Browse > Article
http://dx.doi.org/10.12989/gae.2020.20.1.067

Experimental study on nano silica modified cement base grouting reinforcement materials  

Zhou, Fei (College of Mining and Safety Engineering, Shandong University of Science and Technology)
Sun, Wenbin (Shandong Key Laboratory of Wisdom Mine Information Technology, Shandong University of Science and Technology)
Shao, Jianli (College of Mining and Safety Engineering, Shandong University of Science and Technology)
Kong, Lingjun (College of Mining and Safety Engineering, Shandong University of Science and Technology)
Geng, Xueyu (The University of Warwick Coventry)
Publication Information
Geomechanics and Engineering / v.20, no.1, 2020 , pp. 67-73 More about this Journal
Abstract
With the increasing number of underground projects, the problem of rock-water coupling catastrophe has increasingly become the focus of safety. Grouting reinforcement is gradually applied in subway, tunnel, bridge reinforcement, coal mine floor and other construction projects. At present, cement-based grouting materials are easy to shrink and have low strength after solidification. In order to overcome the special problems of high water pressure and high in-situ stress in deep part and improve the reinforcement effect. In view of the mining conditions of deep surrounding rock, a new type of cement-based reinforcement material was developed. We analyses the principle and main indexes of floor strengthening, and tests and optimizes the indexes and proportions of the two materials through laboratory tests. Then, observes and compares the microstructures of the optimized floor strengthening materials with those of the traditional strengthening materials through scanning electron microscopy. The test results show that 42.5 Portland cement-based grouting reinforcement material has the advantages of slight expansion, anti-dry-shrinkage, high compressive strength and high density when the water-cement ratio is 0.4, the content of bentonite is 4%, and the content of Nano Silica is 2.5%. The reinforcement effect is better than other traditional grouting reinforcement materials.
Keywords
floor reinforcement with grunting; nano silica; scanning electron microscope;
Citations & Related Records
Times Cited By KSCI : 10  (Citation Analysis)
연도 인용수 순위
1 Liu, X.F., Wang, J.G., Huang, K. and Li, F.Y. (2019), "Experimental study on dynamic water grouting of modified water-soluble polyurethane", KSCE J. Civ. Eng., 32(3), 375-380. https://doi.org/10.1007/s12205-019-0086-2.
2 Morsy, M.S., Shoukry, H., Mokhtar, M.M., Ali, A.M. and El-Khodary, S.A. (2018), "Facile production of nano-scale metakaolin: An investigation into its effect on compressive strength, pore structure and microstructural characteristics of mortar", Constr. Build. Mater., 172, 243-250. https://doi.org/10.1016/j.conbuildmat.2018.03.249   DOI
3 Ni, H.G., Sun, F.H., Yang, X.Z. and Wang, X.H. (2005), "Experimental study of clay hardening grouts for roadbed reinforcements", Chin. J. Rock Mech. Eng., 24(7), 1242-1247. https://doi.org/10.3321/j.issn:1000-6915.2005.07.027   DOI
4 Packer, M., Newman, R., Prangley, C. and Heath, I. (2018), "Permeation grouting and excavation at Victoria station, London", Proc. Inst. Civ. Eng. Geotech. Eng., 171(3), 267-281. https://doi.org/10.1680/jgeen.17.00115.   DOI
5 Taha, M.R., Alsharef, J.M.A., Khan, T.A., Aziz, M. and Gaber, M. (2018), "Compressive and tensile strength enhancement of soft soils using nanocarbons", Geomech. Eng., 16(5), 559-567. https://doi.org/10.12989/gae.2018.16.5.559.   DOI
6 Samaila, S., Nor Zurairahetty, M.Y., Kamarudin, A. and Nazri, A. (2019), "Improving the strength of weak soil using polyurethane grouts: A review", Constr. Build. Mater., 202, 738-752. https://doi.org/10.1016/j.conbuildmat.2019.01.048   DOI
7 Seo, H., Park, K.H., Kim, C.J., Kim, H.C. and Kim, D. (2019), "Development of reinforcement grout materials using blast furnace slag powder and aramid fiber", J. Kor. Geosynth. Soc., 18(1), 67-77. https://doi.org/10.12814/jkgss.2019.18.1.067.   DOI
8 Song, X.F. (2008), "Composition design of clay cement slurry in coal-seam bed plate consolidation", Proceedings of the 2008 National Mine Construction Conference, Huangshan, Anhui, China, July.
9 Sun, W.B., Du, H.Q., Zhou, F. and Shao, J.L. (2019), "Experimental study of crack propagation of rock-like specimens containing conjugate fractures", Geomech. Eng., 17(4), 323-331. https://doi.org/10.12989/gae.2019.17.4.323.   DOI
10 Zhang, G.C., Wen, Z.J. and Liang, S.J. (2019), "Ground response of a gob-side entry in a longwall panel extracting 17 m-thick coal seam: A case study", Rock Mech. Rock Eng., 1-20. https://doi.org/10.1007/s00603-019-01922-5.
11 Sun W.B., Xue Y.C., Li T.T. and Liu W.T. (2019), "Multi-field coupling of water inrush channel formation in a deep mine with a buried fault", Mine Water Environ., 38(3), 528-535. https://doi.org/10.1007/s10230-019-00616-2.   DOI
12 Wang, S., Wang, J.F., Yuan, C.P., Chen, L.Y. Xu, S.T. and Guo, K.B (2018), "Development of the nano-composite cement: Application in regulating grouting in complex ground conditions", J. Mountain Sci., 15(7), 1572-1584. https://doi.org/10.1007/s11629-017-4729-9.   DOI
13 Wang, T., Liu, S.H. and Lu, Y. (2019), "Laboratory experiments on the improvement of rockfill materials with composite grout", Geomech. Eng., 17(3), 309-318. https://doi.org/10.12989/gae.2019.17.3.307.
