Browse > Article
http://dx.doi.org/10.12989/gae.2019.17.1.019

A numerical analysis of the equivalent skeleton void ratio for silty sand  

Dai, Bei-Bing (School of Civil Engineering, Sun Yat-sen University)
Yang, Jun (Department of Civil Engineering, The University of Hong Kong)
Gu, Xiao-Qiang (Department of Geotechnical Engineering & Key Laboratory of Geotechnical and Underground Engineering of the Ministry of Education, Tongji University)
Zhang, Wei (College of Water Conservancy and Civil Engineering, South China Agricultural University)
Publication Information
Geomechanics and Engineering / v.17, no.1, 2019 , pp. 19-30 More about this Journal
Abstract
Recent research on the behavior of silty sand tends to advocate the use of equivalent skeleton void ratio to characterize the density state of this type of soil. This paper presents an investigation to explore the physical meaning of the equivalent skeleton void ratio by means of DEM simulations for assemblies of coarse and fine particles under biaxial shear. The simulations reveal that the distribution pattern of fine particles in the soil skeleton plays a crucial role in the overall macroscopic response: The contractive response observed at the macro scale is mainly caused by the movement of fine particles out of the force chains whereas the dilative response is mainly associated with the migration of fine particles into the force chains. In an assembly of coarse and fine particles, neither all of the fine particles nor all of the coarse ones participate in the force chains to carry the external loads, and therefore a more reasonable definition for equivalent skeleton void ratio is put forward in which a new parameter d is introduced to take into account the fraction of coarse particles absent from the force chains.
Keywords
silty sand; equivalent skeleton void ratio; fine particles; force chain; anisotropy; discrete element method;
Citations & Related Records
Times Cited By KSCI : 5  (Citation Analysis)
연도 인용수 순위
1 Bolton, M.D., Nakata, Y. and Cheng, Y.P. (2008), "Micro- and Macro-mechanical behavior of DEM crushable materials", Geotechnique, 58(6), 471-480.   DOI
2 Carraro, J.A.H., Bandini, P. and Salgado, R. (2003), "Liquefaction resistance of clean and non-plastic silty sands based on cone penetration resistance", J. Geotech. Geoenviron. Eng., 129(11), 965-976.   DOI
3 Chang, C.S. and Yin, Z.Y. (2011), "Micromechanical modeling for behavior of silty sand with influence of fine content", Int. J. Solids Struct., 48(19), 2655-2667.   DOI
4 Chang, C.S., Meidani, M. and Deng, Y. (2017), "A comparison model for sand-silt mixtures based on the concept of active and inactive voids", Acta Geotech., 12(6), 1301-1317.   DOI
5 Cundall, P.A. (1971), "A computer model for simulating progressive, large scale movements in blocky rock systems", Proceedings of the International Symposium on Rock Mechanics, Nancy, France, October.
6 Dai, B.B. and Yang, J. (2017), "On shear strength of assemblies of frictionless particles", Int. J. Geomech., 17(11), 04017102.   DOI
7 Dai, B.B., Yang, J. and Zhou, C.Y. (2017), "Micromechanical origin of angle of repose in granular materials", Granul. Matter, 19(2), 24.   DOI
8 Georgiannou, V.N., Burland, J.B. and Hight, H.W. (1990), "The undrained behavior of clayey sands in triaxial compression and extension", Geotechnique, 40(3), 431-449.   DOI
9 Gu, X.Q., Huang, M.S., and Qian, J.G. (2014), "DEM investigation on the evolution of microstructure in granular soils under shearing", Granul. Matter, 16(1), 91-106.   DOI
10 Hsiao, D.H. and Phan, V.T.A. (2014), "Effects of silt contents on the static and dynamic properties of sand-silt mixtures", Geomech. Eng., 7(3), 297-316.   DOI
11 Hyodo, M., Wu, Y., Kajiyama, S., Nakata, Y. and Yoshimoto, N. (2017), "Effect of fines on the compression behaviour of poorly graded silica sand", Geomech. Eng., 12(1), 127-138.   DOI
12 Ishihara, K. (1993), "Liquefaction and flow failure during earthquakes", Geotechnique, 43(3), 351-415.   DOI
13 Itasca. (2005), User's Manual for PFC2D, Itasca Consulting Group, Inc.
14 Kenney, T.C. (1977), "Residual strengths of mineral mixtures", Proceedings of the 9th International Conference on Soil Mechanics and Foundation Engineering, Tokyo, Japan, July.
15 Dai, B.B., Yang, J. and Luo, X. (2015), "A numerical analysis of the shear behavior of granular soil with fines", Particuology, 21, 160-172.   DOI
16 Kuerbis, R.H., Negussey, D. and Vaid, Y.P. (1988), "Effect of gradation and fines content on the undrained response of sand", Geotech. Special Publ., 21, 330-345.
