1 |
Grady, D.E. (2010), "Length scales and size distributions in dynamic fragmentation", J. Fract., 163(1), 85-99.
DOI
|
2 |
Kim, E. and Oliveira, D.B.M.D. (2015), "The effects of water saturation on dynamic mechanical properties in red and buff sandstones having different porosities studied with Split Hopkinson Pressure Bar (SHPB)", App. Mech. Mater., 752-753, 784-789.
DOI
|
3 |
Abu Bakar, M.Z. and Gertsch, L.S. (2011), "Saturation effects on disc cutting of sandstone", Proceedings of the 45th US Rock Mechanics/Geomechanics Symposium, San Francisco, California, U.S.A., June.
|
4 |
Abu Bakar, M.Z. and Gertsch, L.S. (2013), "Evaluation of saturation effects on drag pick cutting of a brittle sandstone from full scale linear cutting tests", Tunn. Undergr. Sp. Technol., 34, 124-134.
DOI
|
5 |
Duda, M. and Renner, J. (2012), "The weakening effect of water on the brittle failure strength of sandstone", Geophys. J., 192(3), 1091-1108.
|
6 |
ASTM C136-14 (2014), Standard Test Methods for Sieve Analysis of Fine and Coarse Aggregates, ASTM International.
|
7 |
ASTM C33-13 (2013), Standard Specification for Concrete Aggregates, ASTM International.
|
8 |
Bederina, M., Khenfer, M.M., Dheilly, R.M. and Queneudec, M. (2005), "Reuse of local sand: effect of limestone filler proportion on the rheological and mechanical properties of different sand concretes", Cement Concrete Res., 35(6), 1172-1179.
DOI
|
9 |
Changani, H., Young, A. and Kim, E. (2013), "Effect of L/D ratio on dynamic response of aluminum 7076 and the natural Motoqua quartzite sandstone in Saint George, UT using Split Hopkinson Pressure Bar (SHPB)", Proceedings of the 47th US Rock Mechanics/Geomechanics Symposium, San Francisco, California, U.S.A., June.
|
10 |
Dissou, Y. and Didic, S. (2013), Infrastructure and Growth, Springer International Publishing.
|
11 |
Faramarzi, F., Mansouri, H. and Ebrahimi Farsangi, M.A. (2013), "A rock engineering systems based model to predict rock fragmentation by blasting", J. Rock Mech. Min. Sci., 60, 82-94.
|
12 |
Gonilho Pereira, C., Castro-Gomes, J. and Pereira De Oliveira, L. (2009), "Influence of natural coarse aggregate size, mineralogy and water content on the permeability of structural concrete", Construct. Build. Mater., 23(2), 602-608.
DOI
|
13 |
ASTM C125-15b (2015), Standard Terminology Relating to Concrete and Concrete Aggregates, ASTM International.
|
14 |
Grady, D.E. (2008), "Fragment size distributions from the dynamic fragmentation of brittle solids", J. Impact Eng., 35(12), 1557-1562.
DOI
|
15 |
Kumar, P.S., Mannan, M.A., Kurian, V.J. and Achuytha, H. (2007), "Investigation on the flexural behaviour of high-performance reinforced concrete beams using sandstone aggregates", Build. Environ., 42(7), 2622-2629.
DOI
|
16 |
Kim, E. and Oliveira, D.B.M.D. (2016), "The water saturation effects on dynamic tensile strength in red and buff sandstones studied with Split Hopkinson Pressure Bar (SHPB)", Proceedings of the International Conference on Advanced Materials, Structures and Mechanical Engineering, Incheon, South Korea, May.
|
17 |
Kim, J.K., Lee, C.S., Park, C.K. and Eo, S.H. (1997), "The fracture characteristics of crushed limestone sand concrete", Cement Concrete Res., 27(11), 1719-1729.
DOI
|
18 |
Kulatilake, P.H.S.W., Qiong, W., Hudaverdi, T. and Kuzu, C. (2010), "Mean particle size prediction in rock blast fragmentation using neural networks", Eng. Geol., 114(3), 298-311.
DOI
|
19 |
Lundberg, B. (1976), "A split Hopkinson bar study of energy absorption in dynamic rock fragmentation", J. Rock Mech. Min. Sci. Geomech. Abstr., 13(6), 187-197.
DOI
|
20 |
Li, D., Wong, L.N.Y., Liu, G. and Zhang, X. (2012), "Influence of water content and anisotropy on the strength and deformability of low porosity meta-sedimentary rocks under triaxial compression", Eng. Geol., 126, 46-66.
