Browse > Article
http://dx.doi.org/10.12989/gae.2020.23.2.093

Research on the support of larger broken gateway based on the combined arch theory  

Yang, Hongyun (State Key Laboratory of Mountain Bridge and Tunnel Engineering, Chongqing Jiaotong University)
Liu, Yanbao (China Coal Technology Engineering Group Chongqing Research Institute)
Li, Yong (State Key Laboratory of Coal Mine Disaster Dynamics and Control, Chongqing University)
Pan, Ruikai (State Key Laboratory of Coal Mine Disaster Dynamics and Control, Chongqing University)
Wang, Hui (State Key Laboratory of Coal Mine Disaster Dynamics and Control, Chongqing University)
Luo, Feng (School of Mining and Geomatics, Hebei University of Engineering)
Wang, Haiyang (State Key Laboratory of Mountain Bridge and Tunnel Engineering, Chongqing Jiaotong University)
Cao, Shugang (State Key Laboratory of Coal Mine Disaster Dynamics and Control, Chongqing University)
Publication Information
Geomechanics and Engineering / v.23, no.2, 2020 , pp. 93-102 More about this Journal
Abstract
The excavation broken zones (EBZ) of gateways is a significant factor in determining the stability of man-made opening. The EBZ of 55 gateways with variety geological conditions were measured using Ground Penetrating Radar (GPR). The results found that the greatly depth of EBZ, the smallest is 1.5 m and the deepest is 3.5 m. Experimental investigations were carried out in the laboratory and in the coal mine fields for applying the combined arch support theory to large EBZ. The studies found that resin bolts with high tensile strength and good bond force could provide high pretension force with bolt extensible anchorage method in the field. Furthermore, the recently invented torque amplifier could greatly improve the bolt pretension force in poor lithology. The FLAC3D numerical simulation found that the main diffusion sphere of pretension force was only in the free segment zone of the surrounding rock. Further analysis found that the initial load-bearing zone thickness of the combined arch structure in large EBZ could be expressed by the free segment length of bolt. The using of high mechanical property bolts and steel with high pretension force will clearly putting forward the bolt length selection rule based on the combined arch support theory.
Keywords
large EBZ; combined arch; high pretension force; extensible anchorage; initial load-bearing zone;
Citations & Related Records
Times Cited By KSCI : 18  (Citation Analysis)
연도 인용수 순위
1 Dong, F., Song, H., Guo, Z., Lu, S. and Liang, S. (1994), "Roadway support theory based on broken rock zone", J. China Coal. Soc., 19, 21-32.
2 Carranza-Torres, C. (2009), "Analytical and numerical study of the mechanics of rockbolt reinforcement around tunnels in rock masses", Rock Mech. Rock. Eng., 42(2), 175-228. http://doi.org/10.1007/s00603-009-0178-2.   DOI
3 Zhao, T., Zhang, Y, B., Zhang, Q. and Tan, Y. (2018), "Analysis on the creep response of bolted rock using bolted burgers model", Geomech. Eng., 14(2), 141-149. https://doi.org/10.12989/gae.2018.14.2.141.   DOI
4 Zhao, Y., Cao, S., Shang, D., Yang, H., Yu, Y. and Li, Y. (2019), "Crack propagation and crack direction changes during the hydraulic fracturing of coalbed", Comput. Geotech., 111, 229-242. https://doi.org/10.1016/j.compgeo.2019.03.018.   DOI
5 Zhao, Y., Cao, S., Yong, L., Zhang, Z. and Pan, R. (2018), "The occurrence state of moisture in coal and its influence model on pore seepage", Rsc. Adv., 8(10), 5420-5432. https://doi.org/10.1039/c7ra09346b.   DOI
6 Zheng, X.G., Zhang, N. and Xue, F. (2012), "Study on stress distribution law in anchoring section of prestressed bolt", J. Min. Saf. Eng., 29(3), 365-370.
