice for classification of soils for engineering purpose (Unified soil classification system), American Society of Testing and Materials; West Conshohocken, PA, USA.
12 Das, B.M. (2016), Principles of Foundation Engineering, (8th Edition), PWS Publishing Company, Pacific Grove, USA.
13 ASTM D 4254 (2004b), Standard test methods for minimum index density and unit weight of soils and calculation of relative density, American Society of Testing and Materials; West Conshohocken, PA, USA.
14 Arushi, G., Dutta, R. K., Shrivastava, R. and Khatri, V. N. (2017), "Ultimate bearing capacity of square/rectangular footing on layered soil", Indian Geotech. J., 47(3), 303-313. https://doi.org/10.1007/s40098-017-0233-y.   DOI
15 ASTM C 136/C136M (2010), Standard test method for sieve analysis of fine and coarse aggregates, American Society of Testing and Materials; West Conshohocken, PA, USA.
16 ASTM D 854-05 (2005), Standard test method for specific gravity of soils solids by water pycnometer, American Society of Testing and Materials; West Conshohocken, PA, USA.
17 ASTM D 2664 (2010), Standard test method for triaxial compressive strength of untrained rock core specimens without pore pressure measurements, American Society of Testing and Materials; West Conshohocken, PA, USA.
18 ASTM D 4253-00 (2004a), Standard test methods for maximum index density and unit weight of soils using a vibratory table, American Society of Testing and Materials; West Conshohocken, PA, USA.
19 Bolton M.D. and Lau C.K. (1989), "Scale effects in the bearing capacity of granular soils", Proceedings of the 12th International Conference on Soil Mechanics and Foundation Engineering, 2, 895-898, Rio de Janeiro, Brazil, August.
20 Kamal, M.H.I. (2014), "Bearing capacity of circular footing resting on granular soil overlying soft clay", HBRC J., 1(1), 71-77. http://dx.doi.org/10.1016/j.hbrcj.2014.07.004.   DOI
21 ASTM D4318 (2010), Standard test method for liquid limit, plastic limit, and plasticity index of soils, American Society of Testing and Materials; West Conshohocken, PA, USA.
22 ASTM D 2216-05 (2005), Standard test method for laboratory determination of water (moisture) content of soil and rock by mass, American Society of Testing and Materials; West Conshohocken, PA, USA.
23 ASTM D 3080-04 (2010), Standard test method for direct shear test of soils under consolidated drained conditions, American Society of Testing and Materials; West Conshohocken, PA, USA.
24 ASTM D 6683 (2010), Standard test method for measuring bulk density values of powders and other bulk solids as function of compressive stress, American Society of Testing and Materials; West Conshohocken, PA, USA.
25 Priti, M. and Manohar, V. (2013), "Strip footings on a three layer soil system: theory of elasticity approach", Int. J. Geotech. Eng., 1(1), 47-59. http://dx.doi.org/10.3328/IJGE.2007.01.01.47-59.   DOI
26 Bodo, B. and Jones, C. (2013), Introduction to Soil Mechanics, (1th Edition), John Wiley and Sons, Ltd, NJ, USA.
27 Maryam, H. (2016), "Bearing capacity of strip footings resting on granular soil overlying soft clay", Int. J. Civil Eng., 14(7), 467-477. http://dx.doi.org/10.1007/s40999-016-0067-5   DOI
28 Murthy VNS. (2002), Geotechnical Engineering, (1th Edition) Taylor and Francis Inc., Oxfordshire, United Kingdom.
29 Terzaghi, K. (1936), Presidential Address, Proceedings, 1st International Conference on Soil Mechanics Foundation Engineering, 3, 13-18, Harvard University, Cambridge, MA, USA.
30 Arghadeep, B. and Murali, K. (2017), "Behaviour of circular footing resting on layered foundation: sand overlying clay of varying strengths", Int. J. Geotech. Eng., 13(1), 9-24. https://doi.org/10.1080/19386362.2017.1314242.   DOI
31 Vesic, A.S. (1973), "Analysis of ultimate loads of shallow foundations", J. Soil Mech. Foundations Division, J. American Soc. Civil Eng., 99(SM1), 45-73. https://doi.org/10.1061/JSFEAQ.0001846.   DOI
32 Terzaghi, K. (1929) "Effects of minor geologic details on the safety of dams", Geology and Engineering for Dams and Reservoirs, American Institute of Mining and Metallurgical Engineers, Technical Publication 215, 31-44, Reprinted in Terzaghi, K. (1960) From Theory to Practice in Soil Mechanics: Selection from the writings of Karl Terzaghi. Wiley, Hoboken, N.J, USA, 119-132.