Browse > Article
http://dx.doi.org/10.12989/gae.2018.14.3.271

Numerical investigations on stability evaluation of a jointed rock slope during excavation using an optimized DDARF method  

Li, Yong (Geotechnical & Structural Engineering Research Center, Shandong University)
Zhou, Hao (Geotechnical & Structural Engineering Research Center, Shandong University)
Dong, Zhenxing (Geotechnical & Structural Engineering Research Center, Shandong University)
Zhu, Weishen (Geotechnical & Structural Engineering Research Center, Shandong University)
Li, Shucai (Geotechnical & Structural Engineering Research Center, Shandong University)
Wang, Shugang (Geotechnical & Structural Engineering Research Center, Shandong University)
Publication Information
Geomechanics and Engineering / v.14, no.3, 2018 , pp. 271-281 More about this Journal
Abstract
A jointed rock slope stability evaluation was simulated by a discontinuous deformation analysis numerical method to investigate the process and safety factors for different crack distributions and different overloading situations. An optimized method using Discontinuous Deformation Analysis for Rock Failure (DDARF) is presented to perform numerical investigations on the jointed rock slope stability evaluation of the Dagangshan hydropower station. During the pre-processing of establishing the numerical model, an integrated software system including AutoCAD, Screen Capture, and Excel is adopted to facilitate the implementation of the numerical model with random joint network. These optimizations during the pre-processing stage of DDARF can remarkably improve the simulation efficiency, making it possible for complex model calculation. In the numerical investigations on the jointed rock slope stability evaluations using the optimized DDARF, three calculation schemes have been taken into account in the numerical model: (I) no joint; (II) two sets of regular parallel joints; and (III) multiple sets of random joints. This model is capable of replicating the entire processes including crack initiation, propagation, formation of shear zones, and local failures, and thus is able to provide constructive suggestions to supporting schemes for the slope. Meanwhile, the overloading numerical simulations under the same three schemes have also been performed. Overloading safety factors of the three schemes are 5.68, 2.42 and 1.39, respectively, which are obtained by analyzing the displacement evolutions of key monitoring points during overloading.
Keywords
jointed rock mass; slope stability; numerical investigation; DDARF; overloading test;
Citations & Related Records
Times Cited By KSCI : 10  (Citation Analysis)
연도 인용수 순위
1 Li, Y., Zhou, H., Zhu, W.S., Li, S.C. and Liu, J. (2015), "Numerical investigations on slope stability using an elastobrittle model considering fissure water pressure", Arab. J. Geosci., 8(12), 10277-10288.   DOI
2 Li, Y., Zhou, H., Zhu, W.S., Li, S.C. and Liu, J. (2016), "Experimental and numerical investigations on the shear behavior of a jointed rock mass", Geosci. J., 20(3), 371-379.   DOI
3 Liu, S.Y., Shao, L.T. and Li, H.J. (2015), "Slope stability analysis using the limit equilibrium method and two finite element methods", Comput. Geotech., 63, 291-298.   DOI
4 Liu, W.D. (2015), "Scientific understanding of the belt and road initiative of China and related research themes", Prog. Geogr., 34(5), 538-544.
5 Lu, C.Y., Tang, C.L., Chan, Y.C., Hu, J.C. and Chi, C.C. (2014), "Forecasting landslide hazard by the 3D discrete element method: A case study of the unstable slope in the Lushan hot spring district, central Taiwan", Eng. Geol., 183, 14-30.   DOI
6 Ministry of Water Resources of the People's Republic of China (2007), Design Codefor Engineering Slopes in Water Resources and Hydropower Projects, SL386-2007, China Water Power Press, Beijing, China.
7 Morgenstern, N.R. and Price, V.E. (1965), "The analysis of the stability of general slip surfaces", Geotechnique, 15, 79-93.   DOI
8 Nichol, S.L., Hungr, O. and Evans, S.G. (2011), "Large-scale brittle and ductile toppling of rock slopes", Can. Geotech. J., 39(4), 773-788.   DOI
9 Peng, C. (2006), 21st Century China Hydropower Engineering, China Water Power Press, Beijing, China.
10 Qi, C.Q., Wu, J.M., Liu, J. and Kanungo, D.P. (2016), "Assessment of complex rock slope stability at Xiari, southwestern China", Bull. Eng. Geol. Environ., 75(2), 537-550.   DOI
11 Spencer, E. (1967), "A method of analysis of the stability of embankments assuming parallel inter-slice forces", Geotechnique, 17(1), 11-26.   DOI
12 Sarma, S.K. (1973), "Stability analysis of embankments and slopes", Geotechnique, 23, 423-433.   DOI
13 Shi, G.H. (1988), "Discontinuous deformation analysis: A new numerical model for the statics and dynamics of block system", Ph.D. Dissertation, University of California Berkeley, Berkeley, California, U.S.A.