14 Wu, Q. (2014), "Progress, problems and prospects of prevention and control technology of mine water and reutilization in China", J. Chin. Coal Soc., 39(5), 795-805. http://doi.org/10.13225/j.cnki.jccs.2014.0478.
15 Xiang, J.C., Liu, L.P., Cui, X.M., He, Y., Zheng, G.J. and Shi, C.J. (2018), "Effect of limestone on rheological, shrinkage and mechanical properties of alkali - Activated slag/fly ash grouting materials", Constr. Build. Mater., 191, 1285-1292. http://doi.org/10.1016/j.conbuildmat.2018.09.209.   DOI
16 Xu, Y.C., Li, J.H. and Liu, B.Z. (2014), "Reinforcement of working face by grouting in floor in Jiaozuo coal mining area", Coal Geol. Explor., 42(4), 50-54. http://doi.org/10.3969/j.issn.1001-1986.2014.04.011.
17 Zhang, C., Fu, J.Y. and Yang, J.S. (2018c), "Formulation and performance of grouting materials for underwatershield tunnel construction in karst ground". Constr. Build. Mater., 187, 327-338. http://doi.org/10.1016/j.conbuildmat.2018.07.054   DOI
18 Yu, J. (2013), "Study on construction scheme optimization of shallow-buried tunnel undercrossing existing metro station with zero-clearance", Tunn. Construct., 33(01), 22-26.
19 Zhang, C., Yang, J.S., Xie, Y.P., Gong, F.H., Liang, X., Lei, J.S. and Su, B.Z. (2018a), "Experiment and application for grouting materials for karst under conditions of underground water flow before shield tunneling", Chin. J. Rock Mech. Eng., 37(9), 2120-2130. http://doi.org/10.13722/j.cnki.jrme.2018.0196.
20 Zhang, D.M., Huang, Z.K., Wang, R.L. Yan, J.Y. and Zhang, J. (2018b), "Grouting-based treatment of tunnel settlement: Practice in Shanghai", Tunn. Undergr. Sp. Technol., 80, 181-196. http://doi.org/10.1016/j.tust.2018.06.017.   DOI
21 Zhang, C., Yang, J. and Xie, Y. (2018d), "Experiment and application for grouting materials for karst under conditions of underground water flow before shield tunneling", Chin. J. Rock Mech. Eng., 37(9), 2120-2130. http://doi.org/10.13722/j.cnki.jrme.2018.0196.
22 Zhang, J.X. and Sun, Y.N. (2019), "Experimental and mechanism study of a polymer foaming grouting material for reinforcing broken coal mass", J. Civ. Eng., 23(1), 346-355. http://doi.org/10.1007/s12205-018-0780-5.
23 Zhao J.H., Zhang X.G., Jiang N., Yin L.M. and Guo W.J. (2020), "Porosity zoning characteristics of fault floor under fluid-solid coupling", Bull. Eng. Geol. Environ. http://doi.org/10.1007/s10064-019-01701-0.
24 Gong, B., Jiang, Y.J., Okatsu, K., Wu, X.Z., Teduka, J. and Aoki, K. (2018), "The seepage control of the tunnel excavated in highpressure water condition using multiple times grouting method", Processes, 6(9), https://doi.org/10.3390/pr6090159.
25 Alyousef, R., Benjeddou, O., Soussi, C., Khadimallah, M.A. and Mohamed, A.M. (2019), "Effects of incorporation of marble powder obtained by recycling waste sludge and limestone powder on rheology, compressive strength, and durability of self-compacting concrete", Adv. Mater. Sci. Eng. https://doi.org/10.1155/2019/4609353   DOI
26 Cheng, P., Zhao, L.H., Li, Q., Li, L. and Zhang, S.Y. (2019), "Water inflow prediction and grouting design for tunnel considering nonlinear hydraulic conductivity", KSCE J. Civ. Eng., 23(9), 4132-4140. https://doi.org/10.1007/s12205-019-0306-9   DOI
27 Cheng, Z., Pan, W., Li, X. and Sun, W. (2019), "Numerical simulation on strata behaviours of TCCWF influenced by coalrock combined body", Geomech. Eng., 19(3), 269-282. https://doi.org/10.12989/gae.2019.19.3.269.   DOI
28 Feng, B.C. (2012), "Study on anti-dry-shrinkage properties of nano-cement concrete", Transpoworld, 01,156-157. https://doi.org/10.16248/j.cnki.11-3723/u.2012.01.056
29 Ge, Y.M., Long, W. and Song, H.J. (2018), "Evaluation of the performance of cement based grouting materials", Soil Eng. Found., 32(04), 437-439, 448.
30 Grizelda, D., Kearsley, E.P., Mc Donald, J.M., Kruger, R.A. and van der Merwe, E.M. (2018), "Chemical and mechanical activation of hybrid fly ash cement", Adv. Cem. Res., 30(9), 399-412. https://doi.org/10.1680/jadcr.17.00156.   DOI
31 Guo, D.M., Cheng, Z., Qi, Y.Q. and Xue, L. (2018), "Experiment of performance on water glass-nano silica polyurethane composites injecting paste material", Modern Min., 34(4),157-160, 170.
32 Li, J.B. (2016), "Study on water inrush mechanism and prevention mechanism of double-high seam floor grouting reinforcement working face", Ph.D. Dissertation, China University of Mining and Technology, Beijing, China.
33 Kong, D., Cheng, Z. and Zheng, S. (2019), "Study on failure mechanism and stability control measures in large-cuttingheight coal mining face with deep-buried seam", Bull. Eng. Geol. Environ., 78(8), 6143-6157. https://doi.org/10.1007/s10064-019-01523-0.   DOI