7 Gu, J., Shen, J., Chen, A. and Ming, Z. (2000), "Model testing study of strain distribution regularity in rock mass caused by prestressed anchorage cable", Chin. J. Rock Mech. Eng., S1, 917-921.
8 Zhou, H., Xu, R.C., Zhang, C.Q., Lu, J.J., Meng, F.Z. and Shen, Z. (2015), "Research on effect of interior bonding section length of prestressed anchor rod", Rock Soil Mech., 36(9), 2688-2694. https://doi.org/10.16285/j.rsm.2015.09.032.
9 Zou, D., Li, M., Gong, L., Hu, Y. and Yang, H. (2015), "Study on the rib spalling and the treatment during driving in strong outburst and medium thick coal seam", Coal Min. Mod., 4, 81-83. http://doi.org/10.13606/j.cnki.37-1205/td.2015.04.035.
10 Ding, X., Sheng, Q., Han, J., Cheng, L. and Bai, S. (2002), "Numerical simulation testing study on reinforcement mechanism of prestressed anchorage cable", Chin. J. Rock Mech. Eng., 21(7), 980-988.   DOI
11 Gu, R. and Ozbay, U. (2015), "Numerical investigation of unstable rock failure in underground mining condition", Comput. Geotech., 63, 171-182. https://doi.org/10.1016/j.compgeo.2014.08.013.   DOI
12 Guo, X., Mao, X., Ma, C. and Huang, J. (2013), "Bolt support mechanism based on elastic theory", Int. J. Min. Sci. Technol., 23(4), 469-474. https://doi.org/10.1016/j.ijmst.2013.07.002.   DOI
13 Haghnejad, A., Ahangari, K., Moarefvand, P. and Goshtasbi, K. (2018), "Numerical investigation of the impact of geological discontinuities on the propagation of ground vibrations", Geomech. Eng., 14(6), 545-552. https://doi.org/10.12989/gae.2018.14.6.545.   DOI
14 Jiang, L.S., Sainoki, A., Mitri, H.S., Ma, N.J., Liu, H.T. and Hao, Z. (2016), "Influence of fracture-induced weakening on coal mine gateroad stability", Int. J. Rock Mech. Min. Sci., 88, 307-317. http://doi.org/10.1016/j.ijrmms.2016.04.017.   DOI
15 Kang, H. (2016), "Sixty years development and prospects of rock bolting technology for underground coal mine roadways in China", J. China U. Min. Technol., 45(6), 1071-1081.
16 Kang, H.P., Jiang, P.F. and Cai, J.F. (2014), "Test and analysis on stress fields caused by rock bolting", J. China Coal Soc., 39(8), 1521-1529. http://doi.org/10.13225/j.cnki.jccs.2014.9019.
17 Lee, J. and Hong, J.W. (2018), "Crack initiation and fragmentation processes in pre-cracked rock-like materials", Geomech. Eng., 15(5), 1047-1059. https://doi.org/10.12989/gae.2018.15.5.1047.   DOI
18 Ma, S., Nemcik, J. and Aziz, N. (2013), "An analytical model of fully grouted rock bolts subjected to tensile load", Constr. Build. Mater., 49, 519-526. http://doi.org/10.1016/j.conbuildmat.2013.08.084.   DOI
19 Li, C.C., Stjern, G. and Myrvang, A. (2014), "A review on the performance of conventional and energy-absorbing rockbolts", J. Rock Mech. Geotech. Eng., 6(4), 315-327. http://doi.org/10.1016/j.jrmge.2013.12.008.   DOI
20 Lin, J., Shi, Y., Sun, Z., Wang, Z. and Cai, J. (2016), "Large scale model test on the distribution characteristics of the prestressed field of end-anchored bolts", Chin. J. Rock Mech. Eng., 35(11), 2237-2247. http://doi.org/10.13722/j.cnki.jrme.2016.0626.