14 Shih, V. (2004), "Development, the second time around: the political logic of developing western China", J. East Asian Stud., 4(3), 427-451.   DOI
15 Sun, J.P., Ning Y.J. and Z.Y. Zhao. (2011), "Comparative study of Sarma's method and the discontinuous deformation analysis for rock slope stability analysis", Geomech. Geoeng., 6(4), 1-10.   DOI
16 Xiao, L.L., Chai, B. and Yin, K.L. (2015), "Rock slope stability evaluation in a steep-walled canyon: Application to elevator construction in the Yunlong River Valley, Enshi, China", Rock Mech. Rock Eng., 48(5), 1969-1980.   DOI
17 Terzi, N.U. and Selcuk, M.E. (2015), "Nonlinear dynamic behavior of pamukcay earthfill dam", Geomech. Eng., 9(1), 83-100.   DOI
18 Wang, C., Tannant, D.D. and Lilly, P.A. (2003), "Numerical analysis of the stability of heavily jointed rock slopes using PFC2D", J. Rock Mech. Min. Sci., 40(3), 415-424.   DOI
19 Wang, S.H. and Ni, P.P. (2013), "Application of block theory modeling on spatial block topological identification to rock slope stability analysis", J. Comput. Meth., 11(1), 390-400.
20 Sarfarazi, V., Haeri, H. and Khaloo, A. (2016). "The effect of nonpersistent joints on sliding direction of rock slopes", Comput. Concrete, 17(6), 723-737.   DOI
21 Cemalettin, O.A., Guzin, G.U. and Yilmaz, O. (2016), "Comparison of Hoek-Brown and Mohr-Coulomb failure criterion for deep open coal mine slope stability", Struct. Eng. Mech., 60(5), 809-828.   DOI
22 Xu, W.J., Xu, Q. and Wang, Y.J. (2013), "The mechanism of highspeed motion and damming of the Tangjiashan landslide", Eng. Geol., 157, 8-20.   DOI
23 Yan, T.Z., Yang, S.A. and Fang, Y.L. (2000), Landslidologies, China University of Geosciences Press, Wuhan, China.
24 Yang, T.H., Shi, W.H., Wang, P.T., Liu, H.L., Yu, Q.L. and Li, Y. (2015), "Numerical simulation on slope stability analysis considering an isotropic properties of layered fractured rocks: A case study", Arab. J. Geosci., 8(8), 5413-5421.   DOI
25 Bishop, A.W. and Morgenstern, N. (1960), "Stability coefficients for earth slopes", Geotechnique, 10, 129-150.   DOI
26 Bonilla-Sierra, V., Scholtes, L., Donze, F.V. and Elmouttie, M.K. (2015), "Rock slope stability analysis using photogrammetric data and DFN-DEM modelling", Acta Geotech., 10(4), 497-511.   DOI
27 Chen, S.H., Xu, M.Y., Shahrour, I. and Egger, P. (2003), "Analysis of arch dams using coupled trial load and block element methods", J. Geotech. Geoenviron., 129(11), 977-986.   DOI
28 Yin, Y., Wang, F. and Sun, P. (2009), "Landslide hazards triggered by the 2008Wenchuan earthquake, Sichuan, China", Landslides, 6(2), 139-152.   DOI
29 Yang, X.L. and Pan, Q.J. (2015), "Three dimensional seismic and static stability of rock slopes", Geomech. Eng., 8(1), 97-111.   DOI
30 Yang, X.L. and Yin, J.H. (2004), "Slope stability analysis with nonlinear failure criterion", J. Eng. Mech., 130(3), 267-275.   DOI
31 Yu, S.J., Liu, R.Z. and Cheng, J.L. (2010), "A minimum travel time ray tracing global algorithm on a triangular net for propagating plane waves", Appl. Geophys., 7(4), 348-356.   DOI
32 Zaruba, Q. and Mencl, V. (1969), Landslide and Their Control, Elsevier, Amsterdam, Holland.
33 Zhang, X.L. (2007), "Study on numerical methods for modelling failure process of semi-continuous jointed rock mass", Ph.D. Dissertation, Chinese Academy of Sciences, Wuhan, China.
34 Zhang, X.L., Jiao, Y.Y. and Zhao, J. (2008), "Simulation of failure process of jointed rock", J. Central South Univ. Technol., 15, 888-894.   DOI
35 Zhao, L.H., Cao, J.Y., Zhang, Y.B. and Luo, Q. (2015), "Effect of hydraulic distribution on the stability of a plane slide rock slope under the nonlinear Barton-Bandis failure criterion", Geomech. Eng., 8(3), 391-414.   DOI
36 Dai, F., Lee, C., Deng, J. and Tham, L. (2005), "The 1786 earthquake-triggered landslide dam and subsequent dam-break flood on the Dadu River, southwestern China", Geomorphology, 65(3-4), 205-221.   DOI
37 Zhao, W., Huang, R. and Yan, M. (2015). "Study on the deformation and failure modes of rock mass containing concentrated parallel joints with different spacing and number based on smooth joint model in PFC", Arab. J. Geosci., 8(10), 7887-7897.   DOI
38 Chen, Y., Li, S., Zhu, W., Zhang, L. and Liu, G. (2013), "New method of ddarf network simulation and its application on highway tunnel", J. Central South Univ., 44(6), 2494-2499.
