1 |
Ghasemi, S.H. and Nowak, A.S. (2017b), "Target reliability for bridges with consideration of ultimate limit state", Eng. Struct., 152, 226-237.
DOI
|
2 |
Ghasemi, S.H. and Nowak, A.S. (2016), "Mean maximum values of non-normal distributions for different time period", J. Reliability Safe., 10(2), 99-109.
DOI
|
3 |
Hoshitani, M. and Ishii, K. (1986), Reliability Design Method for Structures, Kajima Publication (in Japanese).
|
4 |
Langford, J.C. and Diederichs, M.S. (2013), "Reliability based approach to tunnel lining design using a modified point estimate method", J. Rock Mech. Min. Sci., 60, 263-276
|
5 |
Li, H.Z. and Low, B.K. (2010), "Reliability analysis of circular tunnel under hydrostatic stress field", Comput. Geotech., 37(1-2), 50-58.
DOI
|
6 |
Liu, X., Hu, X., Guan, L. and Sun, W. (2017), "The ultimate bearing capacity of rectangular tunnel lining assembled by composite segments: An experimental investigation", Steel Compos. Struct., 24(4), 481-497.
DOI
|
7 |
Losada, M.A. and Benedicto, M.I. (2005), "Target design levels for maritime structure", J. Waterway Port Coastal Ocean Eng., 131(4), 171-180.
DOI
|
8 |
Nagao, T., Kadowaki, Y. and Terauchi, K. (2005), "Overall system stability of a breakwater based on reliability design method (First report)-Discussion on the stability against sliding", Proc. Struct. Eng., 51, 389-400.
|
9 |
Nowak, A.S. and Collins K.R. (2013), Reliability of Structures, CRC Press, New York, U.S.A.
|
10 |
Nowak, A.S. and Rakoczy, A.M. (2012), "Statistical resistance models for R/C structural components", ACI SP-284-6, ACI Special Publ., 284, 1-16.
|
11 |
Yang, X.L. and Li, W.T. (2017), "Reliability analysis of shallow tunnel with surface settlement", Geomech. Eng., 12(2), 313-326.
DOI
|
12 |
Rackwitz, R. and Joanni, A. (2009), "Risk acceptance and maintenance optimization of aging civil engineering infrastructures", Struct. Safe.,, 31(3), 251-259.
DOI
|
13 |
Suh, K.D., Kim, K.S. and, Kim, D.L. (2010), "Effects of discount rate and various costs on optimal design of caisson breakwater", KSCE J. Civ. Eng., 14(2), 99-109.
DOI
|
14 |
Trbojevic, V.M. (2009), "Another look at risk and structural reliability criteri", Struct. Safe., 31(3), 245-250.
DOI
|
15 |
Hung, C.J., Monsees, J., Munfah, N. and Wisniewski, J. (2009), Technical Manual for Design and Construction of Road Tunnels-Civil Elements, Report no. FHWA-NHI-10-034, US Department of Transportation, Federal Highway Administration, National Highway Institute, New York, U.S.A.
|
16 |
Yanaka, M., Nowak, A.S. and Ghasemi, S.H. (2016), "Reliabilitybased and life-cycle cost-oriented design recommendations for prestressed concrete bridge girders", Struct. Concrete, 17(5), 836-847.
DOI
|
17 |
Zhang, B., Wang, X., Zhang, J.S. and Meng, F. (2017), "Threedimensional limit analysis of seismic stability of tunnel faces with quasi-static method", Geomech. Eng., 13(2), 301-318.
DOI
|
18 |
Campana, S., Ruiz, M.F. and Muttoni, A. (2014), "Shear strength of arch-shaped members without transverse reinforcement", ACI Struct. J., 111(3), 573-582.
|
19 |
AASHTO, (2014), Bridge Design Specifications, American Association of State Highway and Transportation Officials, Washington, D.C., U.S.A.
|
20 |
ACI 318-14, (2014), Building Code Requirements for Structural Concrete, American Concrete Institute, Farmington Hills, Michigan, U.S.A.
|
21 |
Celik, A.O., Kilinc, K., Tuncan, M. and Tuncan, A. (2012), "Distributions of compressive strength obtained from various diameter cores", ACI Mater. J, 109(6), 597-606.
|
22 |
Chen, H.P. and Xiao, N. (2015), "Symptom-based reliability analyses and performance assessment of corroded reinforced concrete structures", Struct. Eng. Mech., 53(6), 1183-1200.
DOI
|
23 |
Duncan, J. (2000), "Factors of safety and reliability in geotechnical engineering", J. Geotech. Geoenviron. Eng., 126(4), 307-316.
DOI
|
24 |
Ellingwood, B. Galambos, T.V., MacGregor, J.G. and Cornell C.A. (1980), Development of a Probability Based Load Criterion for American National Standard A58, National Bureau of Standards, NBS Special Publication 577, Washington, D.C., U.S.A.
|
25 |
Enevoldsen, I. and Sorensen, J.D. (1994), "Reliability-based optimization in structural engineering", Struct. Safe., 15(3), 169-196.
DOI
|
26 |
Ghasemi, S.H. (2014), "Target reliability analysis for structures", Ph.D. Dissertation, Auburn University, Auburn, U.S.A.
|
27 |
Ghasemi, S.H. and Nowak, A.S. (2017a), "Reliability index for non-normal distributions of limit state functions", Struct. Eng. Mech., 62(3), 365-372.
DOI
|