1 |
Sun, Q., Lu, C., Cao, L.W. and Li, W.C. (2016), "Thermal properties of sandstone after treatment at high temperature", J. Rock Mech. Min. Sci., 85, 60-66.
DOI
|
2 |
Wang, E.Y., Jia, H.L., Song, D.Z., Li, N. and Qian, W.H. (2014), "Use of ultra-low-frequency electromagnetic emission to monitor stress and failure in coal mines", J. Rock Mech. Min. Sci., 70, 16-25.
DOI
|
3 |
Wang, E.Y., Kong, B., Liang, J.Y., Liu, X.F. and Liu, Z.T. (2016), "Experimental study of electromagnetic radiation during coal heating", J. China Univ. Min. Technol., 45(2), 205-210.
|
4 |
Wang, H., Nie, W., Cheng, W., Liu, Q. and Jin, H. (2018a), "Effects of air volume ratio parameters on air curtain dust suppression in a rock tunnel's fully-mechanized working face", Adv. Powder Technol., 29(2), 230-244.
DOI
|
5 |
Wang, H., Cheng, W., Sun, B., Yu, H. and Jin, H. (2018b), "The impacts of the axial-to-radial airflow quantity ratio and suction distance on air-curtain dust control in a fully mechanized coal face", Environ. Sci. Pollut. Res., 25(8), 7808-7822.
DOI
|
6 |
Agioutantis, Z., Kaklis, K., Mavrigiannakis, S., Verigakis, M., Vallianatos, F. and Saltas, V. (2016), "Potential of acoustic emissions from three point bending tests as rock failure precursors", J. Min. Sci. Technol., 26(1), 155-160.
DOI
|
7 |
Wang, C., Xiao, Y., Li, Q., Deng, J. and Wang, K. (2018c), "Free radicals, apparent activation energy, and functional groups during low-temperature oxidation of jurassic coal in northern Shaanxi", J. Min. Sci. Technol., 28(3), 469-475.
DOI
|
8 |
Chen, L.J., Zhao, H.B., Gu, H.T. and Chen, J.T. (2005), "Study on Microstructure of Coal Roof Sandstone Under High Temperature", J. Chin. Univ. Min. Technol., 34(4), 443-446.
|
9 |
Cheng, W., Hu, X., Xie, J. and Zhao, Y. (2017a), "An intelligent gel designed to control the spontaneous combustion of coal: Fire prevention and extinguishing properties", Fuel, 210, 826-835.
DOI
|
10 |
Cheng, W., Hu, X., Xie, J. and Zhao, Y. (2017b), "Preparation and swelling properties of poly(acrylic acid-co-acrylamide) composite hydrogels", e-Polymers, 17(1), 95-106.
|
11 |
Wang, J., Kang, H., Liu, J., Chen, P., Fan, Z. and Yuan, W. (2018d), "Layout strategic research of green coal resource development in china", J. China Univ. Min. Technol., 47(1), 15-20.
|
12 |
Wang, X., Wen, Z., Jiang, Y. and Huang, H. (2017), "Experimental study on mechanical and acoustic emission characteristics of rock-like material under non-uniformly distributed loads", Rock Mech. Rock Eng., 51(3), 729-745.
|
13 |
Wang, Y.H., He, X.Q. and Dou, L.M. (2007), "Study on regularity and mechanism of acoustic emission and electromagnetic emission during fracture process of coal samples", Chin. J. Geophys., 50(5), 1569-1575.
|
14 |
Wen, Z., Wang, X., Chen, L., Lin, G. and Zhang, H. (2017), "Size effect on acoustic emission characteristics of coal-rock damage evolution", Adv. Mater. Sci. Eng., 2, 1-8.
DOI
|
15 |
Wen, Z.J, Tan, Y.L, Han, Z.Z. and Meng, F.B. (2016a), "Construction of time-space structure model of deep stope and stability analysis", Polish J. Environ. Stud., 25(6), 2633-2639.