21 McCann, D.M. and Forde, M.C. (2001), "Review of NDT methods in the assessment of concrete and masonry structures", NDT E Int., 34(2), 71-84. http://doi.org/10.1016/S0963-8695(00)00032-3.   DOI
22 Nemcik, J., Ma, S., Aziz, N., Ren, T. and Geng, X. (2014), "Numerical modelling of failure propagation in fully grouted rock bolts subjected to tensile load", Int. J. Rock Mech. Min. Sci., 71, 293-300. http://doi.org/10.1016/j.ijrmms.2014.07.007.   DOI
23 Oh, J., Moon, T., Canbulat, I. and Moon, J. (2019), "Design of initial support required for excavation of underground cavern and shaft from numerical analysis", Geomech. Eng., 17(6), 573-581. https://doi.org/10.12989/gae.2019.17.6.573.   DOI
24 Orban, Z. and Gutermann, M. (2009), "Assessment of masonry arch railway bridges using non-destructive in-situ testing methods", Eng. Struct., 31(10), 2287-2298. http://doi.org/10.1016/j.engstruct.2009.04.008.   DOI
25 Perez-Gracia, V., Garcia Garcia, F. and Rodriguez Abad, I. (2008), "GPR evaluation of the damage found in the reinforced concrete base of a block of flats: A case study", NDT E Int., 41(5), 341-353. http://doi.org/10.1016/j.ndteint.2008.01.001.   DOI
26 Sato, T., Kikuchi, T. and Sugihara, K. (2000), "In-situ experiments on an excavation disturbed zone induced by mechanical excavation in Neogene sedimentary rock at Tono mine, central Japan", Eng. Geol., 56(1-2), 97-108 http://doi.org/10.1016/S0013-7952(99)00136-2.   DOI
27 Pusch, R. and Stanfors, R. (1992), "The zone of disturbance around blasted tunnels at depth", Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 29(5), 447-456. http://doi.org/10.1016/0148-9062(92)92629-Q.   DOI
28 Ranjbarnia, M., Fahimifar, A. and Oreste, P. (2014), "A simplified model to study the behavior of pre-tensioned fully grouted bolts around tunnels and to analyze the more important influencing parameters", J. Min. Sci., 50(3), 533-548. http://doi.org/10.1134/S1062739114030156.   DOI
29 Renaud, V., Balland, C. and Verdel, T. (2011), "Numerical simulation and development of data inversion in borehole ultrasonic imaging", J. Appl. Geophys., 73(4), 357-367. http://doi.org/10.1016/j.jappgeo.2011.02.007.   DOI
30 Sarfarazi, V., Haeri, H. and Shemirani, A.B. (2018), "Simulation of fracture mechanism of pre-holed concrete model under Brazilian test using PFC3D", Smart Struct. Syst., 22(6), 675-687. https://doi.org/10.12989/sss.2018.22.6.675.   DOI
31 Showkati, A., Maarefvand, P. and Hassani, H. (2015), "Stresses induced by post-tensioned anchor in jointed rock mass", J. Central South Univ., 22(4), 1463-1476. http://doi.org/10.1007/s11771-015-2664-x.   DOI
32 Song, H., Wang, C. and Jia, Y. (2002), "Principle of measuring broken rock zone around underground roadway with GPR and its application", J. China U. Min. Tech., 4, 43-46.
33 Tian, Z.H., Liu, J., Wang, X.G., Liu, L.P., Lv, X.B. and Zhang, X.T. (2019), "Deformation and failure mechanism exploration of surrounding rock in huge underground cavern", Struct. Eng. Mech., 72(2), 275-291. https://doi.org/10.12989/sem.2019.72.2.275.   DOI
34 Wei, S.J. and Li, B.F. (2013), "Anchor bolt body formation and instability mode under the influence of anchoring pretension", J. China Coal Soc., 38(12), 2126-2132. https://doi.org/10.13225/j.cnki.jccs.2013.12.018.