DOI
|
21 |
Noy, M.J. (2012), Automated Rock Fragmentation Measurement with Close Range Digital Photogrammetry, CRC Press.
|
22 |
Perfect, E. (1997), "Fractal models for the fragmentation of rocks and soils: A review", Eng. Geol., 48(3-4), 185-198.
DOI
|
23 |
Qi, C., Wang, M. and Qian, Q. (2009), "Strain-rate effects on the strength and fragmentation size of rocks", J. Impact Eng., 36(12), 1355-1364.
DOI
|
24 |
Radzevicius, R., Velegrakis, A.F. and Bonne, W. (2010), "Marine aggregate extraction regulation in EU member states", J. Coastal Res., 15-37.
|
25 |
Ramesh, K.T., Hogan, J.D., Kimberley, J. and Stickle, A. (2015), "A review of mechanisms and models for dynamic failure, strength, and fragmentation", Planet. Space Sci., 107, 10-23.
DOI
|
26 |
Shockey, D.A., Curran, D.R., Seaman, L., Rosenberg, J.T. and Petersen, C.F. (1974), "Fragmentation of rock under dynamic loads", J. Rock Mech. Min. Sci. Geomech. Abstr., 11(8), 303-317.
DOI
|
27 |
Swift, R.P., Hagelberg, C.R., Carney, T.C., Greening, D. and Hiltl, M. (2000), Modeling Stress-Induced Damage from Impact Recovery Experiments, Los Alamos National Laboratory, EES Division, Los Alamos, NM 87545, New Orleans, Louisiana, U.S.A.
|
28 |
United States Geological Survey (2015), Mineral Commodity Summaries, January 2015
|
29 |
Wang, W. (1999), "Image analysis of aggregates", Comput. Geosci., 25(1), 71-81.
DOI
|
30 |
Virtanti, A.A., Suriamihardja, D.A., Saleh, P. and Ria, I.U. (2013), "Supply and demand of jeneberang river aggregate using multiple regression model", J. Innov. Appl. Stud., 3(3), 774-780.
|
31 |
Wong, L.N.Y. and Jong, M.C. (2013), "Water saturation effects on the Brazilian tensile strength of gypsum and assessment of cracking processes using high-speed video", Rock Mech. Rock Eng., 47(4), 1103-1115.
DOI
|
32 |
Yilmaz, M. and Tugrul, A. (2012), "The effects of different sandstone aggregates on concrete strength", Construct. Build. Mater., 35, 294-303.
DOI
|
33 |
Zhang, Z.X., Kou, S.Q., Yua, J., Yu, Y., Jianga, L.G. and Lindqvist, P.A. (1999), "Effects of loading rate on rock fracture", J. Rock Mech. Min. Sci., 36(5), 597-611.
DOI
|
34 |
Zhang, Z.X., S.Q. Kou, L.G. Jiang and Lindqvist, P.A. (2000), "Effects of loading rate on rock fracture: Fracture characteristics and energy partitioning", J. Rock Mech. Min. Sci., 37(5), 745-762.
DOI
|
35 |
Horvath, A. (2004), "Construction materials and the environment", Annu. Rev. Environ. Res., 29(1), 181-204.
DOI
|
36 |
Hogan, J.D., Rogers, R.J., Spray, J.G. and Boonsue, S. (2012), "Dynamic fragmentation of granite for impact energies of 6-28", J. Eng. Fract. Mech., 79, 103-125.
DOI
|
37 |
Hogan, J.D., Spray, J.G., Rogers, R.J., Vincent, G. and Schneider, M. (2013), "Dynamic fragmentation of planetary materials: Ejecta length quantification and semi-analytical modelling", J. Impact Eng., 62, 219-228.
DOI
|
38 |
Holtz, R.D., Kovacs, W.D. and Sheahan, T.C. (2011), An Introduction to Geotechnical Engineering, Prentice-Hall, New Jersey, U.S.A.
|
39 |
Hudaverdi, T., Kulatilake, P.H.S.W. and Kuzu, C. (2011), "Prediction of blast fragmentation using multivariate analysis procedures", J. Numer. Anal. Meth. Geomech., 35(12), 1318-1333.
DOI
|
40 |
Kim, E. and Changani, H. (2015), "Study of dynamic mechanical behavior of aluminum 7075-T6 with respect to diameters and L/D ratios using Split Hopkinson Pressure Bar (SHPB)", Struct. Eng. Mech., 55(4), 857-869.
DOI
|
41 |
Kim, E. and Changani, H. (2016), "Effect of water saturation and loading rate on the mechanical properties of Red and Buff sandstones", J. Rock Mech. Min. Sci., 88, 23-28.
|