DOI
|
16 |
Hang, Y., Qu, F. and Zhao, Y.S. (2006), "Acoustic emission phenomena of thermal cracking of sandstone", Chin. J. Geotech. Eng., 28(1), 73-75.
|
17 |
Fan, T., Zhou, G. and Wang, J. (2017), "Preparation and characterization of a wetting agglomeration based hybrid coal dust suppressant", Proc. Safety Environ. Protect., 113, 282-291.
|
18 |
Guo, Q.L., Rong, G. and Yao, M. (2015), "Experimental study on acoustic emission behaviors and mechanical properties of thermal damaged marbles", Chin. J. Rock Mech. Eng., 34(2), 3-12.
|
19 |
Hajpal, M. and Torok, A. (2004), "Mineralogical and colour changes of quartz sandstones by heat", Environ. Geol., 46(3-4), 311-322.
DOI
|
20 |
He, M.C., Miao, J.L. abd Feng, J.L. (2010), "Rock burst process of limestone and its acoustic emission characteristics under truetriaxial unloading conditions", J. Rock Mech. Min. Sci., 47(2), 286-298.
DOI
|
21 |
Hu, Z.X., Hu, X.M., Cheng, W.M., Zhao, Y.Y. and Wu, M.Y. (2018b), "Performance optimization of one-component polyurethane healing agent for self-healing concrete", Construct. Build. Mater., 179, 151-159.
DOI
|
22 |
Wen, Z., Wang, X., Tan, Y., Zhang, H., Huang, W. and Li, Q. (2016b), "A study of rock burst hazard evaluation method in coal mine", Shock Vib., (16), 1-9.
|
23 |
Wu, G., Zhai, S.T. and Sun, H. (2014), "Experimental study of acoustic emission of sale rock under high temperature", Chin. J. Rock Mech. Eng., 33(6), 1203-1211.
|
24 |
Xie, H.P., Gao, F. and Ju, Y. (2015), "Research and development of rock mechanics in deep ground engineering", Chin. J. Rock Mech. Eng., 34(11), 2161-2178.
|
25 |
He, X.Q., Nie, B.S., Chen, W.X., Wang, E.Y., Dou, L.M., Wang, Y.H., Liu, M.J. and Mitri, H. (2012), "Research progress on electromagnetic radiation in gas-containing coal and rock fracture and its applications", Saf. Sci., 50(4), 728-735.
DOI
|
26 |
Hu, Z.X., Hu, X.M., Cheng, W.M. and Lu, W. (2018), "Influence of synthetic conditions on the performance of melamine-phenolformaldehyde resin microcapsules", High Perform. Polym., 13, 1-10.
|
27 |
Chmel, A. and Shcherbakov, I. (2015), "Microcracking in impactdamaged granites heated up to 600", J. Geophys. Eng., 12(3), 485-492.
DOI
|
28 |
Zhang, Z.Z. and Gao, F. (2015), "Experimental investigations on energy evolution characteristics of coal, sandstone and granite during loading process", J. Chin. Univ. Min. Technol., 44(3), 416-422.
|
29 |
Zhang, Y., Liang, P., Liu, X., Liu, S. and Tian, B. (2015), "Experimental study on precursor of rock burst based on acoustic emission signal dominant-frequency and entropy", Chin. J. Rock Mech. Eng., 34(S1), 2959-2967.
|
30 |
Zhang, Y., Qu, F. and Zhao, Y.S. (2006), "Acoustic emission phenomena of thermal cracking of sandstone", Chin. J. Geotech. Eng., 28(1), 73-75.
|
31 |
Zhao, H.B., Yin, Z.G. and Chen, L.J. (2009), "Experimental study on effect of temperature on sandstone damage", Chin. J. Rock Mech. Eng., 28(1), 2783-2789.
|
32 |
Zhou, F., Sun, Y., Li, H. and Yu, G. (2016), "Research on the theoretical model and engineering technology of the coal seam gas drainage hole sealing", J. Chin. Univ. Min. Technol., 45(3), 433-439.
|
33 |
Zhou, G., Ma, Y., Fan, T. and Wang, G. (2018), "Preparation and characteristics of a multifunctional dust suppressant with agglomeration and wettability performance used in coal mine", Chem. Eng. Res. Des., 132, 729-742.