35 Tsang, C.F., Bernier, F. and Davies, C. (2005), "Geohydromechanical processes in the excavation damaged zone in crystalline rock, rock salt, and indurated and plastic clays-in the context of radioactive waste disposal", Int. J. Rock Mech. Min. Sci., 42(1), 109-125. http://doi.org/10.1016/j.ijrmms.2004.08.003.   DOI
36 Wang, H., Jiang, Y., Xue, S., Shen, B., Wang, C. and Lv, J. (2015), "Assessment of excavation damaged zone around roadways under dynamic pressure induced by an active mining process", Int. J. Rock Mech. Min. Sci., 77, 265-277. http://doi.org/10.1016/j.ijrmms.2015.03.032.   DOI
37 Wang, H.T., Li, S.C., Wang, Q., Wang, D.C., Li, W.T., Liu, P., Li, X.J. and Chen, Y.J. (2019), "Investigating the supporting effect of rock bolts in varying anchoring methods in a tunnel", Geomech. Eng., 19(6), 485-498. https://doi.org/10.12989/gae.2019.19.6.485.   DOI
38 Wang, J., Kang, H. and Gao, F. (2008), "Numerical simulation study on load transfer mechanisms and stress distribution characteristics of cable bolts", J. China Coal Soc., 33(1), 1-6.   DOI
39 Wang, X., Kang, H. and Gao, F. (2019), "Numerical investigation on the shear behavior of jointed coal mass", Comput. Geotech., 106, 274-285. https://doi.org/10.1016/j.compgeo.2018.11.005.   DOI
40 Xiang, L., Zhou, H.L., Shu, Z., Tan, S.H., Liang, G.Q. and Zhu, J. (2013), "GPR evaluation of the damaoshan highway tunnel: A case study", NDT E Int., 59, 68-76. http://doi.org/10.1016/j.ndteint.2013.05.004.   DOI
41 Zhang, B., Li, Y., Fantuzzi, N., Zhao, Y., Liu, Y.B. and Peng, B. (2019), "Investigation of the flow properties of CBM based on stochastic fracture network modeling", Materials, 12(15). https://doi.org/10.3390/ma12152387.
42 Xu, G., He, C. and Chen, Z. (2019), "Mechanical behavior of transversely isotropic rocks with non-continuous planar fabrics under compression tests", Comput. Geotech., 115, 103175. https://doi.org/10.1016/j.compgeo.2019.103175.   DOI
43 Yang, H., Cao, S., Li, Y., Fan, Y., Wang, S. and Chen, X. (2016), "Assessment of excavation broken zone around gateways under various geological conditions: A case study in Sichuan province, China", Minerals, 6(3), 72. https://doi.org/10.3390/min6030072.   DOI
44 Yang, H.Y., Liu, Y.B., Cao, S.G., Pan, R.K., Wang, H., Li, Y. and Luo, F. (2020), "A caving self-stabilization bearing structure of advancing cutting roof for gob-side entry retaining with hard roof stratum", Geomech. Eng., 21(1), 23-33. https://doi.org/10.12989/gae.2020.21.1.023.   DOI
45 Yin, D.W., Chen, S.J., Chen, B., Liu, X.Q. and Ma, H.F. (2018), "Strength and failure characteristics of the rock-coal combined body with single joint in coal", Geomech. Eng., 15(5), 1113-1124. https://doi.org/10.12989/gae.2018.15.5.1113.   DOI
46 Yu, W., Gao, Q. and Zhu, C. (2010), "Study of strength theory and application of overlap arch bearing body for deep soft surrounding rock", Chin. J. Rock Mech. Eng., 29(10), 2134-2142.
47 Zhang, P., Li, Y., Zhao, Y. and Guo, L. (2012), "Application and analysis on structure exploration of coal seam by mine ground penetrating radar", Proceedings of the 2012 14th International Conference on Ground Penetrating Radar, Shanghai, China, June.