39 Choi, S.O. and Chung, S.K. (2004), "Stability analysis of jointed rock slopes with the barton-bandis constitutive model in UDEC", J. Rock Mech. Min. Sci., 41(3), 581-586.   DOI
40 Cundall, P.A. and Strack, O.D.L. (1979), "A discrete numerical model for granularassemblies", Geotechnique, 29(1), 47-65.   DOI
41 Duncan, J.M. (1996), "State of the art: Limit equilibrium and finite element analysis of slopes", J. Geotech. Eng., 122(7), 557-596.
42 Florkiewicz, A. and Kubzdela, A. (2009), "Factor of safety in limit analysis of slopes", Geomech. Eng., 5(5), 283-284.
43 Gao, Y.F., Wu D., Zhang F., Lei, G.H., Qin, H.Y. and Qiu, Y. (2016), "Limit analysis of 3D rock slope stability with nonlinear failure criterion", Geomech. Eng., 10(1), 59-76.   DOI
44 Guharay, A. and Baidya, D.K. (2014), "Partial safety factors for retaining walls and slopes: A reliability-based approach", Geomech. Eng., 6(2), 99-115.   DOI
45 Gunther, A., Wienhofer, J. and Konietzky, H. (2012), "Automated mapping of rock slope geometry, kinematics and stability with RSS-GIS", Nat. Hazards, 61(1), 29-49.   DOI
46 Huang, R.Q. and Fan, X.M. (2013), "The landslide story", Nat. Geosci., 6, 325-326.   DOI
47 Zheng, J., Deng, J.H., Zhang, G.Q. and Yang, X.J. (2015), "Validation of Monte Carlo simulation for discontinuity locations in space", Comput. Geotech., 67, 103-109.   DOI
48 Zhu, T.Z. (2009), 20th Century River Hydropower Planning in China, China Electric Power Press, Beijing, China.
49 Hatzor, Y.H., Arzi, A.A., Zaslavsky, Y. and Shapira, A. (2004), "Dynamic stability analysis of jointed rock slopes using DDA method: King Herod's Palace, Masada, Israel", J. Rock Mech. Min. Sci., 41(5), 813-832.   DOI
50 Huang, R.Q. (2009), "Some catastrophic landslides since the twentieth century in the southwest of China", Landslides, 6(1), 69-81.   DOI
51 Hungr, O., Salgado, F.M. and Byrne, P.M. (2011), "Evaluation of a three-dimensional method of slope stability analysis", Can. Geotech. J., 26(4), 679-686.   DOI
52 Janbu, N. (1973), Slope Stability Computations, Wiley, New York, U.S.A.
53 Ji, J. and Liao, H.J. (2014), "Sensitivity-based reliability analysis of earth slopes using finite element method", Geomech. Eng., 6(6), 545-560.   DOI
54 Jiang, Q.H., Qi, Z.F., Wei, W. and Zhou, C.B. (2015), "Stability assessment of a high rock slope by strength reduction finite element method", Bull. Eng. Geol. Environ., 74(4), 1153-1162.   DOI
55 Jiao, Y.Y., Zhang, H.Q., Tang, H.M., Zhang, X.L., Adoko, A.C. and Tian, H.N. (2014a), "Simulating the process of reservoirimpoundment-induced landslide using the extended DDA method", Eng. Geol., 182, 37-48.   DOI
56 Jiao, Y.Y., Zhang, H.Q., Zhang, X.L., Li, H.B. and Jiang, Q.H. (2014b), "A two-dimensional coupled hydromechanical discontinuum model for simulating rock hydraulic fracturing", J. Numer. Anal. Met., 39(5), 457-481.
57 Li, L.C., Tang, C.A., Zhu, W.C. and Liang, Z.Z. (2009), "Numerical analysis of slope stability based on the gravity increase method", Comput. Geotech., 36(7), 1246-1258.   DOI
58 Jiao, Y.Y., Zhang, X.L. and Li, T.C. (2010), Discontinuous Deformation Analysis for Modeling Jointed Rock Failure Process, Science Press, Beijing, China.
59 Latha, G.M. and Garaga, A. (2010), "Stability analysis of a rock slope in Himalayas", Geomech. Eng., 2(2), 125-140.   DOI