DOI
|
34 |
Kong, B., Wang, E.Y., Li, Z.H., Wang, X.R., Liu, J. and Li, N. (2016b), "Fracture mechanical behavior of sandstone subjected to high-temperature treatment and its acoustic emission characteristics under uniaxial compression conditions", Rock Mech. Rock Eng., 49(12), 4911-4918.
DOI
|
35 |
Kong, B., Wang, E., Li, Z., Wang, X., Chen, L. and Kong, X. (2016c), "Nonlinear characteristics of acoustic emissions during the deformation and fracture of sandstone subjected to thermal treatment", J. Rock Mech. Min. Sci., 90, 43-52.
DOI
|
36 |
Kong, B., Wang, E., Li, Z., Wang, X., Niu, Y. and Kong, X. (2017a), "Acoustic emission signals frequency-amplitude characteristics of sandstone after thermal treated under uniaxial compression", J. Appl. Geophys., 136, 190-197.
DOI
|
37 |
Kong, B., Wang, E.Y., Li, Z.H. and Niu, Y. (2017b), "Timevarying characteristics of electromagnetic radiation during the coal-heating process", J. Heat Mass Transfer, 108, 434-442.
DOI
|
38 |
Kong, B., Wang, E.Y., Li, Z.H., Wang, X.R., Liu, X.F., Li, N. and Yang, Y.L. (2016a), "Electromagnetic radiation characteristics and mechanical properties of deformed and fractured sandstone after high temperature treatment", Eng. Geol., 209, 82-92.
DOI
|
39 |
Zhou, G., Zhang, Q., Bai, R., Fan, T. and Wang, G. (2017), "The diffusion behavior law of respirable dust at fully mechanized caving face in coal mine: CFD numerical simulation and engineering application", Process Safety Environ. Protect., 106, 117-128.
DOI
|
40 |
Zhu, T.T., Jing, H.W., Su, H.J., Yin, Q., Du, M.R. and Han, G.S. (2016), "Physical and mechanical properties of sandstone containing a single fissure after exposure to high temperatures", J. Min. Sci. Technol., 26(2), 319-325.
DOI
|
41 |
Kuenzer, C. and Stracher, G.B. (2012), "Geomorphology of coal seam fires", Geomorphology, 138(1), 209-222.
DOI
|
42 |
Liu, Q.S. and Xu, X.C. (2000), "Damage analysis of brittle rock at high temperature", Chin. J. Rock Mech. Eng., 19(4), 408-411.
|
43 |
Novikov, E.A., Oshkin, R.O., Shkuratnik, V.L., Epshtein, S.A. and Dobryakova, N.N. (2018), "Application of thermally stimulated acoustic emission method to assess the thermal resistance and related properties of coals", J. Min. Sci. Technol., 28(2), 243-249.
DOI
|
44 |
Song, D.Z., Wang, E.Y. and Li, Z.H. (2017), "EMR: An effective method for monitoring and warning of rock burst hazard", Geomech. Eng., 12(1), 53-69.
DOI
|
45 |
Ozguven, A. and Ozcelik, Y. (2014), "Effects of high temperature on physico-mechanical properties of Turkish natural building stones", Eng. Geol., 183, 127-136.
DOI
|
46 |
Rabinovitch, A., Bahat, D. and Frid, V. (2002), "Similarity and dissimilarity of electromagnetic radiation from carbonate rocks under compression, drilling and blasting", J. Rock Mech. Min. Sci., 39(1), 125-129.
DOI
|
47 |
Rong, H.R., Bai, H.B. and Wang, Z.S. (2015), "Experimental research on mechanical properties and microstructure change law of red sandstone after different temperatures", Rock Soil Mech., 36(2), 463-469.
|