Browse > Article
http://dx.doi.org/10.12989/gae.2018.14.4.387

Effect of roughness on interface shear behavior of sand with steel and concrete surface  

Samanta, Manojit (Geotechnical Engineering Group, CSIR-Central Building Research Institute)
Punetha, Piyush (Academy of Scientific and Innovative Research, CSIR-Central Building Research Institute)
Sharma, Mahesh (Academy of Scientific and Innovative Research, CSIR-Central Building Research Institute)
Publication Information
Geomechanics and Engineering / v.14, no.4, 2018 , pp. 387-398 More about this Journal
Abstract
The present study evaluates the interface shear strength between sand and different construction materials, namely steel and concrete, using direct shear test apparatus. The influence of surface roughness, mean size of sand particles, relative density of sand and size of the direct shear box on the interface shear behavior of sand with steel and concrete has been investigated. Test results show that the surface roughness of the construction materials significantly influences the interface shear strength. The peak and residual interface friction angles increase rapidly up to a particular value of surface roughness (critical surface roughness), beyond which the effect becomes negligible. At critical surface roughness, the peak and residual friction angles of the interfaces are 85-92% of the peak and residual internal friction angles of the sand. The particle size of sand (for morphologically identical sands) significantly influences the value of critical surface roughness. For the different roughness considered in the present study, both the peak and residual interaction coefficients lie in the range of 0.3-1. Moreover, the peak and residual interaction coefficients for all the interfaces considered are nearly identical, irrespective of the size of the direct shear box. The constitutive modeling of different interfaces followed the experimental investigation and it successfully predicted the pre-peak, peak and post peak interface shear response with reasonable accuracy. Moreover, the predicted stress-displacement relationship of different interfaces is in good agreement with the experimental results. The findings of the present study may also be applicable to other non-yielding interfaces having a similar range of roughness and sand properties.
Keywords
interface; surface roughness; direct shear test; peak interface angle; residual interface angle; constitutive modeling;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 Desai, C.S., Zaman, M.M., Lightner, J.G. and Sirirwardane, H.J. (1984), "Thin-layer element for interfaces joints", J. Numer. Anal. Meth. Geomech., 8(1), 19-43.   DOI
2 Abu-Farsakh, M., Coronel, J. and Tao, M. (2007), "Effect of soil moisture content and dry density on cohesive soil-geosynthetic interactions using large direct shear tests", J. Mater. Civ. Eng., 19(7), 540-549.   DOI
3 Acar, Y.B., Durgunoglu, H.T. and Tumay, M.T. (1982), "Interface properties of sand", J. Geotech. Geoenviron. Eng., 108(GT4).
4 Dove, J.E. and Frost, J.D. (1999), "Peak friction behavior of smooth geomembrane-particle interfaces", J. Geotech. Geoenviron. Eng., 125(7), 544-555.   DOI
5 Aksoy, H.S., Gor, M. and Inal, E. (2016), "A new design chart for estimating friction angle between soil and pile materials", Geomech. Eng., 10(3), 315-324.   DOI
6 ASTM D 3080 (2011), Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions, ASTM international, West Conshohocken, Pennsylvania, U.S.A.
7 Aubry, D., Modaressi, A. and Modaressi, H. (1990), "A constitutive model for cyclic behaviour of interfaces with variable dilatancy", Comput. Geotech., 9(1-2), 47-58.   DOI
8 Basudhar, P.K. (2010), "Modeling of soil-woven geotextile interface behavior from direct shear test results", Geotext. Geomembr., 28(4), 403-408.   DOI
9 Boulon, M. and Nova, R. (1990), "Modelling of soil-structure interface behaviour a comparison between elastoplastic and rate type laws", Comput. Geotech., 9(1-2), 21-46.   DOI
10 Desai, C.S. and Ma, Y. (1992), "Modelling of joints and interfaces using the disturbed-state concept", J. Numer. Anal. Meth. Geomech., 16(9), 623-653.   DOI
11 Butterfield, R. and Andrawes, K.Z. (1972), "On the angles of friction between sand and plane surfaces", J. Terramech., 8(4), 15-23.   DOI
12 Cabalar, A.F. (2016), "Cyclic behavior of various sands and structural materials interfaces", Geomech. Eng., 10(1), 1-19.   DOI
13 Cerato, A. and Lutenegger, A. (2006), "Specimen size and scale effects of direct shear box tests of sands", Geotech. Test. J., 29(6), 507-516.
