Browse > Article
http://dx.doi.org/10.12989/gae.2019.17.3.247

Effect of horizontal at rest pressure (Po) on elastic modulus from pressuremeter testing  

Alzubaidi, Radhi M. (Civil Engineering Department, University of Sharjah)
Publication Information
Geomechanics and Engineering / v.17, no.3, 2019 , pp. 247-252 More about this Journal
Abstract
Modulus of deformation of soil is an essential parameter used for design analysis of foundations, despite its importance; little attention is paid to developing empirical models for predicting the sensitivity of deformation moduli to other parameters that obtained from the pressuremeter tests. Various methods of analysis used to predict the horizontal at rest pressure from pressuremeter testing ($P_o$), these values showed distinctive variations, five methods used to evaluate the values of horizontal at rest pressure, these values been used to evaluate the modulus of elasticity using three methods of analysis. The values of modulus showed distinctive increase when the values of horizontal at rest pressure increase for the same pressuremeter test, these increases may reach to 65%. This sensitivity of the moduli to values of horizontal lead the author to propose some reliable methods of analysis for both the horizontal at rest pressure and the modulus of deformation from pressuremeter testing.
Keywords
pressuremeter; modulus of elasticity; horizontal at rest pressure; sensitivity;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 Miller, G., Tan, N. and Muraleetharan, K. (2012), "Influence of matric duction on pressuremeter modulus", Proceedings of the GeoCongress 2012: State of the Art and Practice in Geotechnical Engineering, Oakland, California, U.S.A., March.
2 Oztoprak, S., Sargin, S.K., Uyar, H. and Bozbey, I. (2018), "Modeling of pressuremeter tests to characterize the sands", Geomech. Eng., 14(6), 509-517   DOI
3 Palmer, A.C. (1972), "Undrained plane-strain expansion of cylindrical cavity in clay; Simple nterpretation of pressuremeter test", Geotechnique, 22(3), 451-457.   DOI
4 Vincent, S. and Maxime, S. (2016), "Stress path during pressuremeter test and link between shear modulus and Menard pressuremeter modulus in unsaturated fine soils", Proceedings of the 3rd European Conference on Unsaturated Soil, Paris, France, September.
5 Menard, L. (1957), Mesures in situ des Proprietes Physiques des Sols, 357-376
6 Alzubaidi, R. (2015), "A new method for interpreting pressuremeter data to estimate in situ horizontal stress", Arab. J. Geosci., 8(7), 5295-5302.   DOI
7 Dyka, I. (2012), "Use of laboratory tests of soil modulus in modeling pile behavior", Stud. Geotech. Mech., 34(3), 53-61.   DOI
8 Farid, M., Abdelkader, H. and Salah, L.M. (2013), "Analysis of correlations between cone penetrometer and pencel pressuremeter parameters", Proc. Eng., 54, 505-515.   DOI
9 Fawaz, A., Hagechehade, F. and Farah, E. (2014), "A study of the pressuremeter modulus and its comparison to the elastic modulus of soil", Stud. Civ. Eng. Arch., 3, 7-15.
10 Gibson, R. and Anderson, W. (1961), "In-situ measurement of soils properties with the pressuremeter", Civ. Eng. Publ. Work. Rev., 56(658), 615-618.
11 Komurlu, E., Kesimal, A. and Hasanpour, R. (2015), "In situ horizontal stress effect on plastic zone around circular underground openings excavated in elastic zones", Geomech. Eng., 8(6), 783-799.   DOI
12 Kurlenya, M.V., Serdyukov, S.V. and Patutin, A.V. (2015), "Assessment of deformation properties of rocks by pressuremeter testing in hydrofractured interval", J. Min. Sci., 51(4), 718-723.   DOI
13 Likitlersuang, S., Surarak, C., Wanatowski, D., Oh, E. and Balasubramaniam, A. (2013) "Geotechnical parameters from pressuremeter tests for MRT Blue Line extension in Bangkok", Geomech. Eng., 5(2), 99-118.   DOI
14 Marcil, L., Sedran, G. and Failmezger, R. (2015), "Values of presssuremeter modulus and limit pressure inferred from stress or strain controlled PMT testing", Proceedings of the 7th International Symposium on Pressuremeters, Hamammet, Tunsia.