Browse > Article
http://dx.doi.org/10.12989/gae.2019.18.6.615

Performance evaluation of the lightweight concrete tapered piles under hammer impacts  

Tavasoli, Omid (Department of Civil Engineering, East Tehran Branch, Islamic Azad University)
Ghazavi, Mahmoud (Department of Civil Engineering, K. N. Toosi University of Technology)
Publication Information
Geomechanics and Engineering / v.18, no.6, 2019 , pp. 615-626 More about this Journal
Abstract
Lightweight concrete (LWC) provides an attractive alternative to conventional piles by improving the durability of deep foundations. In this paper, the drivability of cylindrical and tapered piles made of lightweight and common concrete (CC) under hammer impacts was investigated by performing field tests and numerical analysis. The different concrete mixtures were considered to compare the mechanical properties of light aggregate which replaced instead of the natural aggregate. Driving tests were also conducted on different piles to determine how the pile material and geometric configurations affect driving performance. The results indicated that the tapering shape has an appropriate effect on the drivability of piles and although lower driving stresses are induced in the LWC tapered pile, their final penetration rate was more than that of CC cylindrical pile under hammer impact. Also by analyzing wave propagation in the different rods, it was concluded that the LWC piles with greater velocity than others had better performance in pile driving phenomena. Furthermore, LWC piles can be driven more easily into the ground than cylindrical concrete piles sometimes up to 50% lower hammer impacts and results in important energy saving.
Keywords
pile driving; lightweight concrete (LWC); tapered pile; field testing; signal matching; finite difference method;
Citations & Related Records
Times Cited By KSCI : 5  (Citation Analysis)
연도 인용수 순위
1 Al-Khaiat, H. and Haque, M.N. (1998), "Effect of initial curing on early strength and physical properties of lightweight concrete", Cement Concrete Res., 28(6), 859-866. https://doi.org/10.1016/S0008-8846(98)00051-9.   DOI
2 Canakci1a, H. and Hamed, M. (2017), "Experimental study on axial response of different pile materials in organic soil", Geomech. Eng., 12(6), 899-917. https://doi.org/10.12989/gae.2017.12.6.899.   DOI
3 Choi, Y.W., Kim, Y.J., Shin, H.C. and Moon, H.Y. (2006), "An experimental research on the fluidity and mechanical properties of high-strength lightweight self-compacting concrete", Cement Concrete Res., 36(9), 1595-1602. https://doi.org/10.1016/j.cemconres.2004.11.003   DOI
4 Cusson, D. and Hoogeveen, T. (2008), "Internal curing of highperformance concrete with pre-soaked fine lightweight aggregate for prevention of autogenous shrinkage cracking", Cement Concrete Res., 38(6), 757-765. https://doi.org/10.1016/j.cemconres.2008.02.001.   DOI
5 Ghazavi, M. (2007), "Analysis of kinematic seismic response of tapered piles", Int. J. Geotech. Geol. Eng., 25(1), 37-44. https://doi.org/10.1007/s10706-006-0004-5   DOI
6 Ghazavi, M. (2008), "Response of tapered piles to axial harmonic loading", Can. Geotech. J., 45(11), 1622-1628. https://doi.org/10.1139/T08-073.   DOI
7 Ghazavi, M. and Ahmadi, H.A. (2008). "Long-term capacity of driven non-uniform piles in cohesive soil-field load tests", Proceedings of the 8th International Conference on the Application of Stress Wave Theory to Piles, Lisbon, Portugal, September.
8 Ghazavi, M. and Tavasoli, O. (2012), "Characteristics of nonuniform cross-section piles in drivability", Soil Dyn. Earthq. Eng., 43, 287-299. https://doi.org/10.1016/j.soildyn.2012.07.017.   DOI
9 Ghazavi, M., Williams, D.J. and Morris, P.H. (1997), "Analysis of axially loaded piles embedded in layered deposit", Proceedings of the 2nd International Conference on the Application of Numerical Methods in Engineering, Selangor, Malaysia, June.