14 Chen, X., Zhang, J., Xiao, Y. and Li, J. (2015), "Effect of roughness on shear behavior of red clay-concrete interface in large-scale direct shear tests", Can. Geotech. J., 52(8), 1122-1135.   DOI
15 Tatlisoz, N., Edil, T.B. and Benson, C.H. (1998), "Interaction between reinforcing geosynthetics and soil-tire chip mixtures", J. Geotech. Geoenviron. Eng., 124(11), 1109-1119.   DOI
16 Chu, L.M. and Yin, J.H. (2005), "Comparison of interface shear strength of soil nails measured by both direct shear box tests and pullout tests", J. Geotech. Geoenviron. Eng., 131(9), 1097-1107.   DOI
17 Chu, L.M. and Yin, J.H. (2006), "Study on soil-cement grout interface shear strength of soil nailing by direct shear box testing method", Geomech. Geoeng., 1(4), 259-273.   DOI
18 Subba Rao, K.S., Allam, M.M. and Robinson, R.G. (1998), "Interfacial friction between sands and solid surfaces", Proc. Inst. Civ. Eng. Geotech. Eng., 131(2), 75-82.   DOI
19 Sharma, M., Samanta, M. and Sarkar, S. (2016), "A study on comparison of pullout behavior of helical and conventional driven soil nails", Proceedings of the International Geotechnical Engineering Conference on Sustainability in Geotechnical Engineering Practices and Related Urban Issues, Mumbai, India.
20 Sharma, M., Samanta, M. and Sarkar, S. (2017), "A laboratory study on pullout capacity of helical soil nail in cohesionless soil", Can. Geotech. J., 54(10), 1482-1495.   DOI
21 Toufigh, V., Shirkhorshidi, S.M. and Hosseinali, M. (2017), "Experimental investigation and constitutive modeling of polymer concrete and sand interface", J. Geomech., 17(1), 04016043.   DOI
22 Tsubakihara, Y. and Kishida, H. (1993), "Frictional behaviour between normally consolidated clay and steel by two direct shear type apparatuses", Soil. Found., 33(2), 1-13.   DOI
23 Uesugi, M. and Kishida, H. (1986), "Influential factors of friction between steel and dry sands", Soil. Found., 26(2), 33-46.   DOI
24 Yoshimi, Y. and Kishida, T. (1981), "A ring torsion approach for evaluating friction between soil and metal surfaces", Geotech. Test. J., 4(4), 145-152.   DOI
25 Vangla, P. and Latha, G.M. (2016), "Effect of particle size of sand and surface asperities of reinforcement on their interface shear behavior", Geotextiles and Geomembranes, 44(3), 254-268.   DOI
26 Vieira, C.S., Lopes, M.D.L. and Caldeira, L. (2015), "Sand-Nonwoven geotextile interfaces shear strength by direct shear and simple shear tests", Geomech. Eng., 9(5), 601-618.   DOI
27 Wu, W., Wick, H., Ferstl, F. and Aschauer, F. (2008), "A tilt table device for testing geosynthetic interfaces in centrifuge", Geotext. Geomembr., 26(1), 31-38.   DOI
28 Zhang, C., Ji, J., Gui, Y., Kodikara, J., Yang, S.Q. and He, L. (2016), "Evaluation of soil-concrete interface shear strength based on LS-SVM", Geomech. Eng., 11(3), 361-372.   DOI
29 Reddy, K.R., Kosgi, S. and Motan, E.S. (1996), "Interface shear behavior of landfill composite liner systems: A finite element analysis", Geosynth., 3(2), 247-275.   DOI
30 Tejchman, J. and Wu, W. (1995), "Experimental and numerical study of sand-steel interfaces", J. Numer. Anal. Meth. Geomech., 19(8), 513-536.   DOI
31 Shahrour, I. and Rezaie, F. (1997), "An elastoplastic constitutive relation for the soil-structure interface under cyclic loading", Comput. Geotech., 21(1), 21-39.   DOI
32 Dove, J.E. and Jarrett, J.B. (2002), "Behavior of dilative sand interfaces in a geotribology framework", J. Geotech. Geoenviron. Eng., 128(1), 25-37.   DOI
33 Duncan, J.M. and Clough, G.W. (1971), "Finite element analyses of Port Allen lock", J. Soil Mech. Found. Div., 97(8), 1053-1068.