17 Lade, P.V. and Yamamuro, J.A. (1997), "Effects of non-plastic fines on static liquefaction of sands", Can. Geotech. J., 34(6), 918-928.   DOI
18 Lashkari, A. (2014), "Recommendations for extension and recalibration of an existing sand constitutive model taking into account varying non-plastic fines content", Soil Dyn. Earthq. Eng., 61, 212-238.   DOI
19 Ma, G., Chang, X.L., Zhou, W. and Ng, T.T. (2014), "Mechanical response of rockfills in a simulated true triaxial test: A combined FDEM study" Geomech. Eng., 7(3), 317-333.   DOI
20 Mitchell, J.K. (1976), Fundamentals of Soil Behaviors, Wiley, New York, U.S.A.
21 Ni, Q., Tan, T.S., Dasari, G.R. and Hight, D.W. (2004), "Contribution of fines to the compressive strength of mixed soils", Geotechnique, 54(9), 561-569.   DOI
22 Mohammadi, A. and Qadimi, A. (2015), "A simple critical state approach to predicting the cyclic and monotonic response of sands with different fines contents using the equivalent intergranular void ratio", Acta Geotech., 10(5), 587-606.   DOI
23 Monkul, M.M. (2013), "Influence of gradation on shear strength and volume change behavior of silty sands", Geomech. Eng., 5(5), 401-417.   DOI
24 Murthy, T.G., Loukidis, D., Carraro, J. A.H. and Salgado, R. (2007), "Undrained monotonic response of clean and silty sands", Geotechnique, 57(3), 273-288.   DOI
25 Patil, U.D., Puppala, A.J., Hoyos, L.R. and Pedarla, A. (2017), "Modeling critical-state shear strength behavior of compacted silty sand via suction-controlled triaxial testing", Eng. Geol., 231, 21-33.   DOI
26 Pitman, T.D., Robertson, P.K. and Sego, D.C. (1994), "Influence of fines on the collapse of loose sands", Can. Geotech. J., 31(5), 728-739.   DOI
27 Polito, C.P. and Martin II, J.R. (2001), "Effects of non-plastic fines on the liquefaction resistance of sands", J. Geotech. Geoenviron. Eng., 127(5), 408-415.   DOI
28 Rahman, M., Lo, S. and Dafalias, Y. (2014), "Modelling the static liquefaction of sand with low-plasticity fines", Geotechnique, 64(11), 881-894.   DOI
29 Porcino, D.D. and Diano, V. (2017), "The influence of non-plastic fines on pore water pressure generation and undrained shear strength of sand-silt mixtures", Soil Dyn. Earthq. Eng., 101, 311-321.   DOI
30 Qian, J.G., You, Z., Huang, M.S. and Gu, X.Q. (2013), "A micromechanics-based model for estimating localized failure with effects of fabric anisotropy", Comput. Geotech., 50, 90-100.   DOI
31 Rahman, M.M., Lo, S.R. and Gnanendran C.T. (2008), "On equivalent granular void ratio and steady state behavior of loose sand with fines", Can. Geotech. J., 45(10), 1439-1456.   DOI
32 Rothenburg, L. and Bathurst, R.J. (1989), "Analytical study of induced anisotropy in idealized granular materials", Geotechnique, 39(4), 601-614.   DOI
33 Thevanayagam, S. and Mohan, S. (2000), "Intergranular state variables and stress-strain behaviour of silty sands", Geotechnique, 50(1), 1-23.   DOI
34 Thevanayagam, S., Shenthan, T., Mohan, S. and Liang, J. (2002), "Undrained fragility of clean sands, silty sands and sandy silts", J. Geotech. Geoenviron. Eng., 128(10), 849-859.   DOI
35 Thornton, C. (2000), "Numerical simulations of deviatoric shear deformation of granular media", Geotechnique, 47(2), 319-329.   DOI
36 Vahidi-Nia, F., Lashkari, A. and Binesh, S.M. (2015), "An insight into the mechanical behavior of binary granular soils", Particuology, 21, 82-89.   DOI
37 Xu, W.J., Li, C.Q. and Zhang, H.Y. (2015), "DEM analyses of the mechanical behavior of soil and soil-rock mixture via the 3D direct shear test", Geomech. Eng., 9(6), 815-827.   DOI
38 Yan, W. and Zhang, L. (2013), "Fabric and the critical state of idealized granular assemblages subject to biaxial shear", Comput. Geotech., 49, 43-52.   DOI
39 Yamamuro, J.A. and Lade, P.V. (1997), "Static liquefaction of very loose sands", Can. Geotech. J., 34(6), 905-917.   DOI
40 Yamamuro, J.A. and Lade, P.V. (1999), "Experiments and modelling of silty sands susceptible to static liquefaction", Mech. Cohes. Frict. Mater. Struct., 4(6), 545-564.   DOI
41 Yang, J. and Dai, B.B. (2011), "Is the quasi-steady state a real behaviour? A micromechanical perspective", Geotechnique, 61(2), 175-184.   DOI
42 Yang, J. and Wei, L.M. (2012), "Collapse of loose sand with the addition of fines: the role of particle shape", Geotechnique, 62(12), 1111-1125.   DOI
43 Yang, J., Wei, L.M. and Dai, B.B. (2015), "State variables for silty sands: Global void ratio or skeleton void ratio?", Soil. Found., 55(1), 99-111.   DOI
44 Yang, S.L., Sandven, R. and Grande, L. (2006), "Steady-state lines of sand-silt mixtures", Can. Geotech. J., 43(11), 1213-1219.   DOI
45 Yimsiri, S. and Soga, K. (2010), "DEM analysis of soil fabric effects on behaviour of sand", Geotechnique, 60(6), 483-495.   DOI
46 Zhou, W., Yang, L., Ma, G., Xu, K., Lai, Z. and Chang, X. (2017), "DEM modeling of shear bands in crushable and irregularly shaped granular materials", Granul. Matter, 19: 25.   DOI
47 Zlatovic, S. and Ishihara, K. (1997), "Normalized behaviors of very loose non-plastic soils: effects of fabric", Soil. Found., 37(4), 47-56.   DOI
48 Bobei, D.C., Lo, S.R., Wanatowski, D., Gnanendran, C.T. and Rahman, M.M. (2009), "Modified state parameter for characterizing static liquefaction of sand with fines", Can. Geotech. J., 46(3), 281-295.   DOI