10 Hataf, N. and Shafaghat, A. (2015), "Numerical comparison of bearing capacity of tapered pile groups using 3D FEM", Geomech. Eng., 9(5), 547-567. https://doi.org/10.12989/gae.2015.9.5.547.   DOI
11 Itasca, (2002), Fast Lagrangian Analysis of Continua in Three Dimensions (FLAC3D), Version 2.10, Itasca Consulting Group, Minnesota, U.S.A.
12 Jonker, G. and Foeken, R.J. (2000), "Hammer and pile cushion optimization." Proceeding of 6th International Symposium on the Application of Stress Wave Theory to Piles, Sao Paulo, Brazil, September.
13 Kilic A., Atis C.D., Yasar E. and Ozcan F. (2003), "High strength lightweight concrete made with scoria aggregate containing mineral admixtures", Cement Concrete Res., 33, 1595-1599. https://doi.org/10.1016/S0008-8846(03)00131-5.   DOI
14 Kumara, J.J., Kurashina, T. and Kikuchi, Y. (2016), "Effects of pile geometry on bearing capacity of open-ended piles driven into sands", Geomech. Eng., 11(3), 385-400. https://doi.org/10.12989/gae.2016.11.3.385.   DOI
15 Maraveas, C. (2018), "A new lightweight steel bridge founded in peat-optimal design and soil improvement", Int. J. Bridge Eng., 6(1), 73-90.
16 Masouleh, S.F. and Fakharian, K. (2008), "Application of a continuum numerical model for pile driving analysis and comparison with a real case", Comput. Geotech., 35(3), 406-418. https://doi.org/10.1016/j.compgeo.2007.08.009.   DOI
17 Owens, P. and Newman, J. (1999), "Structural lightweight aggregate concrete-the future?", Concrete, 33(10), 45-47.
18 Sormeie, A. and Ghazavi, M., (2018), "Analysis of non-uniform piles driven into cohesive soils", Soil Dyn. Earthq. Eng., 109, 282-285. https://doi.org/10.1016/j.soildyn.2018.03.014.   DOI
19 Rybnikov, A.M. (1990), "Experimental investigations of bearing capacity of bored-cast-in-place tapered piles", Soil Mech. Found. Eng., 27, 48-51. https://doi.org/10.1007/BF02306100.   DOI
20 Sakr M., El Naggar M.H., Nehdi M. (2007), "Wave equation analyses of tapered FRP-concrete piles in dense sand", Soil Dyn. Earthq. Eng., 27(2), 168-188. https://doi.org/10.1016/j.soildyn.2005.11.002.
21 Tavasoli, O. and Ghazavi, M. (2016), "Analysis of non-uniform cross section hollow piles in drivability", Bull. Earthq. Sci. Eng., 2(4), 55-70 (in Persian).
22 Tavasoli, O. and Ghazavi, M. (2018), "Wave propagation and ground vibrations due to non-uniform cross-sections piles driving", Comput. Geotech., 104, 13-21. https://doi.org/10.1016/j.compgeo.2018.08.010.   DOI
23 Tavasoli, O. and Ghazavi, M. (2019), "Driving behavior of stepped and tapered offshore piles due to hammer blows", Mar. Georesour. Geotechnol., 1-14. https://doi.org/10.1080/1064119X.2019.1609631.
24 Tokhi, H., Ren, G. and Li, J. (2015), "An application of wave equation analysis program to pile dynamic formulae", Geomech. Eng., 9(3), 345-360. https://doi.org/10.12989/gae.2015.9.3.345.   DOI
25 Topcu, I.B. (1997), "Semi-lightweight concretes produced by volcanic slags", Cement Concrete Res., 27, 15-21. https://10.1016/S0008-8846(96)00190-1.   DOI
26 Smith, E.A.L. (1960), "Pile driving analysis by the wave equation", J. Soil Mech. Found. Div., 86(4), 35-61.   DOI
27 Ukritchon, B., Faustino, J.C. and Keawsawasvong, S. (2016), "Numerical investigations of pile load distribution in pile group foundation subjected to vertical load and large moment", Geomech. Eng., 10(5), 577-598. http://dx.doi.org/10.12989/gae.2016.10.5.577.   DOI
28 Wei, J.Q. and El Naggar, H. (1998), "Experimental study of axial behaviour of tapered piles", Can. Geotech. J., 35(4), 641-654. https://doi.org/10.1139/t98-033.   DOI