34 Goodman, R.E., Taylor, R.L. and Brekke, T.L. (1968), "A model for the mechanics of jointed rocks", J. Soil Mech. Found. Div., 94(3), 637-659.
35 FHWA (Federal Highway Administration) (2003), Geotechnical Engineering Circular No. 7: Soil Nail Walls-Reference Manual, FHWA Report No. FHWA-NHI-14-007, Washington, D.C., U.S.A.
36 Frost, J.D., DeJong, J.T. and Recalde, M. (2002), "Shear failure behavior of granular-continuum interfaces", Eng. Fract. Mech., 69(17), 2029-2048.   DOI
37 Gireesha, N.T. and Muthukkumaran, K. (2011), "Study on soil structure interface strength property", J. Earth Sci. Eng., 4(6), 89-93.
38 Hu, L. and Pu, J. (2004), "Testing and modeling of soil-structure interface", J. Geotech. Geoenviron. Eng., 130(8), 851-860.   DOI
39 Jewell, R.A. and Wroth, C.P. (1987), "Direct shear tests on reinforced sand", Geotechnique, 37(1), 53-68.   DOI
40 Kishida, H. and Uesugi, M. (1987), "Tests of the interface between sand and steel in the simple shear apparatus", Geotechnique, 37(1), 45-52.   DOI
41 Kondner, R.L. (1963), "Hyperbolic stress-strain response: cohesive soils", J. Soil Mech. Found. Div., 89(1), 115-144.
42 Liu, H., Song, E. and Ling, I.H. (2006), "Constitutive modelling of soil structures interface through the concept of critical state soil mechanics", Mech. Res. Commun., 33(4), 515-531.   DOI
43 Pietruszczak, S. and Stolle, D.F.E. (1987), "Deformation of strain softening materials Part II: Modelling of strain softening response", Comput. Geotech., 4(2), 109-123.   DOI
44 Potyondy, J.G. (1961), "Skin friction between various soil and construction material", Geotechnique, 11(4), 393-353.
45 Reddy, E.S., Chapman, D.N. and Sastry, V.V.R.N. (2000), "Direct shear interface test for shaft capacity of piles in sand", Geotech. Test. J., 23(2), 199-205.   DOI
46 Punetha, P. and Samanta, M. (2017), "Study on deformed microstructure of geosynthetics in interface direct shear test", Proceedings of the 6th Indian Young Geotechnical Engineers Conference, Trichy, India, March.
47 Punetha, P., Mohanty, P. and Samanta, M. (2016), "Study on interface shear strength of soil-geosynthetics in large direct shear box", Proceedings of the 6th Asian Regional Conference on Geosynthetics-Geosynthetics for Infrastructure Development, New Delhi, India, November.
48 Punetha, P., Mohanty, P. and Samanta, M. (2017), "Microstructural investigation on mechanical behavior of soil-geosynthetic interface in direct shear test", Geotext. Geomembr., 45(3), 197-210.   DOI
49 De Gennaro, V. and Frank, R. (2002), "Elasto-plastic analysis of the interface behavior between granular media and structure", Comput. Geotech., 29(7), 547-572.   DOI